Use of waste gypsum to replace natural gypsum as set retarders in portland cement

The present study is focused on clarifying the influence of waste gypsum (WG) in replacing natural gypsum (NG) in the production of ordinary Portland cement (OPC). WG taken from slip casting moulds in a ceramic factory was formed from the hydration of plaster of paris. Clinker and 3–5 wt% of WG was ground in a laboratory ball mill to produce cement waste gypsum (CMWG). The same procedure was repeated with NG to substitute WG to prepare cement natural gypsum (CMNG). The properties of NG and WG were investigated via X-ray Diffraction (XRD), X-ray fluorescence (XRF) and differential scanning calorimetry (DSC)/thermogravimetric (TG) to evaluate the properties of CMNG and CMWG. The mechanical properties of cement were tested in terms of setting time, flexural and compressive strength. The XRD result of NG revealed the presence of dihydrate while WG contained dihydrate and hemihydrate. The content of dihydrate and hemihydrates were obtained via DSC/TG, and the results showed that WG and NG contained 12.45% and 1.61% of hemihydrate, respectively. Furthermore, CMWG was found to set faster than CMNG, an average of 15.29% and 13.67% faster for the initial and final setting times, respectively. This was due to the presence of hemihydrate in WG. However, the values obtained for flexural and compressive strength were relatively the same for CMNG and CMWG. Therefore, this result provides evidence that WG can be used as an alternative material to NG in the production of OPC.     

Assessment of organochlorine pesticides and plasticisers in the Selangor River basin and possible pollution sources

A study on the quality of water abstracted for potable use was conducted in the Selangor River basin from November 2008 to July 2009. Seven sampling sites representing the intake points of water treatment plants in the basin were selected to determine the occurrence and level of 15 organochlorine pesticides (OCPs), six phthalate esters (PAEs) and bisphenol A (BPA). Results indicated OCPs were still detected regularly in 66.1 % of the samples with the Σ₁₅OCPs ranging from 0.6–25.2 ng/L. The first data on PAEs contamination in the basin revealed Σ₆PAEs concentrations were between 39.0 and 1,096.6 ng/L with a median concentration of 186.0 ng/L while BPA concentration ranged from <1.2 to 120.0 ng/L. Although di-n-butyl phthalate was detected in all the samples, concentrations of di-ethyl(hexyl)phthalate were higher. Sampling sites located downstream recorded the highest concentrations, together with samples collected during the dry season. Comparison of the detected contaminants with the Department of Environment Water Quality Index (DOE-WQI) showed some agreement between the concentration and the current classification of stream water. While the results suggest that the sites were only slightly polluted and suitable to be used as drinking water source, its presence is cause for concern especially to the fragile firefly “Pteroptyx tener” ecosystem located further downstream.     

Institutional isomorphism and environmental sustainability: a new framework from the Shariah perspective

Environment, Development and Sustainability - Islam emphasizes the importance of environmental care, as prescribed in its primary sources of Shariah, the Quran and the authenticated actions and...     

Optimization of co-digestion of various industrial sludges for biogas production and sludge treatment: Methane production potential experiments and modeling

Optimal biogas production and sludge treatment were studied by co-digestion experiments and modeling using five different wastewater sludges generated from paper, chemical, petrochemical, automobile, and food processing industries situated in Ulsan Industrial Complex, Ulsan, South Korea. The biomethane production potential test was conducted in simplex-centroid mixture design, fitted to regression equation, and some optimal co-digestion scenarios were given by combined desirability function based multi-objective optimization technique for both methane yield and the quantity of sludge digested. The co-digestion model incorporating main and interaction effects among sludges were utilized to predict the maximum possible methane yield. The optimization routine for methane production with different industrial sludges in batches were repeated with the left-over sludge of earlier cycle, till all sludges have been completely treated. Among the possible scenarios, a maximum methane yield of 1161.53 m³ is anticipated in three batches followed by 1130.33 m³ and 1045.65 m³ in five and two batches, respectively. This study shows a scientific approach to find a practical solution to utilize diverse industrial sludges in both treatment and biogas production perspectives.     

Landing in basal frogs: evidence of saltational patterns in the evolution of anuran locomotion

All frogs are assumed to jump in a similar manner by rapidly extending hindlimbs during the propulsive phase and rotating the limbs forward during flight in order to land forelimbs first. However, studies of jumping behavior are lacking in the most primitive living frogs of the family Leiopelmatidae. These semi-aquatic or terrestrial anurans retain a suite of plesiomorphic morphological features and are unique in using an asynchronous (trot-like) rather than synchronous “frog-kick” swimming gait of other frogs. We compared jumping behavior in leiopelmatids to more derived frogs and found that leiopelmatids maintain extended hindlimbs throughout flight and landing phases and do not land on adducted forelimbs. These “belly-flop” landings limit the ability for repeated jumps and are consistent with a riparian origin of jumping in frogs. The unique behavior of leiopelmatids shows that frogs evolved jumping before they perfected landing. Moreover, an inability to rapidly cycle the limbs may provide a functional explanation for the absence of synchronous swimming in leiopelmatids.     

Intracellular biosynthesis of Au and Ag nanoparticles using ethanolic extract of Brassica oleracea L. and studies on their physicochemical and biological properties

In this present study, we reported broccoli(Brassica oleracea L.) as a potential candidate for the synthesis of gold and silver nanoparticles(NPs) in green chemistry method. The synthesized metal nanoparticles are evaluated their antimicrobial efficacy against different human pathogenic organisms. The physico-chemical properties of gold nanoparticles were analyzed using different analytical techniques such as a UV–Vis spectrophotometer, Field Emission Scanning Electron Microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction and a Fourier Transform Infrared spectrophotometer. In addition, gold and silver NP antimicrobial efficacy was checked by disc diffusion assay. UV–Vis color intensity of the nanoparticles was shown at 540 and 450 nm for gold and silver nanoparticles respectively. Higher magnification of the Field Emission Scanning Electron Microscopy image shows the variable morphology of the gold nanoparticles such as spherical, rod and triangular shapes and silver nanoparticles were seen in spherical shapes. The average spherical size of the particles was observed in 24–38 nm for gold and 30–45 nm for silver NPs. X-ray diffraction pattern confirmed the presence of gold nanoparticles and silver nanoparticles which were crystalline in nature. Additionally,the functional metabolites were identified by the Fourier Transform Infrared spectroscopy. IR spectra revealed phenols, alcohols, aldehydes(sugar moieties), vitamins and proteins are present in the broccoli extract which are accountable to synthesize the nanoparticles. The synthesized gold and silver NPs inhibited the growth of the tested bacterial and fungal pathogens at the concentration of 50 μg/m L respectively. In addition, broccoli mediated gold and silver nanoparticles have shown potent antimicrobial activity against human pathogens.     

Critical success factors of sustainable manufacturing practices in Malaysian automotive industry

The purpose of this study is to examine the critical success factors of sustainable manufacturing practices (SMPs) in Malaysian automotive industry. The questionnaires were designed and distributed to the 50 respondents. The pilot study sample consists of 26 respondents from 50 questionnaires, with an average response rate of 52%. The results of reliability analysis show that social responsibility is critical factor influencing the direct SMPs implementation success. By implementing SMPs in Malaysian automotive industry, it can assist company to improve the quality of management. Thus, this study recommends that the future research explore the influence of SMPs on sustainable performance in Malaysian automotive industry.     

Decision support model to select crop pattern for sustainable agricultural practices using fuzzy MCDM

The crop pattern has a significant impact on the feasibility of sustainable agricultural practices. Selected crop pattern influences environmental and economic condition and affects sustainability profoundly in agricultural practices. Hence, a careful intervention is required in the selection of an optimal crop pattern for sustainable agricultural practices. Selection of a particular set of crop pattern depends on many criteria that may vary from place to place thus pose challenges in deciding an optimum crop pattern. The present research focuses on the crop selection pattern in Indian environment that considers comprehensive criteria related to sustainable farming practices. Based on the in-depth review of the literature and experts opinion, comprehensive criteria related to sustainable farming practices for Ravi season crop are identified. Total twelve criteria covering socioeconomic conditions, soil and water conditions, environmental and climatic conditions are earmarked and taken into account for eight most commonly grown crops in Ravi season and later on modeled to determine the crop pattern for most needed sustainability. A fuzzy-based multi-criteria decision-making model has been developed considering the Indian farming system. The scarce resources availability to Indian farmers poses many challenges to practice farming with most needed sustainability. The present research will be useful in the area of Indian farming practices in particular and global farming practices in general. It will also help stakeholders in their cost effective decision making for better crop productivity leading to sustainable farming practices. Additionally, the state policy makers will be able to formulate effective state driven sustainable farming policy to enhance its stake in gross domestic product to become self-reliance.     

Geo-accumulation index and contamination factors of heavy metals (Zn and Pb) in urban river sediment

The aim of the present study was to appraise the levels of heavy metal contamination (Zn and Pb) in sediment of the Langat River (Selangor, Malaysia). Samples were collected randomly from 15 sampling stations located along the Langat River. The parameters measured were pH, redox potential, salinity, electrical conductivity, loss of ignition, cation exchanges capacity (Na, Mg, Ca, K), and metal ions (Zn and Pb). The geo-accumulation index (I _geo) and contamination factor (C _f) were applied to determine and classify the magnitude of heavy metal pollution in this urban river sediment. Results revealed that the I _geo of Pb indicated unpolluted to moderately polluted sediment at most of the sampling stations, whereas Zn was considered to be within background concentration. The I _geo results were refined by the C _f values, which showed Pb with very high C _f at 12 stations. Zinc, on the other hand, had low to moderate C _f values. These findings indicated that the sediment of the Langat River is severely polluted with Pb. The Zn concentration at most sampling points was well below most sediment quality guidelines. However, 40% of the sampling points were found to have a Pb concentration higher than the consensus-based probable effect concentration of 128 mg/kg (concentrations above this value are likely to cause harmful effects). This result not only highlights the severity of Pb pollution in the sediment of the Langat River, but also the potential risk it poses to the environment.