Droplet size spectra and deposits of Bacillus thuringiensis aerial sprays,following application at two volume rates over an oak forest

Abstract

Dipel® 8AF, a commercial formulation of Bacillus thuringiensis (B.t.) was sprayed undiluted at 30 BIU in 1.8L/ha over a block B1, and sprayed after dilution with water at 30 BIU in 6.2 L/ha over another block B2 in an oak forest infested with the gypsy moth (Lymantria dispar L.) in southeastern Ontario, Canada. Spray was applied in May 1987 using a Cessna 188 Agtruck aircraft equipped with four Hicronair^® AU4000 atomizers. Droplet sizes were measured at mid‐canopy level of oak trees and at ground level using cylindrical Kromekote® cards. Deposit per unit area was assessed on aluminum oak leaves.

At the lower volume rate of 1.8 L/ha, spray droplets were smaller and droplets/cm² were lower on the cylindrical Kromekote cards in B1 than those obtained in B2 which received the higher volume rate of 6.2 L/ha. The average deposit per unit area of the aluminum oak leaves, expressed in nL of the spray volume per cm² surface area, was also correspondingly lower in B1 than in B2. This was attributed to the higher volume rate of spray application used in B2 than in B1, which resulted in larger droplets and a greater volume deposit/cm² in B2.     

Physicochemical characterization of industrial effluents and their effect on fish survival

Abstract

Water samples taken from selected industrial drainages and receiving streams in and around Islamabad, Pakistan, during the summers of 1987 to 1990 showed disturbances in pH and low oxygen levels. Selected metals (Fe, Pb, Zn, Cd, Cu, Ni, Hg) were higher in all effluents than in receiving waters. Static bioassays of the undiluted industrial effluents from three sites caused 100% mortality in carp during the first 24 hrs. Fishes also suffered 30 to 60% mortality when exposed to other undiluted industrial effluents and some mortality when industrial effluents were diluted by 50%.     

Influence of surfactant concentration on foliar retention of pesticides used in forestry

Abstract

Aqueous tank mixes of permethrin, fenitrothion, Bacillus thuringiensis (B.t.), diflubenzuron (DFB), and glyphosate containing different amounts of Triton® X‐114, a nonionic surfactant, were prepared. Glyphosate formed clear solutions, permethrin and fenitrothion formed emulsions, DFB and B.t provided suspensions. Emulsion stability of permethrin and fenitrothion increased with increasing surfactant level, while the emulsion drop size decreased.

Foliage of white oak, trembling aspen, white spruce and balsam fir were dipped in tank mixes of pesticides (except B.t.) labelled with ¹⁴carbon. The amount of pesticide retained on foliage was determined by liquid scintillation counting. Foliage was also dipped in non‐radioactive B.t. tank mixes, and the protein retained was determined colorimetrically. With all tank mixes, a direct relationship was observed between the mass of liquids retained on foliage and liquid viscosity. In contrast, the amount of pesticide retained was unaffected by viscosity, but was influenced by emulsion drop size. Initially, the amount of pesticide retained on foliage increased with increasing surfactant concentration. Beyond an optimum surfactant level, the emulsion drop sizes were too small and the emulsions became too stable to allow maximum retention of pesticides on foliage. With the glyphosate solutions, however, no optimum surfactant level was indicated because foliar concentrations continued to increase with increasing surfactant levels.     

Use of Membrane Collectors in Electrostatic Precipitators

ABSTRACT

Membrane collection surfaces, developed and patented by researchers at Ohio University, were used to replace steel plates in a dry electrostatic precipitator (ESP). Such replacement facilitates tension-based rapping, which shears the adhered particle layer from the collector surface more effectively than hammer-based rapping. Tests were performed to measure the collection efficiency of the membranes and to quantify the potential improvements of this novel cleaning technique with respect to re-entrainment. Results indicate that even semiconductor materials (e.g., carbon fibers) collect ash nearly as efficiently as steel plates, potentially indicating that collection surface resistivity is primarily dictated by the accumulated ash layer and not by the underlying plate conductivity. In addition, virtually all sheared particles separated from the collecting membranes fell within the boundary layer of the membrane, indicating extremely low potential for re-entrainment.     

Evaluation of fungal potentiality for bioconversion of domestic wastewater sludge

This study was undertaken to screen the filamentous fungi isolated from its relevant habitats (wastewater, sewage sludge and sludge cake) for the bioconversion of domestic wastewater sludge. A total of 35 fungal strains were tested against wastewater sludge (total suspended solids, TSS 1%-5% w/w) to evaluate its potentiality for enhancing the biodegradability and dewaterability using liquid state bioconversion(LSB) process. The strains were divided into five groups i. e. Penicillium, Aspergillus, Trichoderma, Basidiomycete and Miscellaneous, respectively. The strains WWZP1003, SCahmA103, SCahmT105 and PC-9 among their respective groups of Penicillium,Aspergillus, Trichoderma and Basidiomycete played potential roles in terms of separation (formation of pellets/flocs/filaments),biodegradation(removal of COD) and filtration(filterability) of treated domestic wastewater sludge. The Miscellaneous group was not considered due to its unsatisfactory results as compared to the other groups. The pH value was also influenced by the microbial treatment during fermentation process. The filterability of treated sludge was improved by fungal treatment, and lowest filtration time was recorded for the strain WWZP1003 and SCahmA103 of Penicillium and Aspergillus groups respectively compared with other strains.     

Environmental implications of soil remediation using the Fenton process

This work evaluates some collateral effects caused by the application of the Fenton process to 1,1-bis(4-chlorophenyl)-2,2,2-trichloroethane (DDT) and diesel degradation in soil. While about 80% of the diesel and 75% of the DDT present in the soil were degraded in a slurry system, the dissolved organic carbon (DOC) in the slurry filtrate increased from 80 to 880mgl(-1) after 64h of reaction and the DDT concentration increased from 12 to 50microgl(-1). Experiments of diesel degradation conducted on silica evidenced that soluble compounds were also formed during diesel oxidation. Furthermore, significant increase in metal concentrations was also observed in the slurry filtrate after the Fenton treatment when compared to the control experiment leading to excessive concentrations of Cr, Ni, Cu and Mn according to the limits imposed for water. Moreover, 80% of the organic matter naturally present in the soil was degraded and a drastic volatilization of DDT and 2,2-bis(4-chlorophenyl)-1,1-dichloroethylene was observed. Despite the high percentages of diesel and DDT degradation in soil, the potential overall benefits of its application must be evaluated beforehand taking into account the metal and target compounds dissolution and the volatilization of contaminants when the process is applied.     

Estimation and comparison of night-time OH levels in the UK urban atmosphere using two different analysis methods

Night-time OH levels have been determined for UK urban surface environments using two methods,the decay and steady state approximation methods.Measurement data from the UK National Environmental Technology Centre archive for four urban sites(Bristol,Harwell,London Eltham and Edinburgh) over the time period of 1996 to 2000 have been used in this study.Three reactive alkenes,namely isoprene,1,3-butadiene and trans-2-pentene were chosen for the calculation of OH levels by the decay method.Hourly measurements o...     

Kinetic adsorption of application of carbon nanotubes for Pb(Ⅱ) removal from aqueous solution

The capability of carbon nanotubes (CNTs) to adsorb lead (Pb) in aqueous solution was investigated. Batch mode adsorption experiment was conducted to determine the effects of pH, agitation speed, CNTs dosage and contact time. The removal of Pb(Ⅱ) reached maximum value 85% or 83% at pH 5 or 40 mg/L of CNTs, respectively. Higher correlation coeffcients from Langmuir isotherm model indicates the strong adsorptions of Pb(Ⅱ) on the surface of CNTs (adsorption capacity Xm = 102.04 mg/g). The results indicates tha...     

Study on the Physico-mechanical Properties of Photo-cured Chitosan Films with Oligomer and Acrylate Monomer

Chitosan films were prepared from dried prawn shell via chitin and then tensile properties like tensile strength (TS) and elongation at break (Eb) of the films were evaluated. Six formulations were developed using methyl methacylate (MMA) monomer and aliphatic urethane diacrylate oligomer (M-1200) in methanol along with photoinitator (Darocur-1664). Then the films were soaked in the formulations and irradiated under UV radiation at different doses for the improvement of physico-mechanical properties of chitosan films. The cured films were characterized by measuring TS, Eb, polymer loading (PL), water absorption and gel content properties. The formulation containing 43% MMA and 15% oligomer in methanol solution showed the best performance at 20th UV pass for 4 min soaking time.     

The geo-genetic status of earthquake-related hazards and the role of human and policy dimensions in impact mitigation

ABSTRACT

Earthquakes occur in and around active lithospheric-plate margins that are located both in diverging and converging plate-settings. New fault rupture or old active fault reactivation can cause ground shaking, land deformation, land subsidence, landslides, and mass avalanches. The relevant locations of major risk centres around the world are well known. However, the parameters such as trend, pattern, frequency and magnitude are highly variable and very difficult to determine and predict. One result is that many fundamental and universal scientific achievements for mitigating earthquake hazard have often failed in protecting and safe-guarding human life and property. Although naturally occurring events cannot be prevented nevertheless loss of life and property damage could be minimized if an integrated effort and using the wisdom of the relevant professionals are practiced. A paradigm shift of the culture from post-disaster relief and rehabilitation to pre-disaster preparation and practice would reduce the level of destruction from an impending earthquake. Requisite pre-disaster physical planning and appropriate building measures, and pre- and post-disaster risk management should give special attention to public awareness programmes for loss mitigation. However, the fundamental requirement for such achievement is dedicated approach and commitment from the planner, practitioners and end-users of risk mitigation actions.