Agricultural Land Use and Best Management Practices to Control Nonpoint Water Pollution

In recent years, improvements in point-source depuration technologies have highlighted the problems regarding agricultural nonpoint (diffuse) sources, and this issue has become highly relevant from the environmental point of view. The considerable extension of the areas responsible for this kind of pollution, together with the scarcity of funds available to local managers, make minimizing the impacts of nonpoint sources on a whole basin a virtually impossible task. This article presents the results of a study intended to pinpoint those agricultural areas, within a basin, that contribute most to water pollution, so that operations aimed at preventing and/or reducing this kind of pollution can be focused on them. With this aim, an innovative approach is presented that integrates a field-scale management model, a simple regression model, and a geographic information system (GIS). The Lake Vico basin, where recent studies highlighted a considerable increase in the trophic state, mainly caused by phosphorus (P) compounds deriving principally from the intensive cultivation of hazelnut trees in the lake basin, was chosen as the study site. Using the management model Groundwater Loading Effects of Agricultural Management Systems (GLEAMS), the consequences, in terms of sediment yield and phosphorus export, of hazelnut tree cultivation were estimated on different areas of the basin with and without the application of a best management practice (BMP) that consists of growing meadow under the trees. The GLEAMS results were successively extended to basin scale thanks to the application of a purposely designed regression model and of a GIS. The main conclusions can be summarized as follows: The effectiveness of the above-mentioned BMP is always greater for erosion reduction than for particulate P reduction, whatever the slope value considered; moreover, the effectiveness with reference to both particulate P and sediment yield production decreases as the slope increases. The proposed approach, being completely distributed, represents a considerable step ahead compared to the semidistributed or lumped approaches, which are traditionally employed in research into tools to support the decision-making process for land-use planning aimed at water pollution control.     

Bioethanol-gasoline fuel blends: exhaust emissions and morphological characterization of particulate from a moped engine

This study was aimed at evaluating the effects of gasoline-ethanol blends on the exhaust emissions in a catalyst-equipped four-stroke moped engine. The ethanol was blended with unleaded gasoline in at percentages (10, 15, and 20% v/v). The regulated pollutants and the particulate matter emissions were evaluated over the European ECE R47 driving cycle on the chassis dynamometer bench. Particulate matter was characterized in terms of total mass collected on filters and total number ofparticles in the range 7 nm-10 microm measured by electrical low-pressure impactor (ELPI). In addition, particle-phase polycyclic aromatic hydrocarbons (PAHs) emissions were evaluated to assess the health impact of the emitted particulate. Finally, an accurate morphological analysis was performed on the particulate by high-resolution transmission electron microscope (TEM) equipped with a digital image-processing/data-acquisition system. In general, CO emission reductions of 60-70% were obtained with 15 and 20% v/v ethanol blends, while the ethanol use did not reduce hydrocarbon (HC) and NOx emissions. No evident effect of ethanol on the particulate mass emissions and associated PAHs emissions was observed. Twenty-one PAHs were quantified in the particulate phase with emissions ranging from 26 to 35 microg/km and benzo[a]pyrene equivalent (BaPeq) emission factors from 2.2 to 4.1 microg/km. Both particulate matter and associated PAHs with higher carcinogenic risk were mainly emitted in the submicrometer size range (<0.1 microm). On the basis of the TEM observations, no relevant effect of the ethanol use on the particulate morphology was evidenced, showing aggregates composed ofprimary particles with mean diameters in the range 17.5-32.5 nm.     

Pesticide distribution in an agricultural environment in Argentina

An assessment of the off-site migration of pesticides from agricultural activity into the environment in the Neuquen River Valley was performed. The aim of this study was to evaluate the distribution of pesticides in several compartments of a small agricultural sub-catchment. Soil, surface water, shallow groundwater and drift deposition were analyzed for pesticide residues. Results showed the presence of some pesticide residues in soil, surface water and shallow groundwater compartments. The highest detection frequencies in water (surface and subsurface) were found for azinphos-methyl and chlorpyrifos (>70%). In terms of concentration, the highest levels were observed in shallow groundwater for azinphos methyl (22.5 μg/L) and carbaryl (45.7 μg/L). In the soil, even before the application period had started, accumulation of residues was present. These residues increased during the period studied. Spray drift during pesticide application was found to be a significant pathway for the migration of pesticide residues in surface water, while leaching and preferential flows were the main transport routes contributing to subsurface contamination.     

Evaluation of disinfectants in order to eliminate fungal contamination in computer keyboards of an integrated health center in Piauí, Brazil

This quantitative and qualitative study aimed to evaluate the level of fungal contamination in computer keyboards from an Integrated Health Center (IHC) at Piauí, Brazil, and to evaluate the efficacy of 50% sodium bicarbonate and 50% alcoholic vinegar solutions to eliminate these microorganisms. Ten keyboards from six sectors of the IHC were chosen randomly, and the collection was performed in three situations: (i) before of disinfection, (ii) after disinfection with solution of sodium bicarbonate, and (iii) after disinfection with solution of alcoholic vinegar. Samples were inoculated in Petri dishes with dextrose agar potato plus chloramphenicol and incubated at room temperature for 72 h. All keyboards were contaminated with opportunistic fungi, with Cladosporium cladosporioides (29.4%) being the most frequent species, followed by Curvularia lunata (17.6%) and Aspergillus niger, Alternaria alternata, and Curvularia clavata with 11.8% each. The two solutions were proven to be efficient in eliminating fungal contamination; however, the sodium bicarbonate solution caused esthetic damages in keyboards. In addition, this study is the first report of the antifungal activity of alcoholic vinegar in filamentous fungi. Based on our findings, we suggest a daily disinfection of keyboards with a 50% vinegar solution plus adequate hygiene from the hands of professionals before and after the use of the computer and its annexes, as key actions to reduce nosocomial infections, particularly in economically disadvantaged countries.     

A rapid method for screening of the Stockholm Convention POPs in small amounts of human plasma using SPE and HRGC/HRMS

A rapid analytical screening method allowing simultaneous analysis of 23 persistent organic pollutants (POPs) in human plasma was developed. Sample preparation based on solid-phase extraction (SPE) with additional clean-up using small multilayer silica gel columns. SPE was performed using a custom made polystyrene-divinylbenzene sorbent for the extraction of chlorinated and brominated POPs. Special efforts to reduce sample volume and improve speed and efficiency of the analytical procedure were made. Determination of 16 polychlorinated biphenyls (PCBs), 5 organochlorine (OC) pesticides, octachlorinated dibenzo-p-dioxin (OCDD) and polybrominated diphenyl ether (BDE #47) in 0.5 mL human plasma was performed by using high resolution gas chromatography coupled to high resolution mass spectrometry (HRGC/HRMS). Recovery of POPs ranged between 46% and 110%, and reproducibility was below 25% relative standard deviation (RSD) for all target compounds, except for trans-nonachlor and OCDD, which were present only at low levels. Limits of detection (LOD) were for the PCBs between 0.8 and 117.7 pg mL⁻¹ plasma and for the OC pesticides between 5.9 and 89.1 pg mL⁻¹ plasma. The LOD for OCDD and BDE #47 were 1.4 pg mL⁻¹ plasma, and 9.2 pg mL⁻¹ plasma, respectively. The presented method was successfully applied to 1016 human plasma samples from an epidemiological study on cardiovascular disease.     

Polycyclic aromatic hydrocarbon exhaust emissions from different reformulated diesel fuels and engine operating conditions

The study of light-duty diesel engine exhaust emissions is important due to their impact on atmospheric chemistry and air pollution. In this study, both the gas and the particulate phase of fuel exhaust were analyzed to investigate the effects of diesel reformulation and engine operating parameters. The research was focused on polycyclic aromatic hydrocarbon (PAH) compounds on particulate phase due to their high toxicity. These were analyzed using a gas chromatography–mass spectrometry (GC–MS) methodology.Although PAH profiles changed for diesel fuels with low-sulfur content and different percentages of aromatic hydrocarbons (5–25%), no significant differences for total PAH concentrations were detected. However, rape oil methyl ester biodiesel showed a greater number of PAH compounds, but in lower concentrations (close to 50%) than the reformulated diesel fuels. In addition, four engine operating conditions were evaluated, and the results showed that, during cold start, higher concentrations were observed for high molecular weight PAHs than during idling cycle and that the acceleration cycles provided higher concentrations than the steady-state conditions. Correlations between particulate PAHs and gas phase products were also observed.The emission of PAH compounds from the incomplete combustion of diesel fuel depended greatly on the source of the fuel and the driving patterns.     

Degradation of cyprodinil, fludioxonil, cyfluthrin and pymetrozine on lettuce after different application methods

Degradation of two fungicides (cyprodinil and fludioxonil) and two insecticides (cyfluthrin and pymetrozine) applied on iceberg and romaine lettuce under field conditions with different methods (portable mistblower and chemigation) was studied field data showed that both distribution methods and lettuce cultivar affect the degradation trends of examined pesticides. In these trials the residues of all active ingredients after pre-harvest time were less than fifty's maximum residue levels; the values in the romaine cultivar were generally higher than those in iceberg lettuce. After pre-harvest time residues of pesticides applied on romaine lettuce by portable motor sprayer were always higher than those obtained by the chemigation system.     

Agricultural nitrate monitoring in a lake basin in Central Italy: a further step ahead towards an integrated nutrient management aimed at controlling water pollution

Water pollution from point sources has been considerably reduced over the last few decades. Nevertheless, some water quality problems remain, which can be attributed to non-point pollution sources, and in particular to agriculture. In this paper the results of a study intended to assess the consequences, in terms of NO₃ water pollution, of growing a crop, whose impact in terms of P pollution is already well known, are presented. The potential consequences, in terms of water pollution from nitrates of a BMP expressly applied to reduce P pollution are also discussed. The study site is the Lake Vico basin, Central Italy, which has suffered a shift in trophic state since the mid 1990s, caused by P compounds used for intensive cultivation of hazelnut trees. The results of the monitoring campaign described in this paper allow to assert that hazelnut tree cropping has probably caused a considerable increase in nitrate concentration in the groundwater, although not in the lake water, because of the specific hydrogeological characteristics of the basin. The main conclusion is that monitoring is essential to single out environmental characteristics peculiar of a specific area, which even the most sophisticated model would not have been able to highlight. This is why monitoring and model simulations should be integrated.     

Benthic foraminiferal response to trace element pollution—the case study of the Gulf of Milazzo, NE Sicily (Central Mediterranean Sea)

The response of benthic foraminiferal assemblages to trace element pollution in the marine sediments of the Gulf of Milazzo (north-eastern Sicily) was investigated. Since the 1960s, this coastal area has been a preferred site for the development of two small marinas and a commercial harbour as well as for heavy industry. Forty samples collected in the uppermost 3–4 cm of an undisturbed layer of sediment in the littoral environment were used for this benthic foraminiferal analysis. The enrichment factors (EFs) of selected trace elements (As, Co, Cr, Cu, Mn, Ni, Pb and Zn) were also calculated. Changes both in benthic foraminiferal assemblages and in some trace elements concentrations have provided evidence that the gulf’s littoral zone can be subdivided into three sectors characterised by environmental changes in the marine ecosystem. In the sector unpolluted, close to the Milazzo Cape, foraminiferal assemblages exhibit high values of species richness and foraminiferal density while trace element concentrations and their EFs are very low. Here, the highest densities of Miliolids and epiphytic species are present. On the contrary, in the sector polluted, from the marinas to the crude oil refinery, foraminiferal density and species diversity are low, and assemblages are dominated, albeit with very low densities, by species that tolerate stressed environmental conditions, such as LOFAs, agglutinants and Ammonia spp. Here, the highest trace elements concentrations of Pb, Zn and Cu and related EFs were detected. Eastwards, in the sector moderately polluted, foraminiferal populations are quite poor. They are characterised by low values of species richness and foraminiferal densities, nevertheless trace element concentrations become lower than in the other sectors and their EFs are often below 1. Deformed foraminifera, with percentages up to 7.14 %, were found in all three of the sectors. Differences in benthic foraminiferal assemblages, coupled with results from statistical analysis, indicate that anthropogenic trace element pollution could be considered as one of the most important causes of the modifications of foraminiferal assemblages in the study area.