A study on hexachromic ion selective electrode based on supported liquid membranes

An ion selective electrode (ISE) for determining Cr(VI) using supported liquid membranes (SLMs) containing trioctylphosphine oxide (TOPO) was investigated in this study. TOPO, as a carrier, had a high selectivity for Cr(VI) against interfering ions such as sulfate, nitrate, nitrite, and chloride. The composition of the SLM was optimized as 0.193 g TOPO/1 mL NPOE (o-nitrophenyl octyl ether)/0.5 g poly (vinyl chloride) for detection of Cr(VI). The Cr(VI) concentration was measured in the range of1 × 10^-3 to 1 × 10^-6 M with the SLM prepared in the study. It seemed that Cr(VI) was transported in the SLM as a triply charged ion indicated by the slope of the emf response. Selectivity coefficients and detection limits of Cr(VI) in the presence of interfering ions were determined experimentally using the fixed interference method.     

Estimation of methane emission potential using the Clean Development Mechanism (CDM) tool for municipal solid waste landfill in Mandalay,Myanmar

Journal of Material Cycles and Waste Management - Municipal solid waste (MSW) landfills are the third largest source of global methane emissions as biogas (11%). In developing countries, MSW...     

Wilderness forms and their implications for global environmental policy and conservation

With the intention of securing industry-free land and seascapes, protecting wilderness entered international policy as a formal target for the first time in the zero draft of the Post-2020 Global Biodiversity Framework under the Convention on Biological Diversity. Given this increased prominence in international policy, it is timely to consider the extent to which the construct of wilderness supports global conservation objectives. We evaluated the construct by overlaying recently updated cumulative human pressure maps that offer a global-scale delineation of industry-free land as wilderness with maps of carbon stock, species richness, and ground travel time from urban centers. Wilderness areas took variable forms in relation to carbon stock, species richness, and proximity to urban centers, where 10% of wilderness areas represented high carbon and species richness, 20% low carbon and species richness, and 3% high levels of remoteness (>48 h), carbon, and species richness. Approximately 35% of all remaining wilderness in 2013 was accessible in <24 h of travel time from urban centers. Although the construct of wilderness can be used to secure benefits in specific contexts, its application in conservation must account for contextual and social implications. The diverse characterization of wilderness under a global environmental conservation lens shows that a nuanced framing and application of the construct is needed to improve understanding, communication, and retention of its variable forms as industry-free places.     

Environmental and economic feasibility study of a total wastewater treatment network system

The synthesis of distributed wastewater treatment plants (WTPs) has been studied to reduce capital and operating costs associated with wastewater treatment. In this study, the environmental and economic feasibility of a total wastewater treatment network system (TWTNS) including distributed and terminal WTPs was estimated using life cycle assessment (LCA) and life cycle costing (LCC) methods. Wastewater sources and existing distributed and terminal WTPs in an iron and steel plant were networked. The TWTNS was generated from the optimal solution to a mathematical optimization model and compared to a conventional wastewater treatment system (CWTS). The environmental effect scores of the TWTNS were from 29.6% to 68.3% higher than those of the CWTS because of higher electricity consumption required to pump wastewater to the networked WTPs. However, the life cycle cost of the TWTNS was lower than that of the CWTS by 10.1% because of the decrease of the labor cost resulting from the closing of three distributed WTPs. Overall, the TWTNS was no more eco-efficient than the CWTS because the increase of environmental burdens outweighed the decrease of economic costs.     

Temperature and salinity adaptation in the purple shore crab Hemigrapsus nudus: An in vitro physiological study with excised gills

The alkali-soluble polysaccharides of the cell wall from 7 different marine diatoms were shown to contain the monosaccharides rhamnose, fucose, galactose, mannose and xylose. The relative amounts of rhamnose and fucose varied widely from one species to another, from the very rhamnose-rich Chaetoceros affinis to Thalassiosira gravida, where no rhamnose was found. All Chaetoceros species were found to have a high content of rhamnose. Also the proportion of mannose to galactose varied widely from species to species. The observed change in monomer composition from the logarithmic to the stationary growth phase is explained by assuming the alkali-soluble fraction to be a mixture of polysaccharides. The soluble, extracellular polysaccharides from 4 of the diatoms were also investigated. The products from C. affinis and C. curvisetus were homogeneous and composed of only 3 monomers: rhamnose, fucose and galactose. The extracellular polysaccharide composition in all species investigated was quite different from the composition of the cellular alkali-soluble fraction. The ecological aspects of these soluble polysaccharides may prove of considerable interest.     

Recovery of uranium phosphate by a stepwise thermal treatment of uranium-bearing spent TBP

A stepwise thermal treatment process for the recovery of uranium phosphate from uranium-dissolved spent TBP was demonstrated. The pathway of the reactions involved in the thermal decomposition and oxidation processes of uranium-bearing spent TBP was established based on the results of thermogravimetric analyses. Relatively low-temperature pyrolysis is required to avoid the condensation of corrosive phosphoric acid via vaporization. Low-temperature pyrolysis residue was analyzed and found to be composed of pyrocarbon, phosphorus oxide (P₂O₅) and two types of uranium phosphate (UP₂O₇ and UP₄O₁₂). Uranium pyrophosphate (UP₂O₇) was recovered from the burning out of pyrocarbon in the pyrolysis residue after the dissolution removal of phosphorus oxide in water. A substantial recovery of uranium by the proposed stepwise thermal treatment method was successfully demonstrated by a treatment of pyrolysis residue from a bench-scale low-temperature pyrolysis process.     

A simultaneous optimization approach for the design of wastewater and heat exchange networks based on cost estimation

A new systematic methodology for designing wastewater and heat exchange networks for process industries involving effluent streams containing multiple contaminants is proposed. A simultaneous optimization approach mathematically combines the problems of wastewater and heat exchanger network optimization into a single step. This process includes two global iterations of a similar two-stage approach and optimizes networks for water and heat exchange simultaneously based on cost estimation. The objective function is to minimize the total annual cost of the wastewater and heat exchange network design which is subject to the mass and energy balance constraints on all the pertinent flows and to constraints related to the concentrations of contaminants. The proposed method employs a strategy to address a mixed integer non-linear programming (MINLP) formulation. Cost estimates for optimized wastewater and heat exchange networks for an oil refinery process are generated, illustrating the effectiveness of the proposed methodology.     

Stabilization of Cu-contaminated army firing range soils using waste oyster shells

A stabilization/solidification (S/S) process was used to immobilize Cu in contaminated soils obtained from two army firing ranges sites (A and B) with total Cu concentrations of 520 and 380 mg/kg, respectively. Both waste oyster shells (WOS) and pretreated oyster shells (POS) were used to immobilize Cu in the contaminated soils. Waste oyster shells passing the #10 mesh and #20 mesh were used for the Sites A and B, respectively. WOS- and POS-treated soil samples cured for 28 days were evaluated for Cu leaching by the Korean Standard Leaching Test (KSLT) method. Slurry suspensions were prepared to investigate the Cu immobilization mechanism using X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) energy dispersive X-ray spectroscopy (EDX) analyses. The treatment results showed that the POS treatment was more effective than the WOS treatment of 28 days. For Site A, 10 wt% WOS and 3 wt% POS dosages were required to pass the Korean warning standard of 50 mg/kg, while 10 wt% WOS and 5 wt% POS dosages were required for the Site B treatment. The XRPD and SEM-EDX results showed that Cu immobilization was strongly linked to both CSH/CAH and ettringite. Overall, the POS treatment was effective at immobilizing the Cu in the contaminated soils, very likely due to its CaO content.     

Leaching mechanisms of Cr(VI) from chromite ore processing residue

Batch leaching tests, qualitative and quantitative x-ray powder diffraction (XRPD) analyses, and geochemical modeling were used to investigate the leaching mechanisms of Cr(VI) from chromite ore processing residue (COPR) samples obtained from an urban area in Hudson County, New Jersey. The pH of the leaching solutions was adjusted to cover a wide range between 1 and 12.5. The concentration levels for total chromium (Cr) and Cr(VI) in the leaching solutions were virtually identical for pH values >5. For pH values <5, the concentration of total Cr exceeded that of Cr(VI) with the difference between the two attributed to Cr(III). Geochemical modeling results indicated that the solubility of Cr(VI) is controlled by Cr(VI)-hydrocalumite and Cr(VI)-ettringite at pH >10.5 and by adsorption at pH <8. However, experimental results suggested that Cr(VI) solubility is controlled partially by Cr(VI)-hydrocalumite at pH >10.5 and by hydrotalcites at pH >8 in addition to adsorption of anionic chromate species onto inherently present metal oxides and hydroxides at pH <8. As pH decreased to <10, most of the Cr(VI) bearing minerals become unstable and their dissolution contributes to the increase in Cr(VI) concentration in the leachate solution. At low pH ( <1.5), Cr(III) solid phases and the oxides responsible for Cr(VI) adsorption dissolve and release Cr(III) and Cr(VI) into solution.