Evaluating the performance of a turbulent wet scrubber for scrubbing particulate matter

A turbulent wet scrubber was designed and developed to scrub particulate matter (PM) at micrometer and submicrometer levels from the effluent gas stream of an industrial coal furnace. Experiments were conducted to estimate the particle removal efficiency of the turbulent scrubber with different gas flow rates and liquid heads above the nozzle. Particles larger than 1 µm were removed very efficiently, at nearly 100%, depending upon the flow rate, the concentration of the dust-laden air stream, and the water level in the reservoir. Particles smaller than 1 µm were also removed to a greater extent at higher gas flow rates and for greater liquid heads. Pressure-drop studies were also carried out to estimate the energy consumed by the scrubber for the entire range of particle sizes distributed in the carrier gas. A maximum pressure drop of 217 mm H₂O was observed for a liquid head of 36 cm and a gas flow rate of 7 m³/min. The number of transfer units (NTU) analysis for the efficiencies achieved by the turbulent scrubber over the range of particles also reveals that the contacting power achieved by the scrubber is better except for smaller particles. The turbulent scrubber is more competent for scrubbing particulate matter, in particular PM_2.5, than other higher energy or conventional scrubbers, and is comparable to other wet scrubbers of its kind for the amount of energy spent.

Implications: The evaluation of the turbulent scrubber is done to add a novel scrubber in the list of wet scrubbers for industrial applications, yet simple in design, easy to operate, with better compactness, and with high efficiencies at lower energy consumption. Hence the turbulent scrubber can be used to combat particulate from industrial gaseous effluents and also has a scope to absorb gaseous pollutants if the gases are soluble in the medium used for particles capture.     

Effective application of ethanol in diesel engines

This work aimed to prove the effects of adding different proportions of ethanol with diesel (DE) and ethanol–water mixture with diesel (DEW) in a single-cylinder diesel engine on the performance, emissions, and combustion parameters. The blends were stabilized by tetra methyl ammonium bromide (TMAB) as the additive. The study was conducted at two operating conditions initially on a normal diesel engine and in the second case the engine piston, valves, and cylinder head coated with zirconia (ZrO₂) alumina (Al₂O₃). The results showed that the addition of 10% ethanol with diesel performed almost equivalent to neat diesel with 29.2% BTE and a 17.7% decrease in smoke and an 11.4% increase in NOx emission at peak load compared to that of the base fuel. Modified engines with thermal barrier coating (TBC) performed superior to normal engines with 4% and 5.5% increase in BTE, respectively, for DE- and DEW-type fuels with reduced exhaust emissions. A 5% addition of water with diesel–ethanol blends favors a higher proportion of ethanol to be employed in diesel engines.     

Seasonal variability and source apportionment of metals in the atmospheric deposition in Belgrade

The primary objective of this study is to assess anthropogenic impacts on the environment by determination of element atmospheric depositions. Bulk depositions were collected monthly, from June 2002 to December 2006, at three urban locations in Belgrade. Concentrations of Al, V, Cr, Mn, Fe, Ni, Cu, Zn, Cd and Pb were analyzed by atomic absorption spectrometry and the current deposition fluxes of atmospheric metals were established. Fourier analysis was applied in order to investigate seasonal variation of the monthly data set. Nickel, V, Fe and Al showed pronounced seasonal dependence, while seasonal variation of the other elements was not evident. The enrichment factors of Pb, Zn, Cd and Cu were obviously above those who could have been caused by natural processes, indicating a mainly anthropogenic origin. Nickel was intermediately enriched suggesting participation of both natural and anthropogenic sources. The multivariate receptor model, Unmix, was used to analyze a 5-yr element atmospheric depositions data set. Three main source profiles (mixed road dust, oil combustion and metal processing) were identified and the overall average percentage source contributions determined.     

Moisture Sorption Characteristics of Chitosan/Polyethylene Oxide Blended Films

Studies on the moisture sorption characteristics of chitosan/polyethylene oxide (PEO) blended films have been carried out at 27 °C for water activity (a _w) from 0.1 to 0.9. The sorption data at different a _w were used to fit 12 different sorption isotherm models proposed in the literature. The model constants were determined by linear fitting of the sorption equations. The ranges of applicability of water activity for the isotherms reported in the article lie between 0.11 to 0.44 (monomolecular layer) for the BET model and between 0.11 to 0.86 (monolayer & multilayer’s) for Smith, Caurie, Bradley and Oswin. The water activity for Halsey and Chung & Pfost models lies between 0.44 to 0.86 (multilayer) and 0.33 to 0.86 for Henderson and Freundlich models and 0.11 to 0.65 for Kuhn, Linear and Iglesias & Chirife models. The high coefficient of determination R ² (ranges from 0.82 to 1) confirms the applicability of the equations employed. The study on the application of such water activity data of chitosan/PEO blended films on different model equations will be helpful in prediction of durability and functional behavior of moisture sensitive biopolymeric films     

Eco-sanitation and its benefits: an experimental demonstration program to raise awareness in central Nepal

This study focuses on awareness and an experimental demonstration about the use of human urine and wood ash as a fertilizer. This study was conducted in Chanauta, central Nepal, from November 2009 to February 2010. The villagers (N = 27) were asked about their awareness of eco-sanitation and fertilizer value of urine and ash. All the participants agreed that the use of urine and ash was a good idea. In the experimental study, the fertilizer value of urine+ash was compared with animal manure and no-fertilizer in the cultivation of radish, potato, broadleaf mustard, cauliflower, and cabbage. Different plants cultivated plots received 54–81 kgN/ha with urine+ash or manure fertilizer. The urine+ash fertilizer produced significantly (p < 0.05) higher broadleaf mustard biomass than obtained from animal manure and without fertilization. Urine+ash-fertilized plots growing radish, potato, cauliflower, and cabbage produced similar or slightly higher yields biomass compared to those achieved with manure fertilization. This might be because of high P, K as well as greater availability of N in applied urine compared to manure. It is concluded that urine+ash fertilizer can be used instead of animal manure; in this study, a dose of 4 L of urine was equal to 1 kg of dry cattle manure and produced a similar or greater yield of vegetable biomass than manure fertilization. To be able to generalize this conclusion, it is important to conduct these kinds of experiments with different seasonal crops and in other parts of the world.     

Assessment of spatial-temporal patterns of surface and ground water qualities and factors influencing management strategy of groundwater system in an urban river corridor of Nepal

This study examined the spatial-temporal variations and factors influencing the management of groundwater along a section of the Bagmati river corridor in the Kathmandu valley (Nepal). The results showed that rural areas were less polluted than urban areas. In urban areas, the biochemical oxygen demand (BOD), total nitrogen (TN) and total phosphorus (TP) concentrations ranged from 8.41 to 29.74 mg/L, 6.7 to 128.96 mg/L and 0.06 to 1.5 mg/L, respectively. In rural areas, the BOD, TN and TP concentrations ranged from 0.78 to 18.25 mg/L, 4.8 to 11.56 mg/L and 0.07 to 0.65 mg/L, respectively. The level of organics was higher in the pre-monsoon season, while the level of nutrients was higher in post-monsoon season. A comparison of the groundwater and surface water in the upstream rural areas revealed that the TP concentration was higher in the groundwater than in the surface water, which was attributed to the sorption of phosphorus on iron, aluminum or calcium compounds contained in the surface water, which depends upon the temperature, pH and dissolved oxygen. In urban areas, a few wells were found at groundwater levels lower than the corresponding surface water levels and were subjected to a high risk of pollution. Overall, these findings reinforce the notion that the management of surface and ground waters in an integrated approach is essential for attaining sustainable development of groundwater systems.     

Effect of amendments on the extractability, retention and plant uptake of metals on a sewage-irrigated soil

Laboratory and greenhouse experiments were conducted to evaluate the effects of farmyard manure (FYM), CaCO(3) and single superphosphate (SSP) on retention and availability of Zn, Cu and Ni in sewage-irrigated soil. We also assessed the suitability of 0.05M EDTA for predicting the effectiveness of these amendments in reducing the phytoavailability of metals. Results indicated that EDTA could successfully predict the phytoavailability of Zn and Ni in amended soil, whereas it failed in case of Cu. By and large, application of CaCO(3), either alone or in combination with FYM had a positive effect on the retention of Zn, Cu and Ni in soil. Application of CaCO(3) alone or in combination with FYM was equally effective in reducing the Zn content in lettuce, whereas sole application of CaCO(3) significantly reduced Ni content. However, only SSP was found to be effective in reducing the Cu content in lettuce.     

Risk of flood-related mortality in Nepal

In July 1993, severe flooding devastated Sarlahi district in Nepal. The next month, a follow-up study of a large population cohort was undertaken. The study is unique in that a prospective research database was used to verify residency prior to the flood and to confirm vital status afterwards. It evaluated 41,501 children aged between two and nine years and adults aged 15-70 in 7,252 households. Flood-related fatality rates were 13.3 per 1,000 for girls and 9.4 per 1,000 for boys, 6.1 per 1,000 for women and 4.1 per 1,000 for men. Flood-related fatality rates for children were six times higher than mortality rates in the same villages a year before the flood (relative risk (RR) = 5.9, 95 per cent confidence interval (CI) 5.0-6.8). Flood-related fatality was associated with low socio-economic status preflood (RR = 6.4, 95 per cent CI 2.7-20.0), and having a house constructed of thatch (RR = 5.1, 95 per cent CI 1.7-24.5).     

Recent innovation in clean conversion technologies,carbon capture and utilization,advance treatment for energy,air, water,biomass and soil for green and sustainable development 2021 (ICheEC 2021)

Environmental Science and Pollution Research -