Leaching mechanisms of Cr(VI) from chromite ore processing residue

Batch leaching tests, qualitative and quantitative x-ray powder diffraction (XRPD) analyses, and geochemical modeling were used to investigate the leaching mechanisms of Cr(VI) from chromite ore processing residue (COPR) samples obtained from an urban area in Hudson County, New Jersey. The pH of the leaching solutions was adjusted to cover a wide range between 1 and 12.5. The concentration levels for total chromium (Cr) and Cr(VI) in the leaching solutions were virtually identical for pH values >5. For pH values <5, the concentration of total Cr exceeded that of Cr(VI) with the difference between the two attributed to Cr(III). Geochemical modeling results indicated that the solubility of Cr(VI) is controlled by Cr(VI)-hydrocalumite and Cr(VI)-ettringite at pH >10.5 and by adsorption at pH <8. However, experimental results suggested that Cr(VI) solubility is controlled partially by Cr(VI)-hydrocalumite at pH >10.5 and by hydrotalcites at pH >8 in addition to adsorption of anionic chromate species onto inherently present metal oxides and hydroxides at pH <8. As pH decreased to <10, most of the Cr(VI) bearing minerals become unstable and their dissolution contributes to the increase in Cr(VI) concentration in the leachate solution. At low pH ( <1.5), Cr(III) solid phases and the oxides responsible for Cr(VI) adsorption dissolve and release Cr(III) and Cr(VI) into solution.     

Heavy metal immobilization in soil near abandoned mines using eggshell waste and rapeseed residue

Heavy metal contamination of agricultural soils has received great concern due to potential risk to human health. Cadmium and Pb are largely released from abandoned or closed mines in Korea, resulting in soil contamination. The objective of this study was to evaluate the effects of eggshell waste in combination with the conventional nitrogen, phosphorous, and potassium fertilizer (also known as NPK fertilizer) or the rapeseed residue on immobilization of Cd and Pb in the rice paddy soil. Cadmium and Pb extractabilities were tested using two methods of (1) the toxicity characteristics leaching procedure (TCLP) and (2) the 0.1 M HCl extraction. With 5 % eggshell addition, the values of soil pH were increased from 6.33 and 6.51 to 8.15 and 8.04 in combination with NPK fertilizer and rapeseed residue, respectively, compared to no eggshell addition. The increase in soil pH may contribute to heavy metal immobilization by altering heavy metals into more stable in soils. Concentrations of TCLP-extracted Cd and Pb were reduced by up to 67.9 and 93.2 % by addition of 5 % eggshell compared to control. For 0.1 M HCl extraction method, the concentration of 0.1 M HCl-Cd in soils treated with NPK fertilizer and rapeseed residue was significantly reduced by up to 34.01 and 46.1 %, respectively, with 5 % eggshell addition compared to control. A decrease in acid phosphatase activity and an increase in alkaline phosphatase activity at high soil pH were also observed. Combined application of eggshell waste and rapeseed residue can be cost-effective and beneficial way to remediate the soil contaminated with heavy metals.     

Glutathione, glutathione S-transferase, and glutathione conjugates, complementary markers of oxidative stress in aquatic biota

Contaminants are ubiquitous in the environment and their impacts are of increasing concern due to human population expansion and the generation of deleterious effects in aquatic species. Oxidative stress can result from the presence of persistent organic pollutants, metals, pesticides, toxins, pharmaceuticals, and nanomaterials, as well as changes in temperature or oxygen in water, the examined species, with differences in age, sex, or reproductive cycle of an individual. The antioxidant role of glutathione (GSH), accompanied by the formation of its disulfide dimer, GSSG, and metabolites in response to chemical stress, are highlighted in this review along with, to some extent, that of glutathione S-transferase (GST). The available literature concerning the use and analysis of these markers will be discussed, focusing on studies of aquatic organisms. The inclusion of GST within the suite of biomarkers used to assess the effects of xenobiotics is recommended to complement that of lipid peroxidation and mixed function oxygenation. Combining the analysis of GSH, GSSG, and conjugates would be beneficial in pinpointing the role of contaminants within the plethora of causes that could lead to the toxic effects of reactive oxygen species.     

Physicochemical and mineralogical characterization of soil-saprolite cores from a field research site, Tennessee

Site characterization is an essential initial step in determining the feasibility of remedial alternatives at hazardous waste sites. Physicochemical and mineralogical characterization of U-contaminated soils in deeply weathered saprolite at Area 2 of the DOE Field Research Center (FRC) site, Oak Ridge, TN, was accomplished to examine the feasibility of bioremediation. Concentrations of U in soil-saprolite (up to 291 mg kg(-1) in oxalate-extractable U(o)) were closely related to low pH (ca. 4-5), high effective cation exchange capacity without Ca (64.7-83.2 cmol(c) kg(-1)), amorphous Mn content (up to 9910 mg kg(-1)), and the decreased presence of relative clay mineral contents in the bulk samples (i.e., illite 2.5-12 wt. %, average 32 wt. %). The pH of the fill material ranged from 7.0 to 10.5, whereas the pH of the saprolite ranged from 4.5 to 8. Uranium concentration was highest (about 300 mg kg(-1)) at around 6 m below land surface near the saprolite-fill interface. The pH of ground water at Area 2 tended to be between 6 and 7 with U concentrations of about 0.9 to 1.7 mg L(-1). These site specific characteristics of Area 2, which has lower U and nitrate contamination levels and more neutral ground water pH compared with FRC Areas 1 and 3 (ca. 5.5 and <4, respectively), indicate that with appropriate addition of electron donors and nutrients bioremediation of U by metal reducing microorganisms may be possible.     

Levels and regional trends of persistent organochlorines and polybrominated diphenyl ethers in Asian breast milk demonstrate POPs signatures unique to individual countries

Human breast milk samples collected in 2007–2008 from four countries, Vietnam (Hanoi), China (Beijing), Korea (Seoul) and Japan (Sendai, Kyoto and Takayama), were analyzed for persistent organic pollutants (POPs) such as dichlorodiphenyltrichloroethane and its metabolites (DDTs), chlordane-related compounds (CHLs), hexachlorocyclohexanes (HCHs), hexachlorobenzene (HCB), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs). Comparing with previous surveys, the present study indicates that the DDTs in breast milk from China and Vietnam had gradually decreased during the last decade, but were still 5–10 times higher than those in other nations. The ratios of p,p′-DDE/p,p′-DDT and o,p′-DDT/p,p′-DDT were higher in Beijing than in the other countries, suggesting that there is less fresh intake of commercial DDT products and a possible exposure to dicofol in China. CHL and PCB levels were relatively higher in mothers from Japan, whereas β-HCH and HCB were more common in Chinese women. In Japan, it is suspected that mothers in the urban/coastal area (Sendai) were more continuously exposed to organochlorine pesticides (OCPs) than mothers in the rural/inland area (Takayama). In addition, OCP levels in primiparae were significantly higher than those in multiparae from Japan and Korea. These indicate that both parity and regional factors are major determinants of the levels of OCPs and PCBs in human milk. On the other hand, higher concentrations of PBDEs were observed in mothers' milk from Korea. The congener was dominated by BDE-47 (43–54%), followed by BDE-153 (23–33%) in all regions except for Beijing where BDE-28 (23%) was relatively abundant. In Japanese breast milk, regional and parity-dependent distributions were not observed for PBDEs. Among PBDE congeners, age-dependency was observed for BDE-153, which was negatively correlated (p < 0.05) to the age of mothers in Kyoto (17 participants were housewives), while it increased with age in Sendai (10 participants were clerks). No such correlation was seen for BDE-47, indicating that BDE-47 was ingested and assimilated via different kinetics or routes from BDE-153 in Japan.     

Estimation of the recycled content of an existing construction project

The Government's Sustainable Buildings Task Group recently recommended a benchmark requirement for a minimum 10% of reused/reclaimed or recycled content (by material value) in construction projects. The benchmark would be implemented through Building Regulations and public sector procurement. This paper presents the findings of a pilot study to inform decision-making on the feasibility of setting and meeting such a requirement.The project involved determining current levels of recycled content in Defence Estates’ standard design for modern barracks accommodation, and quantifying the scope to increase this content. The existing designs for the new barracks were found to use nearly 20% recycled and recovered materials. The project identified opportunities to increase this proportion to nearly 25% with no increase in cost or risk.     

Modification of mutagenic activity of benzo[a]pyrene by trace elements in the Ames assay

Benzo[a]pyrene (BaP) is one of the most ubiquitous environmental contaminants and exerts potent carcinogenicity and mutagenicity. In the presence of rat liver S9 mix, four trace elements, germanium (Ge), iron (Fe), zinc (Zn), and molybdenium (Mo), were included in the Ames Salmonella microsome/mutagenic assay to test their inhibitory effects on BaP-induced mutations. All trace elements were found to exert an inhibitory effect in tester TA98 and TA100 strains; Fe was the most potent among the elements tested, whereas Zn was weakly inhibitory to prevent mutations. The present findings demonstrate that the antimutagenic potential of trace elements, notably Fe, may be attributed to its modulatory effect on the bioactivation and detoxification processes of BaP.     

Environmental indicators for communication of life cycle impact assessment results and their applications

Life cycle impact assessment (LCIA) is performed to quantitatively evaluate all environmental impacts from products, systems, processes and services. However, LCIA does not always provide valuable information for choosing among alternatives with different specifications, functionalities and lifetimes. The objectives of this study are (1) to propose environmental indicators to evaluate environmental efficiency and value qualitatively and quantitatively on the basis of analogies to financial and economic indicators, and (2) to present the application of the indicators. Incremental evaluation using a reference is employed to obtain the environmental indicators. The environmental efficiency indicators are conceptually based on the ratios of reduced environmental burdens returned to environmental burdens required: environmental return on investment, environmental payback period and environmental internal rate of return. The environmental value indicator is the sum of all reduced and required environmental burdens: i.e., environmental net present value. All the environmental indicators can be used to compare and rank the environmental efficiencies or values of alternatives. The environmental efficiency indicators can be applied to a new environmental labeling. The concept of eco-efficiency labeling is developed by combining the environmental efficiency indicators with financial indicators. A case study is performed to illustrate the necessity and importance of the environmental indicators. These environmental indicators can help easily communicate LCIA results in the field of environmental management.     

Identification of process operating state with operational map in municipal wastewater treatment plant

This work was performed to develop an operational map for the objective diagnosis of the process operating states of a municipal wastewater treatment plant, for which multivariate statistical analysis techniques were applied. PCA (principal component analysis) was used to reduce the dimension of the data sets obtained from the field municipal wastewater treatment plant. A K-means clustering analysis was used to classify the group according to the property of the process operating state. A Fisher's linear discriminant analysis was used to derive the discriminant function of each classified group. An operational map was developed by scatter-plotting the derived principal components (PCs) on a two-dimensional coordinate according to the classified groups. Using the new data sets not used for developing the operational map, the practical usefulness of the operational map and discriminant function in diagnosing the process operating state were evaluated. Hence, the process operating state could be easily and quickly diagnosed and the dynamic trend of the process operating state was also able to be estimated using the operational map.