Seasonal and spatial patterns of metals at a restored copper mine site II. Copper in riparian soils and Bromus carinatus shoots

Soil and plants were sampled throughout winter and spring near a perennial stream traversing a restored mine site in a winter-rainy climate. Within 1m of an acidic reach of the stream, soil had pH 3-5 and 50-100 microg/g "bioavailable" copper (extractable with 0.01 M CaCl2). Soil 2-3 m from the stream had pH 5-8 and lower (less than 3 microg/g) bioavailable copper. "Oxide-bound" copper (extractable with 2N HCl) was 50-100 microg/g at most locations. Copper concentrations in the shoots of field-collected Bromus carinatus declined from 20 microg/g in winter to 2 microg/g in spring at all sampling sites. A similar temporal pattern was found in plants grown under controlled conditions. Thus B. carinatus has a developmental program for control of shoot copper concentration, causing a seasonally-varying pattern of copper phytoaccumulation over a large range of copper availability in the soil.     

State of energy consumption and CO2 emission in Bangladesh

Carbon dioxide (CO2) is one of the most important gases in the atmosphere, and is necessary for sustaining life on Earth. It is also considered to be a major greenhouse gas contributing to global warming and climate change. In this article, energy consumption in Bangladesh is analyzed and estimates are made of CO2 emission from combustion of fossil fuel (coal, gas, petroleum products) for the period 1977 to 1995. International Panel for Climate Change guidelines for national greenhouse gas inventories were used in estimating CO2 emission. An analysis of energy data shows that the consumption of fossil fuels in Bangladesh is growing by more than 5% per year. The proportion of natural gas in total energy consumption is increasing, while that of petroleum products and coal is decreasing. The estimated total CO2 release from all primary fossil fuels used in Bangladesh amounted to 5072 Gigagram (Gg) in 1977, and 14 423 Gg in 1995. The total amounts of CO2 released from petroleum products, natural gas, and coal in the period 1977-1995 were 83 026 Gg (50% of CO2 emission), 72 541 Gg (44% of CO2 emission), and 9545 Gg (6% CO2 emission), respectively. A trend in CO2 emission with projections to 2070 is generated. In 2070, total estimated CO2 emission will be 293 260 Gg with a current growth rate of 6.34% y . CO2 emission from fossil fuels is increasing. Petroleum products contribute the majority of CO2 emission load, and although the use of natural gas is increasing rapidly, its contribution to CO2 emission is less than that of petroleum products. The use of coal as well as CO2 emission from coal is expected to gradually decrease.     

Influences of macroalga-derived dissolved organic carbon on the aquatic toxicity of copper and cadmium

In this study, the effect of dissolved organic carbon (DOC) derived from macroalga (Sargassum) on the acute toxicity of copper (Cu) and cadmium (Cd) to a freshwater cladoceran (Daphnia magna) was investigated. Potassium-loaded macroalga was incubated with ultrapure water to extract macroalgal DOC, which was then spiked with the constituents of the Elendt M7 hard water media. The 48 h median lethal concentration of Cu increased linearly with DOC levels but that of Cd was relatively independent of DOC levels (0-44 mg l(-1)). The independence of Cd toxicity on DOC level might be due to the competitive effect of high calcium concentrations in the media with Cd for the binding sites of DOC. The decreased Cu toxicity was a result of reduced Cu uptake as evidenced in a separate accumulation test. Also, the capability of the macroalgal DOC on reducing Cu toxicity was found to be comparable to DOC tested in other studies. Therefore, the present study suggested that the biosorption treatment process using macroalgae should consider the effect of DOC release from the biomass as a step of modifying the metal toxicity as well as influencing metal biosorption capacity.     

Changes in amino acid profile and metal content in seeds of Cicer arietinum L. (chickpea) grown under various fly-ash amendments

Seeds of Cicer arietinum L. plants are edible and a valuable source of protein. Accumulation of toxic metals in the edible part of the plant, grown in fields close to fly-ash (FA) landfills, may pose a threat to human health. In the present study, the effects of FA and its amendments with different ameliorants viz., garden soil (GS), press mud (PM) and saw dust (SD), on total soluble protein contents, amino acid composition and metal accumulation in seeds were investigated in var. CSG-8962 and var. C-235 of C. arietinum. Plants accumulated adequate amounts of essential metals viz. Fe, Cu, Zn in seeds, while the toxic metals such as Cd and Cr were taken up in smaller quantities. The accumulation of Cr and Cd was less in var. C-235 than var. CSG-8962. Amendment of FA with PM enhanced the amount of soluble protein and amino acids in both varieties and was found to be superior among all tested ameliorants. Both quantitative and qualitative analysis of amino acids showed better response in var. C-235 as compared to var. CSG-8962. Thus var. C-235 seems to be suitable for cultivation in FA contaminated areas due to more accumulation of essential metals and less accumulation of toxic metals in seeds. Application of PM may further improve the growth of plants and nutritional quality of seeds.     

Effect of farmyard manure application on boron adsorption-desorption characteristics of some soils

Boron (B) availability to crop plants depends on soil properties as well as management practices like liming, fertilization and use of organic manures. To assess the effect of farmyard manure (FYM) application on availability of added B, adsorption-desorption of B was investigated in five different soils receiving varying doses of FYM (0, 5 and 10 g FYM kg(-1) soil). Two surfaces Freundlich model was found best to account for B adsorption-desorption data of all soils. Application of FYM increased B adsorption capacities pertaining to low (K1) and high (K2) concentration ranges in all soils, except Soil C (Alfisol) having a pH of 9.8, in which the higher rate of FYM decreased the value of K2. Application of FYM did not change B desorption capacities of soils corresponding to low B concentration range (K(1)(1)) significantly, however, it increased B desorption capacity pertaining to high B concentration (K(1)(2)) in all soils, except Soils C (Alfisol) and E (Entisol) having pH of 9.8 and 5.1, respectively. Application of FYM increased the desorption slope factor applicable to low concentration range (1/n(1)(1)) in Soil A (Inceptisol), but decreased it in Soil E (Entisol). The 1/n(1)(2) (desorption slope factor applicable to high concentration range) decreased with FYM application in all soils except Soil E (Entisol), where it was increased. Boron desorption index (slope(ads)/slope(des)) decreased with FYM application in low B concentration range, but increased in high concentration range for all soils except soil E (Entisol, pH 5.1), in which a reverse trend was observed. Application of FYM increased the retention of added B in soils and may help reducing the leaching losses.     

Bagasse-assisted bioremediation of ammonia from shrimp farm wastewater.

Development of new economically feasible ecofriendly products from agricultural wastes or byproducts for shrimp farm wastewater treatment is the objective of our continued research. Ammonia is a nitrogenous toxicant, which is commonly found in wastewater from shrimp farms. In the present study, we explored the possibility of the use of simply and inexpensively prepared bagasse products so that this abundant crop byproduct could be used to remove ammonia from shrimp farm wastewater. Bagasse, a natural highly fibrous lignocellulosic byproduct of sugarcane, was converted into five different products. Experimental results have shown that ammonia is efficiently removed from wastewater by four bagasse products with a dose of 1 to 6 g/L within 24 hours. The effect of bagasse products on other water quality parameters and growth kinetics of biofilm bacteria onto bagasse fiber have also been studied. Efficacies of products were compared by using statistical analysis. Products developed from bagasse are useful and economical.     

Ammonium, nitrate and nitrite nitrogen and nitrate reductase enzyme activity in groundnut (Arachis hypogaea L.) fields after diazinon, imidacloprid and lindane treatments

Impacts of diazinon (O,O-diethyl O-2-isopropyl-6-methylpyrimidin-4-yl phosphorothioate), imidacloprid [1-(6-chloro-3-pyridylmethyl)-N-nitroimidazolidin-2-ylideneamine] and lindane (1,2,3,4,5.6-hexachlorocyclohexane) treatments on ammonium, nitrate, and nitrite nitrogen and nitrate reductase enzyme activities were determined in groundnut (Arachis hypogaea L.) field for three consecutive years (1997 to 1999). Diazinon was applied for both seed- and soil-treatments but imidacloprid and lindane were used for seed treatments only at recommended rates. Diazinon residues persisted for 60 days in both the cases. Average half-lives (t1/2) of diazinon were found 29.3 and 34.8 days respectively in seed and soil treatments. In diazinon seed treatment, NH4(+), NO3(-), and NO2(-) nitrogen and nitrate reductase activity were not affected. Whereas, diazinon soil treatment indicated significant increase in NH4(+)-N in a 1-day sample, which continued until 90 days. Some declines in NO3(-)N were found from 15 to 60 days. Along with this decline, significant increases in NO2(-)N and nitrate reductase activity were found between 1 and 30 days. Imidacloprid and lindane persisted for 90 and 120 days with average half-lives (t1/2) of 40.9 and 53.3 days, respectively. Within 90 days, imidacloprid residues lost by 73.17% to 82.49% while such losses for lindane residues were found 78.19% to 79.86 % within 120 days. In imidacloprid seed-treated field, stimulation of NO3(-)N and the decline in NH4+NO2(-)-N and nitrate reductase enzyme activity were observed between 15 to 90 days. However, lindane seed treatment indicated significant increases in NH4(+)-N, NO2(-)-N and nitrate reductase activity and some adverse effects on NO3(-)N between 15 and 90 days.     

Evaluating the role of desorption in bioavailability of sediment-associated contaminants using oligochaetes, semipermeable membrane devices and Tenax extraction

The success of the rapidly desorbing fraction as an available fraction was challenged by using sediment ingesting and non-ingesting oligochaetes (Lumbriculus variegatus) together with passive samplers (semipermeable membrane devices, SPMDs) in accumulation and kinetic modelling exercises for carbon-14 labelled model compounds (pyrene, benzo[a]pyrene and 3,4,3',4'-tetrachlorobiphenyl). Passive samplers clearly produced lower uptake rate constants and steady state factors than either of the oligochaete treatments when residue concentrations were based on animal lipid or total SPMD weight. The rapidly desorbing chemical fractions in sediments did not show a significant relationship with the biota sediment accumulation factors or SPMD accumulation factors. A distinctly better relationship was observed between the accumulation factors and the desorption rate constants. The results support the assumption that desorption plays an important role in bioavailability, although animal behaviour and the diffusional limitations of hydrophobic contaminants in sediment together probably affect the actual available pool.     

Calcite-seeded crystallization of calcium phosphate for phosphorus recovery

For phosphorus recovery from wastewater, the present paper aims at understanding the crystallization of calcium phosphate by using calcites (Juraperle and Coccolith) as seeds from hard water. Synthetic hard water with 60 mgCl(-1) carbonate and 10 mgPl(-1) phosphate was prepared and used in the batch experiments of calcite-seeded crystallization. The solution composition was measured throughout the batch crystallization process, and the corresponding saturation indices with respect to the minerals were calculated with PHREEQC Program. The surface of the calcite seeds was observed and measured with environmental scanning electron microscopy (ESEM), Fourier transform infrared (FTIR) and BET method. The studies show that both calcites are effective seeds for the crystallization of calcium phosphate from hard water; the used calcites are more efficient than the original ones because newly formed crystals with calcium phosphate have covered their surfaces. The studies show that the calcite seeds can be used for phosphorus recovery from hard waters.     

Fine route for an efficient removal of 2,4-dichlorophenoxyacetic acid (2,4-D) by zeolite-supported TiO2

Zeolites HY, Hbeta and HZSM-5 with different physico-chemical properties were chosen as support for TiO2 to illustrate their adsorption, dispersion and electronic structure in photocatalysis. The extent of TiO2 loading was monitored by XRD and BET surface area measurements. The adsorption capacity of HY zeolite was found to be high and hence chosen for further modification to continue the investigation. Photodegradation kinetics were carried out with 2,4-dichlorophenoxyacetic acid (2,4-D) in aqueous solution. The extent of 2,4-D degradation on TiO2/HY loading revealed the importance of adsorption in photocatalysis. Mineralisation studies on all three zeolites with 1 wt.% TiO2 loading demonstrated the good dispersion properties of TiO2/HY. Its photocatalytic activity was found to be excellent with formulated 2,4-D. Comparison of relative photonic efficiencies demonstrated that supported photocatalysts exhibited higher activity than some of the commercial photocatalysts. The high activity of supported TiO2 is due to synergistic effects of improved adsorption of 2,4-D and efficient delocalisation of photogenerated electrons by zeolite support.