A survey on the utility of the USEPA CADDIS stressor identification procedure

The Environmental Protection Agency (EPA) has made available on the worldwide web a systematic stream stressor identification procedure, the “Causal Analysis/Diagnosis Decision Information System” or CADDIS. We report here the results of a survey of regulators and scientists in 11 states who use CADDIS or another stressor identification procedure in their work. The 13 survey questions address guidelines as to what impairment scenarios to approach with stressor identification, what information is needed to perform stressor identification, and what the stakeholder role is in performing stressor identification. At the time of this survey (the summer of 2009), the EPA CADDIS website was less commonly used among the state regulators surveyed than the published EPA stressor identification document on which it is based. The respondents generally find the EPA stressor identification procedure useful and capable of being adapted to their individual needs. Survey respondents all use stressor identification in their Total Maximum Daily Load work, but also in a wide variety of other applications. All the “types of evidence” included in the CADDIS stressor identification procedure are used by the practitioners surveyed with the exception of the results of ecological simulation models. While the CADDIS documentation encourages the involvement of stakeholders in stressor identification, most respondents do not assemble stakeholder teams of local officials and citizens to participate in stressor analyses.     

Determination of some mineral contents of prickly pear (Opuntia ficus-indica L.) seed flours

The aim of this study was to determine some mineral contents of prickly pear (Opuntia f?cus-indica L.) seeds collected from different locations. The mineral contents of seeds were established by inductively coupled plasma atomic emission spectrometry. All the seeds contained Ca, K, Mg and P at high levels. Calcium content ranged between 268.5 (sample no. 11) and 674.8 ppm (sample no. 4). The level of K changed between 346.7 (sample no. 1) and 676.1 ppm (sample no. 13). Phosphorus content of seeds varied between 1,173.6 (sample no. 14) and 1,871.3 ppm (sample no. 1). It is apparent that seeds are good sources of the macro and micro minerals and can be consumed as a food ingredient to provide nutrition.     

Spatial patterns of heavy metals in soil under different geological structures and land uses for assessing metal enrichments

One hundred and thirty composite soil samples were collected from Hamedan county, Iran to characterize the spatial distribution and trace the sources of heavy metals including As, Cd, Co, Cr, Cu, Ni, Pb, V, Zn, and Fe. The multivariate gap statistical analysis was used; for interrelation of spatial patterns of pollution, the disjunctive kriging and geoenrichment factor (EF_G) techniques were applied. Heavy metals and soil properties were grouped using agglomerative hierarchical clustering and gap statistic. Principal component analysis was used for identification of the source of metals in a set of data. Geostatistics was used for the geospatial data processing. Based on the comparison between the original data and background values of the ten metals, the disjunctive kriging and EF_G techniques were used to quantify their geospatial patterns and assess the contamination levels of the heavy metals. The spatial distribution map combined with the statistical analysis showed that the main source of Cr, Co, Ni, Zn, Pb, and V in group A land use (agriculture, rocky, and urban) was geogenic; the origin of As, Cd, and Cu was industrial and agricultural activities (anthropogenic sources). In group B land use (rangeland and orchards), the origin of metals (Cr, Co, Ni, Zn, and V) was mainly controlled by natural factors and As, Cd, Cu, and Pb had been added by organic factors. In group C land use (water), the origin of most heavy metals is natural without anthropogenic sources. The Cd and As pollution was relatively more serious in different land use. The EF_G technique used confirmed the anthropogenic influence of heavy metal pollution. All metals showed concentrations substantially higher than their background values, suggesting anthropogenic pollution.     

The use of multiple tracers for tracking wastewater discharges in freshwater systems

The assessment of potential impacts of wastewater effluent discharges in freshwater systems requires an understanding of the likely degrees of dilution and potential zones of influence. In this study, four tracers commonly present in wastewater effluents were monitored to compare their relative effectiveness in determining areas in freshwater systems that are likely to be impacted by effluent discharges. The four tracers selected were the human pharmaceutical carbamazepine, anthropogenic gadolinium, fluorescent-dissolved organic matter (fDOM), and electrical conductivity (EC). The four tracers were monitored longitudinally in two distinct freshwater systems receiving wastewater effluents, where one site had a high level of effluent dilution (effluent <1 % of total flow) and the other site had a low level of effluent dilution (effluent ～50 % of total flow). At both sites, the selected tracers exhibited a similar pattern of response intensity downstream of discharge points relative to undiluted wastewater effluent, although a number of anomalies were noted between the tracers. Both EC and fDOM are non-specific to human influences, and both had a high background response, relative to the highly sensitive carbamazepine and anthropogenic gadolinium responses, although the ease of measuring EC and fDOM would make them more adaptable in highly variable systems. However, the greater sensitivity and selectivity of carbamazepine and gadolinium would make their combination with EC and fDOM as tracers of wastewater effluent discharges highly desirable to overcome potential limitations of individual tracers.     

Assessment of drinking water quality using ICP-MS and microbiological methods in the Bholakpur area,Hyderabad, India

A total of 16 people died and over 500 people were hospitalized due to diarrhoeal illness in the Bholakpur area of Hyderabad, India on 6th May 2009. A study was conducted with immediate effect to evaluate the quality of municipal tap water of the Bholakpur locality. The study consists of the determination of physico-chemical properties, trace metals, heavy metals, rare earth elements and microbiological quality of drinking water. The data showed the variation of the investigated parameters in samples as follows: pH 7.14 to 8.72, EC 455 to 769 μS/cm, TDS 303.51 to 515.23 ppm and DO 1.01 to 6.83 mg/L which are within WHO guidelines for drinking water quality. The water samples were analyzed for 27 elements (Li, Be, B, Na, Mg, Al, Si, K, Ca, V, Cr, Mn, Fe, Ni, Co, Cu, Zn, As, Se, Rb, Sr, Mo, Ag, Cd, Sb, Ba and Pb) using inductively coupled plasma-mass spectrometry (ICP-MS). The concentrations of Fe (0.12 to 1.13 mg/L), Pb (0.01 to 0.07 mg/L), Cu (0.01 to 0.19 mg/L), Ni (0.01 to 0.15 mg/L), Al (0.16 to 0.49 mg/L), and Na (38.36 to 68.69 mg/L) were obtained, which exceed the permissible limits of the World Health Organization (WHO) for drinking water quality guidelines. The remaining elements were within the permissible limits. The microbiological quality of water was tested using standard plate count, membrane filtration technique, thermotolerant coliform (TTC), and most probable number (MPN) methods. The total heterotrophic bacteria ranged from 1.0 × 10⁵ to 18 × 10⁷ cfu/ml. Total viable bacteria in all the water samples were found to be too numerable to count and total number of coliform bacteria in all water samples were found to be of order of 1,100 to >2,400 MPN index/100 ml. TTC tested positive for coliform bacteria at 44.2°C. All the water samples of the study area exceeded the permissible counts of WHO and that (zero and minimal counts) of the control site (National Geophysical Research Institute) water samples. Excessively high colony numbers indicate that the water is highly contaminated with microorganisms and is hazardous for drinking purposes. Bacteriological pollution of drinking water supplies caused diarrhoeal illness in Bholakpur, which is due to the infiltration of contaminated water (sewage) through cross connection, leakage points, and back siphoning.     

Heavy metal concentrations in roadside soil and street dust from Petra region,Jordan

Concentrations of Cd, Cu, Fe, Pb, and Zn were measured in the samples of street dust and surface roadside soil before Jordan switched to unleaded fuel usage. The samples were collected from Petra, the most tourist-attractive site in Jordan. The samples were analyzed for heavy metals by atomic absorption spectrophotometry. Our results show that the distribution of metals in the soil samples is affected by wind direction in the investigated area. The highest level of metals was found in the eastern parts of the roads due to the westerly-dominant wind in the studied area. The contamination levels of metals decrease as the distance from the edge of the road increases. In the roadside soil samples, the means for the concentrations of the metals at 1 m from the east side of the main road are 1.0, 19.1, 3791.4, 177.0, and 129.0 mg kg^?1 for Cd, Cu, Fe, Pb, and Zn, respectively. In the samples of street dust, the means of the concentrations of the metals in the investigated area are 9.7, 11.8, 4694.4, 31.6, and 24.8 mg kg^?1 for Cd, Cu, Fe, Pb, and Zn, respectively. In conclusion, the lithogenic origins (traffic emissions) are responsible for the diffusion of these metals in the studied region.     

Proposing of new building scheme and composite towards global warming mitigation for Malaysia

The building sector has been regarded as a potential sector where there is large capacity to reduce the climate change effect. This study has proposed solutions to mitigate environmental impacts and achieve low CO₂ emission from residential sector. Therefore, full life cycle assessment (LCA) has been run to assess the CO₂ emission and its effect on the atmosphere and climate change. Based on the result, timber scheme is the best choice due to releasing less CO₂ emissions to the atmosphere. However, house builders in Malaysia have almost completely neglected timber as a building material, with timber use as building components reduced to 5%. In this study, LCA Software was used to assess CO₂ emissions from different wall construction. The alternative building scheme has been made by reinforce steel stud, wooden beam and timber wall (S8) to improve the scheme deficiency while releasing less CO₂ emissions compared to other schemes. Therefore, S8 has a decreased CO₂ effect by 85% less than precast concrete frame and 90% less than brick over their lifetime. (S8) increased the load bearing compared to conventional timber beam. Thus, new scheme S8 could be replaced by current scheme and promote more adjustable scheme for Malaysian housing.     

Preparation and Fundamental Characterization of Cellulose Nanocrystal from Oil Palm Fronds Biomass

The objective of this work was to isolate cellulose nanocrystal (CNC) from oil palm fronds (Elaeis guineensis) and its subsequent characterization. Isolation involves sodium hydroxide/anthraquinone pulping with mechanical refining followed by total chlorine free bleaching (includes oxygen delignification, hydrogen peroxide oxidation and peracetic acid treatment) before acid hydrolysis. Bleaching significantly decreased kappa number and increased α-cellulose percentage of fibers as confirmed by Technical Association of the Pulp and Paper Industry standards. Transmission electron microscopy (TEM), X-ray diffraction, Fourier transform infrared spectroscopy and thermogravimetric analysis revealed that acid hydrolysis along with bleaching improved crystallinity index and thermal stability of the extracted nanocrystals. It was observed that CNC maintained its cellulose 1 polymorph despite hydrolysis treatment. Mean diameter as observed by TEM and average fiber aspect ratio of obtained CNC was 7.44 ± 0.17 nm and 16.53 ± 3.52, respectively making it suitable as a reinforcing material for nanocomposite.     

Simulated climate adaptation in stormwater systems: evaluating the efficiency of adaptation strategies

Adaptations in infrastructure may be necessitated by changes in temperature and precipitation patterns to avoid losses and maintain expected levels of service. A roster of adaptation strategies has emerged in the climate change literature, especially with regard to timing: anticipatory, concurrent, or reactive. Significant progress has been made in studying climate change adaptation decision making that incorporates uncertainty, but less work has examined how strategies interact with existing infrastructure characteristics to influence adaptability. We use a virtual testbed of highway drainage crossings configured with a selection of actual culvert emplacements in Colorado, USA, to examine the effect of adaptation strategy and culvert characteristics on cost efficiency and service level under varying rates of climate change. A meta-model approach with multinomial regression is used to compare the value of better climate change predictions with better knowledge of existing crossing characteristics. We find that, for a distributed system of infrastructural units like culverts, knowing more about existing characteristics can improve the efficacy of adaptation strategies more than better projections of climate change. Transportation departments choosing climate adaptation strategies often lack detailed data on culverts, and gathering that data could improve the efficiency of adaptation despite climate uncertainty.     

Anti-oviposition activities of used sock media against a dengue vector: prospects of eco-friendly control and solutions to pollution

Yearly, huge amounts of sock refuse are discarded into the environment. Socks contain many molecules, and worn ones, which are rich in smell-causing bacteria, have a strong influence on animals’ behaviors. But the impacts of sock odor on the oviposition behavior of dengue vectors are unknown. We assessed whether Aedes albopictus changes its oviposition activity in response to the presence of used socks extract (USEx) in potential breeding grounds, using choice and no-choice bioassays (NCB). When furnished even chances to oviposit in two sites holding USEx and two others containing water (control), Ae. albopictus deposited significantly less eggs in USEx than in water sites. A similar pattern of oviposition preference was also observed when there were more oviposition options in water. When there were greater oviposition opportunities in USEx sites, Ae. albopictus oviposited preferentially in water. Females laid significantly more eggs during the NCB involving water than USEx. Also, significantly more mature eggs were retained by females in the NCB with USEx than in that with water. These observations strongly suggest the presence of molecules with either repellent or deterrent activities against Ae. albopictus females and provide an impetus to advocate the integration of used socks in dengue control programs. Such applications could be a realistic end-of-life recourse to reroute this waste from landfills.