Estimation and comparison of night-time OH levels in the UK urban atmosphere using two di erent analysis methods

Night-time OH levels have been determined for UK urban surface environments using two methods, the decay and steady state approximation methods. Measurement data from the UK National Environmental Technology Centre archive for four urban sites (Bristol, Harwell, London Eltham and Edinburgh) over the time period of 1996 to 2000 have been used in this study. Three reactive alkenes, namely isoprene, 1,3-butadiene and trans-2-pentene were chosen for the calculation of OH levels by the decay method. Hourly measurements of NO, NO2, O3, CO and 20 VOCs were used to determine night-time OH level using the steady state approximation method. Our results showed that the night-time OH levels were in the range of 1 105–1 106 molecules/cm3 at these four urban sites in the UK. The application of a t-test of these analyses indicated that except Bristol, there was no significant di erence between the OH levels found from the decay and steady state approximation methods. Night-time levels of the OH radical appeared to peak in summer and spring time tracking the night-time O3 levels which also passed through a maximum at this time.     

Wind and wind power characteristics of the eastern and southern coastal and northern inland regions,South Africa

Environmental Science and Pollution Research - The objective of this work is to understand the fluctuating nature of wind speed characteristics on different time scales and to find the long-term...     

Preparation of Magadiite-Sodium Alginate Drug Carrier Composite by Pickering-Emulsion-Templated-Encapsulation Method and Its Properties of Sustained Release Mechanism by Baker–Lonsdale and Korsmeyer–Peppas Model

Journal of Polymers and the Environment - In this study, the nanohybrid drug carrier were synthesized by Pickering emulsion-templated encapsulation (PETE) method to control the...     

Microfibrillated Cellulose-Silver Nanocomposite Based PVA Hydrogels and Their Enhanced Physical,Mechanical and Antibacterial Properties

Journal of Polymers and the Environment - Modification of cellulose with silver nanoparticles produces various nanocomposites with significantly developed properties. This work aims to prepare a...     

Contamination status of arsenic,lead, and cadmium of different wetland waters

The present investigation was conducted to determine the contamination status of arsenic (As), cadmium (Cd), and lead (Pb) in the wetland waters of Bhaluka in Bangladesh. Water samples were collected from 15 selected wetlands of Bhaluka region and analyzed using an atomic absorption spectrophotometer. Estimated results of three metals detected were As (7–80?µg?L^?1), Pb (0–86?µg?L^?1) and Cd (0–70?µg?L^?1) in water samples in all wetlands. The level of As in all investigated wetlands (93%) was higher than that of WHO recommended permissible limit of drinking water except Alanga wetland. However, As levels were higher than that recommended for livestock water quality levels. Eighty-seven percent of the investigated wetlands showed lower content of Pb than WHO recommended permissible limit of drinking water, but two wetland waters (Dohuria-1 and Chowdhuri) were polluted with higher Pb levels. Sixty-seven percent of the investigated wetlands displayed higher levels of Cd than WHO recommended permissible limit in drinking water. Dissolved organic material showed no significant difference among the 15 investigated wetlands water, but total dissolved solids was significantly greater. The condition of the water of all wetlands was basic pH. All water samples were applied to linear regression equation and correlation coefficients where values showed no significant differences. Data demonstrate that the estimated high metal concentrations of these ponds may contribute to bioaccumulation within plants, food grains and shrimp.     

Proteomics study of Southern Punjab Pakistani cobra (Naja naja: formerly Naja naja karachiensis) venom

Because of the potential of significant geographic variation in the compositions of snake venoms, much insight can be gained by examining individuals originating from diverse locations, and detailed characterization of any species can only be done by including animals from the entire range. Pakistani N. naja (formerly N. naja karachiensis) venom was decomplexed by applying diverse techniques and found a concoction of proteins (a total of 43 venomous proteins comprising 11 super families) from 6 to 200 kilodaltons in size. Among them three finger toxins (58%), phosphoplipses A₂ (19%), snake venom metalloproteinases (5%), l-amino acid oxidases (5%), helvepryns (3%), vespryns (2%), cobra venom factor (2%), 5′-nucleotidases (2%), venom nerve growth factor (2%), and Kunitz type serine protease inhibitor (2%) were included. It is the first report that this venom possesses significantly higher percentage of three finger toxins belonging to the cytotoxins (32% overall) and α‐neurotoxins (32% overall, predominately long chain neurotoxins, 24% overall) compared to N. naja from other geographic locations. Better understanding of intraspecific variations in venom can improve the development of location-specific anti-venoms. Furthermore, this pool of diverse toxins could potentially be a source of novel drug candidates for the treatment of muscarinic acetylcholine receptors mediated nervous disorders.     

Physiological and biochemical mechanisms of spermine-induced cadmium stress tolerance in mung bean (<Emphasis Type="Italic">Vigna radiata</Emphasis> L.) seedlings

The role of exogenous spermine (0.25 mM Spm, a type of polyamine (PA) in reducing Cd uptake and alleviating Cd toxicity (containing 1 and 1.5 mM CdCl₂ in the growing media) effects was studied in the mung bean (Vigna radiata L. cv. BARI Mung-2) plant. Exogenously applied Spm reduced Cd content, accumulation, and translocation in different plant parts. Increasing phytochelatin content, exogenous Spm reduced Cd accumulation and translocation. Spm application reduced the Cd-induced oxidative damage which was reflected from the reduction of H₂O₂ content, O₂ ^?– generation rate, lipoxygenase (LOX) activity, and lipid peroxidation level and also reflected from the reduction of spots of H₂O₂ and O₂ ^?– from mung bean leaves (compared to control treatment). Spm pretreatment increased non-enzymatic antioxidant contents (ascorbate, AsA, and glutathione, GSH) and activities of antioxidant enzymes such as superoxide dismutase (SOD), catalase (CAT), glutathione S-transferase (GST), monodehydroascorbate reductase (MDHAR), dehydroascorbate reductase (DHAR), and glutathione reductase (GR) which reduced oxidative stress. The cytotoxicity of methylglyoxal (MG) is also reduced by exogenous Spm because it enhanced glyoxalase system enzymes and components. Through osmoregulation, Spm maintained a better water status of Cd-affected mung bean seedlings. Spm prevented the chl damage and increased its content. Exogenous Spm also modulated the endogenous free PAs level which might have the roles in improving physiological processes including antioxidant capacity, osmoregulation, and Cd and MG detoxification capacity. The overall Spm-induced tolerance of mung bean seedlings to Cd toxicity was reflected through improved growth of mung bean seedlings.     

Novel hybrid composite discharge electrode for electrostatic precipitator

Over the last few decades, electrostatic precipitators (ESPs) have emerged as effective air pollution control devices for treating coal-fired power plant exhausts. Among the components of the ESP, the discharge electrodes are extremely important in determining the collection efficiency of the ESP. Typically, in wet ESPs, the discharge electrodes used must be made of corrosion-resistant alloys, which makes them extremely expensive and heavy. Hybrid composite discharge electrodes have the potential to be lightweight and corrosion-resistant substitute for traditional metal alloy electrodes used in wet ESPs. In this experimental study, a novel hybrid composite electrode (recently patented at Ohio University) is presented as a substitute for traditional metal electrodes in wet ESPs. The samples of hybrid electrodes were fabricated by using carbon fiber composites, combined with metal mesh, in the shape of a long and thin tape. The electrode’s electrical response was evaluated in open atmospheric conditions, while connected to a transformer-rectifier unit to generate a corona current at voltages exceeding 50 kV. Results of these hybrid electrodes were compared with traditional metal electrodes. The hybrid composite discharge electrode produced a uniform corona at comparable power levels to that of metal electrodes, with additional advantages of being compact, lightweight, and highly corrosion resistant. In addition, hybrid composite electrodes exhibited lower corona onset voltage as compared with metal electrodes. The preliminary experimental data are encouraging and show significant potential for this new inexpensive hybrid electrode to replace metal electrodes in wet ESPs, providing comparable (and in some cases exceeding) collection efficiencies with lower ozone generation.

Implications: The newly invented hybrid composite electrode (HCE) performance was evaluated through experimentation with conventional metal electrodes. The HCE performance was comparable to the metal electrodes. The HCE also exhibited uniform corona fields and steady power while maintaining similar and in some cases superior electrical performance as compared with metal electrodes and thus shows a significant potential to substitute metal electrodes in wet ESP systems.     

Kinetic adsorption of application of carbon nanotubes for Pb（II） removal from aqueous solution

The capability of carbon nanotubes (CNTs) to adsorb lead (Pb) in aqueous solution was investigated. Batch mode adsorption experiment was conducted to determine the effects of pH, agitation speed, CNTs dosage and contact time. The removal of Pb(II) was reach to maximum value 85% or 83% at pH 5 or 40 mg/L of CNTs, respectively. Higher correlation coefficients from Langmuir isotherm model indicates the strong adsorptions of Pb(II) on the surface of CNTs (adsorption capacity Xm = 102.04 mg/g). From this study, the results indicates that the highest percentage removal of Pb (96.03%) can be achieved at pH 5, 40 mg/L of CNTs, contact time 80 min, and agitation speed 50 r/min.