Exposure assessment and associated lung deposition calculations for vehicular exhaust in four metropolitan cities of Pakistan

Ambient aerosol concentrations along the roadside of metropolitan cities of Pakistan were measured using a Grimm 1.109 dust monitor. Considering the high ambient aerosol concentrations, regional lung deposition of aerosol particles in the human respiratory tract was calculated to assess extent of exposure. Lung deposition was computed in terms of mass concentration and the associated surface area for 12 male traffic wardens using the latest version of the stochastic lung deposition code Inhalation, Deposition, and Exhalation of Aerosols in the Lung. The results have revealed 4 to 10 times higher concentrations than recommended by WHO guidelines. The deposition results derived from the model disclose that extrathoracic deposition is in the range of 22 to 28 % with total lung deposition ranging from 40 to 44 % for the scanned particle window of 0.25–10 μm. Considering an average 8-h shift per day and an average breathing rate of 1.3 m³?h^?1, it is approximated that in a worker, up to 1.6 mg of inhalable particle mass can deposit per day.     

Water Quality Evaluation and Trend Analysis in Selected Watersheds of the Atlantic Region of Canada

Water quality indices (WQIs) have been developed to assess the suitability of water for a variety of uses. These indices reflect the status of water quality in lakes, streams, rivers, and reservoirs. The concept of WQIs is based on a comparison of the concentration of contaminants with the respective environmental standards. The number, frequency, and magnitude by which the environmental standards for specific variables are not met in a given time period are reflected in WQIs. Further, the water quality trend analysis predicts the behavior of the water quality parameters and overall water quality in the time domain. In this paper, the concept of WQI was applied to three selected watersheds of Atlantic region: the Mersey River, the Point Wolfe River, and the Dunk River sites. To have robust study, two different water quality indices are used: Canadian Water Quality Index (CWQI), and British Columbia Water Quality Index (BWQI). The complete study was conducted in two steps. The first step was to organize and process the data into a format compatible with WQI analysis. After processing the input data, the WQI was calculated. The second step outlined in the paper discusses detailed trend analysis using linear and quadratic models for all the three sites. As per the 25 years trend analysis, overall water quality for agriculture use observed an improving trend at all the three sites studied. Water quality for raw water used for drinking (prior to treatment) and aquatic uses has shown improving trend at Point Wolfe River. It is further observed that pH, SO₄, and NO₃ concentrations are improving at Dunk River, Mersey River, and Point Wolfe River sites. To ascertain the reliability and significance of the trend analysis, a detailed error analysis and parametric significance tests were also conducted It was observed that for most of the sites and water uses quadratic trend models were a better fit than the linear models.     

Soil properties and crop productivity as influenced by flyash incorporation in soil

Field experiments were carried out during 1996–97at Gulawathi, Muthiani and Salarpur Villages, IARI Farm, NewDelhi and NCPP Campus, Dadri to evaluate changes in soilcharacteristics and growth of wheat (Triticum aestivum L.),mustard (Brassica juncea L.), lentil (Lence esculentaMoench.), rice (Oryza sativa L.) and maize (Zea mays L.) byvarying amounts of flyash addition (up to 50t ha^-1) in soils atsowing/transplanting time of crops. Flyash addition in areasadjoining NCPP Thermal Power Plant, Dadri, Ghaziabad, U.P.ranged from 5–12 t ha^-1 yr^-1 in 1995–96. Shoot and root growthand yield of test crops at different locations after flyashincorporation resulted in beneficial effects of flyashaddition in most cases. The silt dominant texture of flyashimproved loamy sand to sandy loam textures of the surfacesoils at the farmers' fields. The increased growth in yield ofcrops with flyash incorporation was possibly due tomodifications in soil moisture retention and transmissioncharacteristics, bulk density, physico-chemical characterssuch as pH and EC and organic carbon content. The response offlyash addition in the soil on soil health and cropproductivity needs to be evaluated on long-term sustainableaspects.     

The influence of source and timing of nitrogen fertilizers on yield and nitrogen use efficiency of four sweet potato cultivars

Nitrogen (N) availability is a very important determinant of crop yield. It is also one of the most expensive inputs in crop production. Thus, the efficient management of N by farmers with limited resource is a very important part of successful soil and crop management system. A field study was conducted on a Norfolk sandy loam soil at the George Washington Carver Agricultural Experiment Station, Tuskegee, AL, to evaluate the influence of fertilizer source and timing on the yield of four sweet potato [Ipomoea batatas (L.)] cultivars. Two N sources (urea, CO(NH₂)₂ and ammonium nitrate, NH₄NO₃), four sweet potato cultivars (‘Georgia Jet’, GA-Jet; ‘TU-82-155’, TU-155; ‘TU-1892’; and ‘Rojo Blanco’, Rojo-Bl) and three times (zero, single, and split applications) were used in a factorial designed experiment. Plants were harvested after 80 and 120 days and total and marketable yields determined. Nitrogen recovery efficiency, yield efficiency and physiological efficiency were also determined. Total and marketable yields of early maturing cultivars were significantly higher than of late maturing cultivars (P<0.05). The single application of N resulted in significantly higher yield in storage roots than split application (P<0.05). Physiological efficiency values were highly correlated with total marketable yields. Recovery rates increased with time. Late maturing cultivars tended to have higher N recovery and physiological efficiency than early maturing cultivars. These results suggest that cultivar maturity group should play an important part in N fertilization recommendations for sweet potato.     

Prevalence of Rotaviruses Groups A and C in Egyptian Children and Aquatic Environment

The objective of this study is to compare the prevalence of rotaviruses groups A and C in Egyptian children and aquatic environment. From 110 stool specimens of children with acute diarrhea and using RT-PCR, 35 samples (31.8 %) were positive for human rotavirus group A and 15 samples (13.6 %) were positive for human rotavirus group C. From 96 samples collected from Zenin wastewater treatment plant over a 2-year period (November 2009–October 2011) and using RT-PCR, rotavirus group A was detected in (4/24) 16.7 %, (5/24) 20.8 %, (4/24) 16.7 %, and (4/24) 16.7 %, while rotavirus group C was detected in (2/24) 8.3 %, (3/24) 12.5 %, (3/24) 12.5 %, and (0/24) 0 % in raw sewage, after primary sedimentation, after secondary sedimentation, and after final chlorination, respectively. Moreover, from 96 samples collected from El-Giza water treatment plant over a 2-year period (November 2009–October 2011), rotavirus group A was detected in (7/24) 29.2 %, (6/24) 25 %, (5/24) 20.8 %, and (3/24) 12.5 %, while rotavirus group C was detected in (3/24) 12.5 %, (1/24) 4.2 %, (1/24) 4.2 %, and (0/24) 0 % in raw Nile water, after sedimentation, after sand filtration, and after final chlorination, respectively. Using SYBR Green real-time RT-PCR, the number of human rotavirus group A genome or infectious units was higher than rotavirus group C. VP6 sequence analysis of the RT-PCR positive rotavirus group C samples revealed that four clinical specimens and three environmental samples showed similar sequences clustered with Moduganari/Human Nigerian strain AF 325806 with 98 % homology, and two clinical specimens and one environmental sample showed similar sequences clustered with Dhaka CB/Human Bangladesh strain AY 754826 with 97 % homology.     

Investigation of physico-chemical properties and microbial community during poultry manure co-composting process

Co-composting of poultry manure and rubber wood sawdust was performed with the ratio of 2:1(V/V) for a period of 60 days. An investigation was carried out to study the extracellular enzymatic activities and structural degradation utilizing Fourier transform infrared spectroscopy(FT-IR), thermogravimetry and differential thermal analysis(TG/DTA)and scanning electron microscopy(SEM). The microbial succession was also determined by using denaturing gel gradient electrophoresis(DGGE). The compost was able to reach its highest temperature of 71°C at day 3 and stabilized between 30 and 40°C for 8 weeks.CMCase, FPase and β-glucosidase acted synergistically in order to degrade the cellulosic substrate. The xylanase activities increased gradually during the composting and reached the peak value of 11.637 U/g on day 35, followed by a sharp decline. Both Li P and Mn P activities reached their peak values on day 35 with 0.431 and 0.132 U/g respectively. The FT-IR spectra revealed an increase in aromaticity and a decrease in aliphatic compounds such as carbohydrates as decomposition proceeded. TGA/DTG data exhibited significant changes in weight loss in compost samples, indicating degradation of organic matter. SEM micrographs showed higher amounts of parenchyma exposed on the surface of rubber wood sawdust at day 60, showing significant degradation. DGGE and 16 S r DNA analyses showed that Burkholderia sp., Pandoraea sp., and Pseudomonas sp. were present throughout the composting process. Ornithinibacillus sp. and Castellaniella ginsengisoli were only found in the initial stage of the composting, while different strains of Burkholderia sp. also occurred in the later stage of composting.     

Seasonal occurrence of the yellow stem borer Scirpophaga incertulas (Walker) on deepwater rice in Bangladesh and Thailand

Deepwater rice is grown in South and Southeast Asia on 11 million hectares flooded deeply during the monsoon. Surveys for the incidence of stem borers in deepwater rice in Bangladesh from 1977 to 1980, and in Thailand during 1981 and 1982, showed that borer incidence and species composition were remarkably similar. Scirpophaga incertulas (Walker) usually comprised more than 90% of the borer population and was almost exclusively present during the main flooding period. Chilo polychrysus (Meyr.) comprised 11% and Sesamia inferens (Walker) 6% of the population in the pre-flood and ripening stages.Low borer activity in the early part of the season was explained by a low nucleus population, the synchronous planting of deepwater rice, and severe moisture stress and high temperatures in the pre-flood period. In Bangladesh, a severe drought in 1979 limited Scirpophaga incertulas populations to unusually low levels until the flowering stage. In Thailand, drier conditions, the lack of an intervening rice crop in the dry season and a longer pre-flood period, appeared to severely restrict early season borer activity. The onset of flooding and stem elongation provided a more favourable environment for S. incertulas. Borer activity increased steadily during the first 3–4 months of flooding, to average 23% damaged stems (26 m^?2) and 13 borer immature stages/100 stems (13 m^?2) by the flowering stage. Borer activity continued at about the same level as the water receded, to reach maximum annual levels of 38–44% damaged stems (35 m^?2) at the late-ripening stage. At harvest, 60% of the fields were at outbreak level (>40% damaged stems). Such high levels of damage are explained by the long growth period of deepwater rice, favourable weather during the flooding period, and the optimum habitat of the elongated stem. S. incertulas populations then crashed to low levels; the larvae entering diapause in the field stubble. Although related to actual damage, the deadheart and whitehead symptoms grossly under-estimated the extent of stem damage.     

Phytoremediation of an arsenic-contaminated site using Pteris vittata L. and Pityrogramma calomelanos var. austroamericana: a long-term study

This field study investigated the phytoremediation potential of two arsenic (As) hyperaccumulating fern species, Pityrogramma calomelanos var. austroamericana and Pteris vittata over 27-month duration at a disused As-contaminated cattle-dip site located at Wollongbar, NSW, Australia. Ferns planted in January 2009 were harvested following 10, 22 and 27 months of growth. A detailed soil sampling was undertaken in June 2009 (initial, n?=?42 per plot) and limited sampling in April 2011 (after 27 months, n?=?15 per plot) to measure total and phosphate-extractable As concentrations in soil at 0?-?20-, 20?-?40- and 40?-?60-cm depths. The choice of the limited number of samples was considered sufficient to estimate the changes in soil As concentration following phytoremediation based on a geostatistical model. The average frond dry biomass, As concentration and As uptake were significantly (P??0.05), respectively, by P. vittata. Our results show that phytoremediation time based on observed changes in soil As based on limited sampling is not reliable; hence, it is recommended that the frond As uptake should be considered in order to evaluate the phytoremediation efficiency of the two fern species at the experimental site. Using As uptake of the two fern species, we estimate that with P. calomelanos var. austroamericana it would take 55?-?125 years to decrease mean total As content below the ecological investigation level (20 mg kg(-1)) in the surface and subsurface soils, whereas with P. vittata 143?-?412 years would be required to achieve this target.     

Biodegradation of high molecular weight PAHs using isolated yeast mixtures: application of meta-genomic methods for community structure analyses

Bioaugmentation for the removal of polyaromatic hydrocarbons (PAHs) from wastewater using bacteria and yeasts is considered environment-friendly and a cost-effective technique. The effectiveness of this biodegradation system depends on the stability of inoculated microorganisms and the availability of nutrients. This study is aimed to investigate the removal of high molecular weight (HMW)-PAHs from biologically treated produced water using different biological systems. Three systems, inoculated with activated sludge (AS), the mixture of five yeast strains (MY), and the mixture of AS and the five yeast strains (SY), respectively, were constructed, and their performance for the removal of HMW-PAHs was compared over 10 weeks. The effluent of the biologically treated produced water from an oilfield was used as the influent after chrysene and benzo(a)pyrene were spiked as HMW-PAHs. Polymerase chain reaction-based denaturing gradient gel electrophoresis (PCR-DGGE) and fluorescent in situ hybridization (FISH) techniques were used to examine the changes in the structures and abundances of the bacterial and yeast communities in these three systems. Only SY and MY systems were capable to remove chrysene (90.7 % and 98.5 %, respectively) and benzo(a)pyrene (80.7 % and 95.2 %, respectively). PCR-DGGE analysis confirmed that all of the five yeast strains inoculated remained in the SY and MY systems, while FISH results showed that the relative abundance of yeast in the SY and MY systems (10.6 % to 21.9 %, respectively) were significantly higher than AS system (2.3 % to 7.8 %, respectively). The relative abundances of the catechol 2,3-dioxygenase (C23O) indicated that the copy number ratios of benzene ring cleavage gene C23O in the yeast amended systems were much higher than that in the AS system. In this study, all of the three systems were effective in removing the low molecular weight (LMW)-PAHs, while HMW-PAHs including chrysene and benzo(a)pyrene were efficiently removed by MY and SY systems, not by AS system. The high HMW-PAHs removal in the MY and SY bioaugmentation systems possibly attributed to the inoculation of the mixed yeast culture. By combining the PCR-DGGE results with the FISH analyses, it was found that yeast probably consisting mainly of the five inoculated strains inhabited in the two bioaugmentation systems as a dominant population. The relatively higher performance of the SY system might be attributed to the suspended growth type which permitted a more efficient contact between microbial cells and contaminants. The bioaugmentation systems (SY and MY) were successfully established by inoculating with five nonindigenous yeast strains and demonstrated high performance in removal of HMW-PAHs.