Bioaccumulation and toxic effects of copper on growth and oxygen consumption by the postlarvae of Penaeus indicus

The aim of this study was to assess the toxic impact of copper on postlarvae (PL) of the penaeid shrimp Penaeus indicus. Tolerance, growth, oxygen consumption and metal accumulation were investigated in these PL on exposure to copper. Tolerance studies were conducted for 96 h to assess the tolerance limits of P. indicus PL exposed to different concentrations of copper using static renewal bioassay tests. Using the Probit method, the regression equation was calculated as Y=0.4899+2.3562 X, with a correlation coefficient of 0.9707. The 96 h LC₅₀ was 0.8204 ppm. The effect of sublethal (one-fifth of 96 h LC₅₀) copper on PL for short- and long-term exposures revealed a significant (p<0.05) decrease in the rate of oxygen consumption, metabolic rate, mean length, wet and dry weight of the exposed PL over their respective controls which can be attributed to a gradual and time-dependent accumulation of the metal, as noticed in the exposed PL through accumulation studies. Overall, the data suggest that on chronic exposure even sublethal concentrations of copper can reduce the metabolic rate and growth in P. indicus PL. This is perhaps the first attempt to use the wild P. indicus PL as a bioindicator of copper toxicity.     

Protein Metabolic Response to Carbon Tetrachloride in A Freshwater Fish,Sarotherodon Mossambicus

Exposure of a freshwater teleost, Sarotherodon mossambicus, to a sublethal concentration (26 ppm) of carbon tetrachloride for periods up to 30 days led to significant changes in the soluble protein fractions (albumin and globulins) and free amino acid content. the decrease in total protein content was greater in liver than in muscle. the protein loss was expected due to the impairement of protein synthetic activity during stress conditions.     

Wastewater management for hazardous chemicals ‐ disposal of ammonium perchlorate wastes from propellant production for space vehicles

An attempt to depict the wastewater treatment system for the production of ammonium perchlorate, a component of solid propellant used in space vehicles, has been made. The waste‐water management system uses solar ponds and seawater dilution for the retention and disposal of the undesirable constituents of the wastewater. The details of the wastewater generation and its treatment are highlighted in this paper.     

Rehabilitation of degraded community lands for sustainable development in Himalaya: a case study in Garhwal Himalaya,India

SUMMARY

An approach to the rehabilitation of degraded community lands built on people's perceptions and traditional knowledge was developed, implemented on a small scale (6 ha plot), and evaluated in terms of economic and ecological costs and benefits over a period of 5 years in a mid-altitude (1200 m) village of Garhwal Himalaya. Rehabilitation comprised establishment of water harvesting tanks, organic management of soil, agroforestry (native multipurpose trees t traditional crops), and decision making by the whole village community. Costs and benefits under irrigated and unirrigated conditions were compared. The total cost of establishing the irrigated agroforestry system was 1.23 fold that of the unirrigated one, whereas the total benefit was 2.09 fold. The average standing above-ground biomass of the 4-year-old plantation in the irrigated agroforestry system was 11.69 t/ha compared to 8.34 t/ha in the unirrigated system. Improvement in soil properties was more pronounced in the irrigated system than in the unirrigated one. Nutrient input, an input derived largely from forest biomass, in the unirrigated system was nearly 3 times higher than that in the irrigated system. It is concluded that, considering the local and national/regional/global interests in an integrated manner, agroforestry incorporating water management would be a more effective option for rehabilitating degraded community lands than the afforestation currently being attempted by the government in the mid-altitudes of Indian Himalaya.     

Hg bioavailability and impact on bacterial communities in a long-term polluted soil

Different soil samples characterised by a long-term Hg-pollution were studied for Hg total content, fractionation, phytotoxicity and influence on the bacterial community. Hg pollution ranged from 1 to 50 mg kg(-1) and most of it was speciated in scarcely soluble forms. In agreement with this, the biochemical quality indexes were investigated (biomass, enzyme activities) and the bacterial community (viable heterotrophic (VH) bacteria, functional diversity) apparently was not influenced by the degree of Hg pollution. In particular, the investigated soils exhibited a low percentage of Hg-resistant (Hg(R)) bacteria ranging from less than 0.001% to 0.25% of the VH and the addition of available Hg in the form of HgCl(2) induced an enrichment of resistant Hg(R) populations. The general biodiversity of the bacterial community was evaluated by denaturing gradient gel electrophoresis of DNA of Hg spiked soil microcosms and of control soils. Hg(R) bacteria capable to grow in a minimal medium containing HgCl(2) were also isolated and identified. MerA and merB gene PCR fragments were obtained from different Hg(R) strains and the range of similarities at the DNA level and at the deduced amino acid level showed that they carried mercuric reductase and lyase. Differently from bacteria, some influence of soil Hg content on seeds' germination and root elongation was observed for Lepidium sativum L. and Solanum lycopersicum L. In conclusion, most of the Hg in these long-term polluted soils was scarcely mobile and available and did not significantly influence the soil bacterial community. The risk of potential Hg remobilization over time, that could be naturally favoured by the activity of plant roots or other inorganic processes occurring in soil, can be extenuated since bacterial community was resistant and resilient to subsequent Hg stress.     

Isolation of Thiobacillus sp from aerobic sludge of distillery and dairy effluent treatment plants and its sulfide oxidation activity at different concentrations

In the present study two strains of Thiobacillus sp were isolated from aerobic sludge of distillery and dairy effluent treatment plant using standard methods of isolation and enrichment. Experiments were conducted using isolated cultures in batch bioreactor with initial sulfide concentration of 75 and 150 mg/l. The effect of initial sulfide concentration on the activity of isolated Thiobacillus sp was studied. Sulfide oxidizing capacity was also determined at different initial sulfide concentrations. The results from the study indicate the possible isolation of Thiobacillus cultures from native source and application in the full-scale reactor     

Bootstrap confidence intervals for adaptive cluster sampling design based on Horvitz–Thompson type estimators

Perez and Pontius (J Stat Comput Simul 76:755–764, 2006) introduced several bootstrap methods under adaptive cluster sampling using a Horvitz–Thompson type estimator. Using a simulation study, they showed that their proposed methods provide confidence intervals with highly understated coverage rates. In this article, we first show that their bootstrap methods provide biased bootstrap estimates. We then define two bootstrap methods, based on the method of Gross (Proceeding of the survey research methods section. American Statistical Association, Alexandria, VA, pp 181–184, 1980) and Bootstrap With Replacement, that provide unbiased bootstrap estimates of the population mean with bootstrap variances matching the corresponding unbiased variance estimator. Using a simulation study, we show that the bootstrap confidence intervals based on our proposed methods have better performance than those based on available bootstrap methods, in the sense of having coverage proportion closer to the nominal coverage level. We also compare the proposed intervals to empirical likelihood based intervals in small samples.     

Examination of model predictions at different horizontal grid resolutions

While fluctuations in meteorological and air quality variables occur on a continuum of spatial scales, the horizontal grid spacing of coupled meteorological and photochemical models sets a lower limit on the spatial scales that they can resolve. However, both computational costs and data requirements increase significantly with increasing grid resolution. Therefore, it is important to examine, for any given application, whether the expected benefit of increased grid resolution justifies the extra costs. In this study, we examine temperature and ozone observations and model predictions for three high ozone episodes that occurred over the northeastern United States during the summer of 1995. In the first set of simulations, the meteorological model RAMS4a was run with three two-way nested grids of 108/36/12 km grid spacing covering the United States and the photochemical model UAM-V was run with two grids of 36/12 km grid spacing covering the eastern United States. In the second set of simulations, RAMS4a was run with four two-way nested grids of 108/36/12/4 km grid spacing and UAM-V was run with three grids of 36/12/4 km grid spacing with the finest resolution covering the northeastern United States. Our analysis focuses on the comparison of model predictions for the finest grid domain of the simulations, namely, the region overlapping the 12 km and 4 km domains. A comparison of 12 km versus 4 km fields shows that the increased grid resolution leads to finer texture in the model predictions; however, comparisons of model predictions with observations do not reveal the expected improvement in the predictions. While high-resolution modeling has scientific merit and potential uses, the currently available monitoring networks, in conjunction with the scarceness of highly resolved spatial input data and the limitations of model formulation, do not allow confirmation of the expected superiority of the high-resolution model predictions.The U.S. Governments right to retain a non-exclusive royalty-free licence in and to any copyright is acknowledged.     

Physico-Chemical Quality of Drinking Water in Rohtas District of Bihar

Water Quality Survey of Rohtas district of Bihar was conducted. Samples were collected from differentsources and analysed. 209 samples were collectedfrom 196 villages. Results of water quality surveyidentified the problem areas in respect of high iron,manganese, fluoride, nitrate and brackishness of water in the district.     

Measurement of particulate phase polycyclic aromatic hydrocarbon (PAHs) around a petroleum refinery

A study on concentrations of ambient particulates viz. total suspended particulate matters (TSP), respirable suspended particulate matter (RSPM) and polycyclic aromatic hydrocarbons (PAH) were carried out at six sites around the Asia’s largest, 12 MMTPA, petroleum refinery in west coast of India. PAH concentrations are correlated with each other in these sites, suggesting that they have related sources and sinks. The present article discusses the monitoring aspects such as sample collection, pretreatment and analytical methods and compares the monitored levels for assessing the source receptor distribution pattern. The main sources of RSPM and PAHs in urban air are automobile exhaust (CPCB, Polycyclic aromatic hydrocarbons (PAHs) in air and their effects on human health. “”, 2003; Manuel et al., Environmental Science and Technology, 13: 227–231, 2004) and industrial emissions like petroleum refinery (Vo-Dinh, Chemical analysis of polycyclic aromatic hydrocarbons, Wiley: New York, 1989; Wagrowaski and Hites, Environmental Science and Technology, 31: 279–282, 1997). Polycyclic aromatic hydrocarbons (PAH) are ubiquitous constituents of urban airborne particulate mostly generated by anthropogenic activities (Li et al., Environmental Science and Technology, 37:1958–2965, 2003; Thorsen et al., Environmental Science and Technology, 38: 2029–2037, 2004; Ohura et al., Environmental Science and Technology, 32: 450–455, 2004) and some of them are of major health concern mainly due to their well-known carcinogenic and mutagenic properties (Soclo et al., Marine Pollution Bulletin, 40: 387–396, 2000; Chen et al., Environment International, 28: 659–668, 2003; Larsen and Baker, Environmental Science and Technology, 32: 450–455, 2003). Limited information is available on PAHs contributions from refineries to ambient air. Hence this study would not only create a database but also provide necessary inputs towards dose-response relationship for fixing standards. Also, since it acts as precursor to green house gas, the data would be useful for climate change assessments. The objective of this article is to find out the concentration of PAHs in particulate matter around petroleum refinery and compare with their concentrations in major Indian urban centers.