Cost-performance analysis of nutrient removal in a full-scale oxidation ditch process based on kinetic modeling

A full-scale oxidation ditch process for treating sewage was simulated with the ASM2d model and optimized for minimal cost with acceptable performance in terms of ammonium and phosphorus removal. A unified index was introduced by integrating operational costs (aeration energy and sludge production) with effluent violations for performance evaluation. Scenario analysis showed that,in comparison with the baseline (all of the 9 aerators activated), the strategy of activating 5 aerators could save aeration energy significantly with an ammonium violation below 10%. Sludge discharge scenario analysis showed that a sludge discharge flow of 250–300 m3/day (solid retention time (SRT), 13–15 days) was appropriate for the enhancement of phosphorus removal without excessive sludge production. The proposed optimal control strategy was: activating 5 rotating disks operated with a mode of "111100100" ( "1"represents activation and "0" represents inactivation) for aeration and sludge discharge flow of 200 m3/day (SRT, 19 days). Compared with the baseline, this strategy could achieve ammonium violation below 10% and TP violation below 30% with substantial reduction of aeration energy cost (46%) and minimal increment of sludge production (< 2%). This study provides a useful approach for the optimization of process operation and control.     

Preparation of MgO/B2O3 coatings by plasma spraying on SUS304 surface and effects of heat-resistant

This study mainly deals with the preparation of MgO/B₂O₃ coatings by plasma spraying on the SUS304 surface and the effects of heatresistant. The power materials of low thermal conductivity were selected to control the heat divergent performance of high temperature parts. The reticular micro-structure between the cover thermal layer and the substrate was prepared by using the plasma spraying method. The powder mixture of MgO and B₂O₃ were selected as spraying materials and the SUS304 was used as the substrate material. The MgO/B₂O₃ coating was prepared on the surface of the SUS304 to provide better cover thermal performance. The properties of the microstructures and the morphologies were studied by Optical Microscope, Scanning Electron Microscope, Electron Probe Microanalyzer, and X-ray Diffraction. The results showed that the cover thermal performance has been improved.     

Homogeneous and heterogeneous reactions of anthracene with selected atmospheric oxidants

The reactions of gas-phase anthracene and suspended anthracene particles with O3 and O3-NO were conducted in a 200-L reaction chamber, respectively. The secondary organic aerosol (SOA) formations from gas-phase reactions of anthracene with O3 and O3-NO were observed. Meanwhile, the size distributions and mass concentrations of SOA were monitored with a scanning mobility particle sizer (SMPS) during the formation processes. The rapid exponential growths of SOA reveal that the atmospheric lifetimes of gas-phase anthracene towards O3 and O3-NO are less than 20.5 and 4.34 hr, respectively. The particulate oxidation products from homogeneous and heterogeneous reactions were analyzed with a vacuum ultraviolet photoionization aerosol time-of-flight mass spectrometer (VUV-ATOFMS). Gas chromatograph/mass spectrometer (GC/MS) analyses of oxidation products of anthracene were carried out for assigning the time-of-flight (TOF) mass spectra of products from homogeneous and heterogeneous reactions. Anthrone, anthraquinone, 9,10- dihydroxyanthracene, and 1,9,10-trihydroxyanthracene were the ozonation products of anthracene, while anthrone, anthraquinone, 9-nitroanthracene, and 1,8-dihydroxyanthraquinone were the main products of anthracene with O3-NO.     

Waste oyster shell as a kind of active filler to treat the combined wastewater at an estuary

Estuaries have been described as one of the most difficult environments on Earth. It is difficult to know how to treat the combined wastewater in tidal rivers at the estuary, where the situation is very different from ordinary fresh water rivers. Waste oyster shell was used as the active filler in this study in a bio-contact oxidation tank to treat the combined wastewater at the Fengtang Tidal River. With a middle-experimental scale of 360 ma/day, the average removal efficiency of COD, BOD, NH3-N, TP and TSS was 80.05%, 85.02%, 86.59%, 50.58% and 85.32%, respectively, in this bio-contact oxidation process. The living microbes in the biofilms on the waste oyster shell in this bio-contact oxidation tank, which were mainly composed of zoogloea, protozoa and micro-metazoa species, revealed that waste oyster shell as the filler was suitable material for combined wastewater degradation. This treatment method using waste oyster shell as active filler was then applied in a mangrove demonstration area for water quality improvement near the experiment area, with a treatment volume of 5 × 10^3 m^3/day. Another project was also successfully applied in a constructed wetland, with a wastewater treatment volume of 1 ×10^3 m^3/day. This technology is therefore feasible and can easily be applied on a larger scale,     

超磁分离净化技术在矿井水井下处理站中的应用

分析了超磁分离净化技术的原理和特点,并将该技术在协庄煤矿井下矿井水处理站进行了工程化应用.结果表明:超磁分离水净化系统能在较短时间内完成微絮凝、固液分离过程,出水SS≤10 mg/L,SS去除率＞95％;该技术与其它混凝沉淀技术相比,具有占地面积小、处理效率高的优点,但也存在电能消耗较高和磁粉流失的缺点.该技术在煤矿井下矿井水预处理中应用,具有一定的优势.     

库水位响应滞后影响下的滑坡位移预测模型研究

滑坡的位移变化不仅与其地质环境有关,还取决于外界诱发因素的动态变化,如降雨和库水位变化。本文以白家包滑坡监测数据为依据,对滑坡诱发因素与滑坡位移变化之间的影响关系进行了综合分析,并选取月降雨量与库水响应滞后影响下的库水位月平均变化量为诱发因子,采用时间序列分析方法,通过构建差分自回归移动平均(ARIMA)模型,对该滑坡的位移进行了动态预测。结果表明:该模型可以较好地反映滑坡位移在外界诱发因素影响下的动态变化,可有效提高模型预测精度,且简单易行,为判断滑坡的动态变化提供了可靠的理论依据。     

储罐钢08MnNiVR和SPV490Q在石油沉积水中腐蚀性能对比

采用电化学试验、浸泡试验和慢应变速率拉伸试验研究储罐钢08MnNiVR和SPV490Q在石油沉积水中的腐蚀性能差异。电化学试验结果表明,08MnNiVR在石油沉积水中的自腐蚀电流比SPV490Q略大。浸泡试验结果表明,中短期试验时,08MnNiVR的腐蚀率略大;较长期试验时,SPV490Q的腐蚀率略大。慢应变速率拉伸试验结果表明,08MnNiVR和SPV490Q在石油沉积水中均具有高应力腐蚀抗力。     

冲压发动机C/SiC喷管承压失效研究

新型三维编织碳/碳化硅复合材料存在较强的各向异性,而各个方向的性能数据积累不足,复合材料的强度计算方法尚不完善,为了发现新型三维编织碳/碳化硅复合材料在冲压发动机喷管中应用可能遇到的问题,并找到相应地解决措施,开展了这种复合材料应用于冲压发动机喷管的承压强度计算和承压实验研究。对承压实验中出现的低压破坏情况进行了分析,分析了低压破裂的原因,提出了改进措施。分析结果表明:C/SiC喷管喉部密度较低,导致强度较低,承载能力下降,是首次强度验证实验过程中该局部破坏的原因;为提高喷管强度,需要通过其形状设计并控制沉积流场,保证其喉部的沉积密度达到1.9g/cm³以上。对改进后的喷管进行了实验验证,实验结果与计算结果基本一致,满足要求。因此,在实际应用中应对喷管喉部和纵向密度的分布进行工业CT无损检测,确保喷管密度的分布均匀。      

CALPUFF-AERMOD大气预测模式耦合系统

AERMOD和CALPUFF在模型应用尺度、适用范围、气象与地形预处理以及特殊计算功能模块等方面具有自身的特点和优势。为了使模型系统计算结果合理科学,本文综合考虑AERMOD和CALPUFF的应用范围和特点,建立了CALPUFF-AERMOD耦合系统。以广东省东莞、中山、深圳的污染源和气象条件等资料为背景,进行污染预测模拟,以此评价模式的模拟性能,并对比CALPUFF与AERMOD的预测结果,最终计算得出的预测结果相对科学合理。     

中国火山地区预警政策研究

本文主要介绍了我国的活火山、火山灾害情况及国内外的火山预警政策。在此基础上讨论了我国火山地区预警政策的组成结构,认为完整的火山地区预警政策应该包括活火山识别、火山风险评价与灾害区划图、制定火山应急预案、火山防灾减灾知识宣传、火山监测和灾害预报、火山灾害预警等级划分、火山减灾工程措施以及预警响应措施等方面,并对火山预警政...