Atmospheric trace metal pollution in the Naples urban area based on results from moss and lichen bags

The results of trace element content analysed in Sphagnum capillifolium and Pseudevernia furfuracea exposed in bags in 1999 are reconsidered to evaluate the reliability of moss and lichen transplants to detect urban trace element atmospheric pollution, using Naples as a case example. After 4 months' exposure, trace element concentrations were at least twice as high as the pre-exposure values and in general higher in Sphagnum than in Pseudevernia. Moss samples were enriched in the following order: As=Cu>Mo>Pb>V>Co>Cr>Zn; lichen samples in the order: Mo>Cu>As=Co=Ni>V>Pb. Based on the calculation of a cumulative load factor, all sites located along the coast had higher trace element loads compared to sites in the hilly inland area. Complementary SEM, TEM and EDS observations showed, despite significant damage to tissue and cell integrity, the recurrent presence of particulate matter in moss and lichen, indicating the considerable presence of dust in the urban atmosphere which, according to chemical composition, may be due both to anthropogenic and natural sources such as volcanic rock and soil and sea salts.     

Organochlorine residues in odontocete species from the southeast coast of India

Blubber from bottle-nose dolphins, spinner dolphins, humpback dolphin (Tursiops truncatus, Stenella longirostris and Sousa chinensis) were collected from the Bay of Bengal (southeast coast of India) and analyzed for the organochlorine pesticides hexachlorocyclohexane (HCHs), p,p'-dichlorodiphenyl trichloroethane (DDTs), and polychlorinated biphenyls (PCBs). All nine specimens analyzed contained considerable levels of all the three chemical classes where DDT was in the range of 3330-23330 ng/g; HCHs in the range of 95-765 ng/g; and PCBs in the range of 210-1220 ng/g (wet weight basis). The reasons for this and the variations in the isomer pattern of HCHs and DDT and its metabolites in marine mammal tissues are discussed.     

Halogenated compounds in a dated sediment core of the Teltow Canal, Berlin: time related sediment contamination

To study the recent contamination history of DDT (1,1,1-trichloro-2,2-bis(chlorophenyl)ethane) and its metabolites, as well as methoxychlor (1,1,1-trichloro-2,2-bis(p-methoxyphenyl)ethane), chlorfenson (4-chlorophenyl-p-chlorobenzenesulfonate), and further halogenated aromatics, a sediment core was collected from the Teltow Canal in Berlin (Germany). The sampling site is located nearby a former industrial point source, where recently analyses on pre-samples have indicated high concentrations of halogenated organic compounds. The deposition time of the investigated sediments was determined by gamma-spectrometrical dating. Pollution trends of selected contaminants were attributed to a time period between 5 and 10 years. Concentration profiles reflect not only the recent pollution history of these compounds, but also the time-depending effects of the ban, restriction and termination of DDT-production in the German Democratic Republic (GDR). DDT and other chlorinated aromatic compounds were produced onsite until the late 1980s. Maximum values of 133 mg kg(-1) (dry weight) for p,p'-DDD (1,1-dichloro-2,2-bis(chlorophenyl)ethane) and approximately 100 mg kg(-1) (dry weight) for p,p'-DDMS (1-chloro-2,2-bis(chlorophenyl)ethane), main metabolites of the anaerobic degradation of DDT, were determined. The occurrence of all selected contaminants, most of which have been banned more than 10 years ago, demonstrate recent contamination pathways, and the necessity of a continuous long-term monitoring of the affected environment.     

Bioconversion of olive-mill dry residue by Fusarium lateritium and subsequent impact on its phytotoxicity

The present study investigated the ability of the non-pathogenic fungus Fusarium lateritium to either degrade or modify aromatic substances in olive-mill dry residue (DOR) and to reduce its phytotoxicity. The 80% reduction of ethylacetate extractable phenols in DOR colonized by the fungus for 20 weeks appeared to be due to polymerization reactions of phenol molecules as suggested by mass-balance ultrafiltration and size-exclusion chromatography experiments. Several lignin-modifying oxidases, including laccase, Mn-peroxidase and Mn-inhibited peroxidase were detected in F. lateritium solid-state cultures. Tests performed with tomato seedlings in soils containing 6% (w/w) sterilized non-inoculated DOR showed that the waste was highly phytotoxic. By contract, F. lateritium growth on DOR for 20 weeks led to a complete removal of the waste toxicity and to a higher shoot dry weight of tomato plants than that obtained in the absence of DOR.     

Degradation of 2,4,6-trinitrotoluene by selected helophytes

Four emergent plants (helophytes, synonyms emersion macrophytes, marsh plants, etc.) Phragmites australis, Juncus glaucus, Carex gracillis and Typha latifolia were successfully used for degradation of TNT (2,4,6-trinitrotoluene) under in vitro conditions. The plants took up and transformed more than 90% of TNT from the medium within ten days of cultivation. The most efficient species was Ph. australis which took up 98% of TNT within ten days. The first stable degradation products 4-amino-2,6-dinitrotoluene (4-ADNT) and 2-amino-4,6-dinitrotoluene (2-ADNT) were identified and analysed during the cultivation period. [14C] TNT was used for the detection of TNT degradation products and their compartmentalization in plant tissues after two weeks of cultivation. Forty one percent of 14C was detected as insoluble or bound in cell structures: 34% in roots and 8% in the aerial parts. These results open the perspective of using the above-mentioned plants for the remediation of TNT contaminated waters.     

The recovery of ammonia and hydrogen sulfide from ground-level area sources using dynamic isolation flux chambers: bench-scale studies

Controlled bench-scale laboratory experiments were conducted to evaluate the recovery of ammonia (NH3) and hydrogen sulfide (H2S) from dynamic isolation flux chambers. H2S (80-4000 ppb) and NH3 (5000-40,000 ppb) samples were diffused through the flux chamber to simulate ground level area source emissions while measuring the inlet and outlet flux chamber concentrations simultaneously. Results showed that the recovery of H2S during a 30-min sampling time was almost complete for concentrations >2000 ppb. At the lowest concentration of 80 ppb, 92.55% of the H2S could be recovered during the given sampling period. NH3 emissions exhibited similar behavior between concentrations of 5000-40,000 ppb. Within the 30-min sampling period, 92.62% of the 5000-ppb NH3 sample could be recovered. Complete recovery was achieved for concentrations >40,000 ppb. Predictive equations were developed for gas adsorption. From these equations, the maximum difference between chamber inlet and outlet concentrations of NH3 or H2S was predicted to be 7.5% at the lowest concentration used for either gas. In the calculation of emission factors for NH3 and H2S, no adsorption correction factor is recommended for concentrations >37,500 ppb and 2100 ppb for NH3 and H2S, respectively. The reported differences in outlet and inlet concentration above these ranges are outside the fullscale sensitivity of the gas sensing equipment. The use of 46-90 m of Teflon tubing with the flux chambers has apparently no effect on gas adsorption, because recovery was completed almost instantaneously at the beginning of the tests.     

Role of ethylene diurea (EDU) in assessing impact of ozone on Vigna radiata L. plants in a suburban area of Allahabad (India)

A field study was conducted to evaluate the suitability of ethylene diurea (N-[2-(2-oxo-1-imidazolidinyl)ethyl]-N'-phenylurea; EDU) in assessing the impact of O3 on mung bean plants (Vigna radiata L. var. Malviya Jyoti) grown in suburban area of Allahabad city situated in a dry tropical region of India. EDU is a synthetic chemical having anti-ozonant property. Mean monthly O3 concentration varied between 64 and 69 microg m(-3) during the experimental period. In comparison to EDU-treated plants, non-EDU-treated plants showed significant reductions in plant growth and yield under ambient conditions. Significant favourable effects of EDU-application were observed with respect to photosynthetic pigments, soluble protein, ascorbic acid and phenol contents. EDU-treated plants maintained higher levels of pigments, protein and ascorbic acid in foliage as compared to non-EDU-treated ones. The study clearly demonstrated that EDU alleviates the unfavourable effects of O3 on mung bean plants, and therefore can be used as a tool to assess the growth and yield losses in areas having higher O3 concentrations.     

Tylosin sorption to silty clay loam soils, swine manure, and sand

The objectives of this study were to assess sorption and desorption of tylosin, a macrolide antimicrobial chemical used in swine, cattle, and poultry production, in three silty clay loam soils of South Dakota and compare soil sorption to sand and manure sorption. The silty clay loam soils, from a toposequence in eastern South Dakota, standardized sand samples, and swine manure were used in 24-h batch sorption studies with tylosin concentrations ranging from 25 to 232 micro mole/L. Desorption from soil was conducted over a four-day period. Partition coefficients, based on the Freundlich isotherm (K(f)) or K(d) values, were calculated. K(f) values for the silty clay loams were similar, not influenced by landscape position, and averaged 1,350 with isotherm slopes ranging from 0.85 to 0.93. K(f) values for sand were dependent on solution/sand ratios and pH, ranging from 1.4 to 25.1. K(d) values of manure were dependent on the solution type and ranged from 840 L/kg with urine to about 175 L/kg when sorbed from water. Desorption of tylosin from each soil over the four-day period was < 0.2% of the amount added. The soils' high K(f) values and low desorption amounts suggest that once tylosin is in these soils, leaching to lower depths may not occur. However, this does not preclude runoff with soil eroded particles. If tylosin reaches a sand aquifer, through bypass flow or other mechanism(s), movement in the aquifer most likely would occur.     

Effects of in-situ ozonation on indigenous microorganisms in diesel contaminated soil: survival and regrowth

Soil column experiments were conducted to investigate the effects of chemical oxidation on the survival of indigenous microbes (i.e., heterotrophic microbes, phenanthrene-degrading microbes, and alkane-degrading microbes) for field soil contaminated with diesel fuel. Rapid decreases of total petroleum hydrocarbons (TPH) and aromatics of diesel fuel were observed within the first 60 min of ozone injection; after 60 min, TPH and aromatics decreased asymptotically with ozonation time. The three types of indigenous microbes treated were very sensitive to ozone in the soil column experiment, hence the microbial population decreased exponentially with ozonation time. The numbers of heterotrophic, alkane-degrading, and phenanthrene-degrading bacteria were reduced from 10(8) to 10(4), 10(7) to 10(3), and 10(6) CFU g soil(-1) to below detection limit after 900 min of ozonation, respectively. Except for the soil sample ozonated for 900 min, incubation of ozone-treated soil samples that were not limited by oxygen diffusion showed further removal of TPH. The soil samples that were ozonated for 180 min exhibited the lowest concentration of TPH and the highest regrowth rate of the heterotrophic and alkane-degrading populations after the 9 weeks of incubation.     

Properties of pyrolytic chars and activated carbons derived from pilot-scale pyrolysis of used tires

Used tires were pyrolyzed in a pilot-scale quasi-inert rotary kiln. Influences of variables, such as time, temperature, and agent flow, on the activation of obtained char were subsequently investigated in a laboratory-scale fixed bed. Mesoporous pores are found to be dominant in the pore structures of raw char. Brunauer-Emmett-Teller (BET) surfaces of activated chars increased linearly with carbon burnoff. The carbon burnoff of tire char achieved by carbon dioxide (CO2) under otherwise identical conditions was on average 75% of that achieved by steam, but their BET surfaces are almost the same. The proper activation greatly improved the aqueous adsorption of raw char, especially for small molecular adsorbates, for example, phenol from 6 to 51 mg/g. With increasing burnoff, phenol adsorption exhibited a first-stage linear increase followed by a rapid drop after 30% burnoff. Similarly, iodine adsorption first increased linearly, but it held as the burnoff exceeded 40%, which implied that the reduction of iodine adsorption due to decreasing micropores was partially made up by increasing mesopores. Both raw chars and activated chars showed appreciable adsorption capacity of methylene-blue comparable with that of commercial carbons. Thus, tire-derived activated carbons can be used as an excellent mesoporous adsorbent for larger molecular species.