Occurrence and ecotoxicological risk assessment of pesticides in sediments of the Rosetta branch, Nile River, Egypt

This study aimed to (1) monitor the occurrence and spatiotemporal variations of 100 pesticides in sediments collected monthly from July 2018 to June 2019 from sampling sites in El-Rahawy, Sabal, and Tala, along the Rosetta branch of the Nile River, Egypt, and (2) perform an ecological risk assessment for aquatic organisms upon exposure to the detected sediment pesticides based on the risk quotient (RQ) method. Out of the 100 pesticides monitored, 16 pesticides belonging to seven chemical families were detected, and 55% of the sediment samples were contaminated with one or more pesticide residues. The mean concentration (mg/kg dry weight (dw)) and detection frequency (%) of the four most frequently detected pesticides in the sediment samples were as follows: chlorpyrifos (0.18 mg/kg dw and 34%), p,p′-DDE (0.018 mg/kg dw and 30%), cypermethrin (0.03 mg/kg dw and 14%), and deltamethrin (0.026 mg/kg dw and 13%). The spatial distribution exhibited that El-Rahawy had the highest pesticide load (2.86 mg/kg dw) among the studied sites, whereas the temporal variations revealed that the highest total pesticide concentrations were detected in winter season (1.73 mg/kg dw). Meanwhile, 12 pesticides showed high RQs (>1), posing a potential ecological risk to aquatic species that live and feed on such sediments.     

Molecular and serological study on congenital toxoplasmosis in newborn of Shiraz,Southern Iran

Environmental Science and Pollution Research - Toxoplasmosis is a zoonotic disease caused by an obligatory intracellular parasite, Toxoplasma gondii. The congenital form of the disease is a...     

Assessment of actinobacteria use in the elimination of multidrug-resistant bacteria of Ibn Tofail hospital wastewater (Marrakesh,Morocco): a chemometric data analysis approach

Environmental Science and Pollution Research - The efficiency of the treatment of hospital wastewater by actinobacteria was investigated using two chemometric data analysis methods. Six strains of...     

Monitoring of linear alkyl benzenes (LABs) in riverine and estuarine sediments in Malaysia

Environmental Geochemistry and Health - The aim of this a pioneering research is to investigate linear alkylbenzenes (LABs) as biomarkers of sewage pollution in sediments collected from four rivers...     

Chemistry,abundance, detection and treatment of per- and polyfluoroalkyl substances in water: a review

Per- and polyfluoroalkyl substances (PFAS) encompass a wide range of compounds containing carbon–fluorine bonds. Due the strength of this bond and the high electronegativity of fluorine atoms, PFAS display stability, wettability and other characteristics that are unique for industrial applications and products. However, PFAS induce adverse effects on the environment and human health. Here we review the chemistry, synthesis, properties, analysis, occurrence in water, filtration, removal and oxydation of PFAS.  We highlight emerging hybrid treatments to remove PFAS from water.

     

Development of a waste management protocol based on assessment of knowledge and practice of healthcare personnel in surgical departments

Background:Good healthcare waste management in a hospital depends on a dedicated waste management team, good administration, careful planning, sound organization, underpinning legislation, adequate financing, and full participation by trained staff. Hence, waste management protocols must be convenient and sensible.Aim of study:To assess the knowledge and practice related to waste management among doctors, nurses, and housekeepers in the surgical departments at Al-Mansoura University Hospital, and to design and validate a waste management protocol for the health team in these settings.Subjects and methods:This cross-sectional study was carried out in the eight surgical departments at Al-Mansoura University Hospital. All health care personnel and their assistants were included: 38 doctors, 106 nurses, and 56 housekeepers. Two groups of jury were included for experts’ opinions validation of the developed protocol, one from academia (30 members) and the other from service providers (30 members). Data were collected using a self-administered knowledge questionnaire for nurses and doctors, and an interview questionnaire for housekeepers. Observation checklists were used for assessment of performance. The researchers developed the first draft of the waste management protocol according to the results of the analysis of the data collected in the assessment phase. Then, the protocol was presented to the jury group for validation, and then was implemented.Results:Only 27.4% of the nurses, 32.1% of the housekeepers, and 36.8% of the doctors had satisfactory knowledge. Concerning practice, 18.9% of the nurses, 7.1% of the housekeepers, and none of the doctors had adequate practice. Nurses’ knowledge score had a statistically significant weak positive correlation with the attendance of training courses (r = 0.23, p < 0.05). Validation of the developed protocol was done, and the percent of agreement ranged between 60.0% and 96.7% for the service group, and 60.0% and 90.0% for the academia group.Conclusion and recommendations:The majority of the doctors, nurses, and housekeepers have unsatisfactory knowledge and inadequate practice related to health care waste management. The knowledge among nurses is positively affected by attendance of training programs. Based on the findings, a protocol for healthcare waste management was developed and validated. It is recommended to implement the developed waste management protocol for the surgical departments in the designed hospital, with establishment of waste management audits.     

Adsorption properties of kaolinite-based nanocomposites for Fe and Mn pollutants from aqueous solutions and raw ground water: kinetics and equilibrium studies

Raw kaolinite was used in the synthesis of metakaolinite/carbon nanotubes (K/CNTs) and kaolinite/starch (K/starch) nanocomposites. Raw kaolinite and the synthetic composites were characterized using XRD, SEM, and TEM techniques. The synthetic composites were used as adsorbents for Fe and Mn ions from aqueous solutions and natural underground water. The adsorption by the both composites is highly pH dependent and achieves high efficiency within the neutral pH range. The experimental adsorption data for the uptake of Fe and Mn ions by K/CNTs were found to be well represented by the pseudo-second-order kinetic model rather than the intra-particle diffusion model or Elovich model. For the adsorption using K/starch, the uptake results of Fe ions was well fitted by the second-order model, whereas the uptake of Mn ions fitted well to the Elovich model rather than pseudo-second-order and intra-particle diffusion models The equilibrium studies revealed the excellent fitting of the removal of Fe and Mn ions by K/CNTs and Fe using K/starch with the Langmuir isotherm model rather than with Freundlich and Temkin models. But the adsorption of Mn ions by K/starch is well fitted with Freundlich rather than Temkin and Langmuir isotherm models. The thermodynamic studies reflected the endothermic nature and the exothermic nature for the adsorption by K/CNTs and K/starch nanocomposites, respectively. Natural ground water contaminated by 0.4 mg/L Fe and 0.5 mg/L Mn was treated at the optimum conditions of pH 6 and 120 min contact time. Under these conditions, 92.5 and 72.5% Fe removal efficiencies were achieved using 20 mg of K/CNTs and K/starch nanocomposites, respectively. Also, K/CNTs nanocomposite shows higher efficiency in the removal of Mn ions as compared to K/starch nanocomposite.     

Photochemical generation of reactive intermediates from urban-waste bio-organic substances under UV and solar irradiation

Singlet oxygen (¹O₂), hydroxyl radicals (^•OH), and excited triplet states of organic matter (³OM^*) play a key role in the degradation of pollutants in aquatic environments. The formation rates and quantum yields (Φ) of these reactive intermediates (RI) through photosensitized reactions of dissolved organic matter (DOM) have been reported in the literature for decades. Urban biowaste-derived substances (UW-BOS), a form of organic matter derived from vegetative and urban waste, have recently been shown to be efficient sensitizers in the photo-degradation of different contaminants. Nevertheless, no quantitative measurements of photo-oxidant generation by UW-BOS have been reported. In this study, the formation quantum yields of ¹O₂ and ^•OH, as well as quantum yield coefficients of TMP degradation (indicative of ³OM^* formation), were quantified for two UW-BOS samples, under 254-nm UV radiation or simulated sunlight and compared to a DOM standard from the Suwanee River (SRNOM). Values of Φ for UW-BOS samples ranged from Φ(+¹O₂) = 8.0 to 8.8 × 10⁻³, Φ(+^•OH) = 4.1 to 4.3 × 10⁻⁶, and f _TMP = 1.22 to 1.23 × 10² L Einstein⁻¹ under simulated sunlight and from Φ(+¹O₂) = 1.4 to 2.3 × 10⁻², Φ(+^•OH) = 1.3 to 3.5 × 10⁻³, and f _TMP = 3.3 to 3.9 × 10² L Einstein⁻¹ under UV. Although UW-BOS are not necessarily better than natural DOM regarding photosensitizing properties, they do sensitize the production of RI and could potentially be used in engineered treatment systems.

     

Applying the three R’s: Reduce,reuse, and recycle in the chemical industry

Pollution prevention (P2) assessment was conducted by applying the three R’s, reduce, reuse, and recycle, in a chemical industry for the purpose of reducing the amount of wastewater generated, reusing paint wastewater in the manufacture of cement bricks, recycling cooling water, and improving water usage efficiency. The results of this study showed that the annual wastewater flow generated from the paint manufacturing can be reduced from 1,100 m³ to 488.4 m³ (44.4% reduction) when a high-pressure hose is used. Two mixtures were prepared. The first mixture (A) contains cement, coarse aggregate, fine aggregate, Addicrete BVF, and clean water. The second mixture (B) contains the same components used in the first mixture, except that paint wastewater was used instead of the clean water. The prepared samples were tested for water absorption, toxicity, reactivity, compressive strength, ignitability, and corrosion. The tests results indicated that using paint wastewater in the manufacture of the cement bricks improved the mechanical properties of the bricks. The toxicity test results showed that the metals concentration in the bricks did not exceed the U.S. EPA limits. This company achieved the goal of zero liquid discharge (ZLD), especially after recycling 2,800 m³ of cooling water. The total annual saving could reach $42,570 with a payback period of 41 days.

Implications: This research focused on improving the water usage efficiency, reducing the quantity of wastewater generated, and potentially reusing wastewater in the manufacture of cement bricks. Reusing paint wastewater in the manufacture of the bricks prevents the hazardous pollutants in the wastewater (calcium carbonate, styrene acrylic resins, colored pigments, and titanium dioxide) from entering and polluting the surface water and the environment. We think that this paper will help to find the most efficient and cost-effective way to manage paint wastewater and conserve fresh water resources. We also believe that this paper provides a rich agenda for future research in water conservation and industrial wastewater reuse subjects.