A comprehensive systematic review of photocatalytic degradation of pesticides using nano TiO2

Environmental Science and Pollution Research - This study has systematically reviewed all of the research articles about the photocatalytic degradation of pesticides using titanium dioxide (TiO2)...     

Rapid photodegradation and detection of zolpidem over β-SnWO4 and α-SnWO4 nanoparticles: optimization and mechanism

Environmental Science and Pollution Research - We reported the tin (II) tungstate nanoparticles as the photocatalyst and sensor modifier that were synthesized via chemical precipitation reaction...     

Mass-transfer processes of chromium(VI) adsorption onto guava seeds

The chromium(VI) biosorption onto guava seeds, as an alternative method for Cr⁶⁺ removal from aqueous solutions, was investigated. The parameters affecting kinetics and equilibrium of Cr⁶⁺ adsorption onto guava seeds were studied. An external mass-transfer diffusion coefficient k and intra-particle diffusion coefficient k_i were determined to measure the rate-limiting step of adsorption. A single external mass-transfer diffusion model and intra-particle diffusion models were used. The effects of initial pH, sorbent mass, and initial Cr⁶⁺ concentrations on mass-transfer coefficients were investigated. The external mass-transfer coefficient has an average value of 7.2×10^-3 cm s^-1, while the intra-particle mass-transfer diffusion coefficient was 0.34 mg g^-1 min^-0.5. This indicates that external diffusion to the guava seeds surface and intra-particle diffusion are both involved in the sorption process. The isotherm equilibrium data were well fitted by the Langmuir and Freundlich models with an average correlation coefficient R²=0.98. The maximum removal of Cr⁶⁺ was obtained at pH 1 (about 100% for adsorbent dose of 15 g l^-1 and 25 mg l^-1 initial concentration of Cr⁶⁺). The results indicated that the guava seeds exhibit acceptable sorption capacity.     

Removal of toxic chromium(VI) from aqueous solution by activated carbon using Casuarina equisetifolia

Highly activated carbon from the seed husk of Casuarina Casuarinas equisetifolia, a worldwide famous plant, have been prepared and tested for the removal of toxic Cr(VI) from its aqueous solution. The adsorbent was investigated for influences of initial chromium concentration (75, 100, 125, and 150 mg l^-1), pH, contact time, and quantity of carbon on removal of Cr(VI) from aqueous solution at room temperature (25±2 °C). The adsorption kinetic of Cr(VI) was studied, and the rates of sorption were found to conform to pseudo-second-order kinetics with a good correlation (R²≥0.99). The Langmuir and Freundlich models fit the isotherm data well. Furthermore, the Gibbs free energy was obtained for each system and was found to be-5.29 kJ mol^-1 for removal of Cr(IV). The negative value of Δ G° indicates the feasibility and spontaneous nature of adsorption. The results indicate that acidic pH (1.05) supported the adsorption of Cr(IV) on activated carbon. The maximum adsorption capacity of Cr(VI) on activated carbon was about 172.4 mg g^-1 at pH 1.05.     

Cadmium bioaccumulation in three benthic fish species, Salaria basilisca, Zosterisessor ophiocephalus and Solea vulgaris collected from the Gulf of Gabes in Tunisia

To select a marine teleost fish which can be used as a bioindicator of cadmium (Cd) pollution in the Gulf of Gabes in Tunisia, Cd concentrations in liver and gill were compared in three benthic fish species including Salaria basilisca, Zosterisessor ophiocephalus and Solea vulgaris. Fish samples were collected from three selected sites in the Gulf of Gabes, with different degrees of Cd contamination: the industrialized coast of Sfax (S1), the coast of Douar Chatt (S2) and the coast of Luza (S3). The results shows that Cd concentrations in both sediment and water collected from S1 were significantly higher (p < 0.0001) than those from S2 and S3. For each species, Cd concentrations, in both liver and gill, showed the decreasing order: S1 > S2 > S3. The highest concentration of Cd was detected in the liver of S. basilisca, and only S. basilisca showed bioaccumulation factors (BAF) greater than 1 in all studied sites. In S1 and S2, BAF values respect the following order: S. basilisca > Z. ophiocephalus > S. vulgaris. These results of significant bioaccumulation of Cd, in terms of hepatic concentrations and bioaccumulation factors, indicated that S. basilisca can be used as bioindicator to evaluate the evolution of Cd pollution in the Gulf of Gabes.     

A fuzzy multi-attribute approach to select the welding process at high pressure vessel manufacturing

Metal welding process selection calls for extensive know-how which deals with a huge amount of knowledge. Hence, the automation of knowledge through a knowledge-based system will greatly enhance the decision-making process. Fuzzy analytical hierarchy process (AHP)-TOPSIS investigates the relative welding process selection factors and it can compare and evaluate different welding processes between 0 and 1.This paper describes a knowledge-base system developed for identifying the most appropriate welding processes to suit specific circumstances. In the present study, nine important welding processes were used in the system. Ten parameters namely alloy class, material thickness, deposition rate, design application, joint configuration, operator factor, capital cost, equipment portability, filler metal utilization and welding position, are used to determine the best selection among competitive welding processes for high pressure vessel production. Also the sensitivity analysis was carried out for five cases.     

Kinetics and thermodynamics studies of cobalt,strontium and caesium sorption on marble from aqueous solution

Adsorption onto solid phases plays an important role in the transport of radionuclides and contaminants in the environment. Radionuclides in radioactive waste have been considered to be hazardous pollutants, and their migration with groundwater is strongly affected by sorption on the geologic media. Therefore, the knowledge of radionuclide sorption is of great importance in the management of radioactive wastes. A series of batch sorption experiments were conducted separately to investigate sorption and transport behaviour of cobalt, strontium and caesium on and through marble. Batch-mode kinetic and equilibrium studies have been carried out at different temperatures. Sorption experimental data were analysed by kinetic and isotherm models. Based on the results obtained, it can be concluded that the marble is an economic and efficient retaining material for environmental hazardous migration and/or leakage of some radionuclides. Therefore, this study could be used as a starting point to establish and consider that rock as a reactive barrier around the disposal facilities at the nuclear activity centres.     

Spongy Ni/Fe carbonate-fluorapatite catalyst for efficient conversion of cooking oil waste into biodiesel

Environmental Chemistry Letters - Biodiesel produced from animal and plant fat oils is sustainable, but there is a need for efficient heterogeneous catalysts for transesterification of crude oils...     

Effect of leachate recirculation on mesophilic anaerobic digestion of food waste

The effects of using untreated leachate for supplemental water addition and liquid recirculation on anaerobic digestion of food waste was evaluated by combining cyclic water recycle operations with batch mesophilic biochemical methane potential (BMP) assays. Cyclic BMP assays indicated that using an appropriate fraction of recycled leachate and fresh make up water can stimulate methanogenic activity and enhance biogas production. Conversely increasing the percentage of recycled leachate in the make up water eventually causes methanogenic inhibition and decrease in the rate of food waste stabilization. The decrease in activity is exacerbated as the number cycles increases. Inhibition is possibly attributed to accumulation and elevated concentrations of ammonia as well as other waste by products in the recycled leachate that inhibit methanogenesis.