Further studies on the uptake of persistent organic pollutants (POPs) by polyurethane foam disk passive air samplers

Passive air samplers (PAS) can be used to monitor semi-volatile organic compounds in the atmosphere. Polyurethane foam (PUF) disks are a popular sampling medium because they have a high retention capacity for such compounds. This paper reports a highly time-resolved uptake study, to derive uptake rate data under field conditions, and investigate the effects of using different foam densities on the uptake rate. PUF disks were deployed alongside an active sampler, for periods of up to 12 weeks. The uptake rates were measured for a range of gas- and particle-bound persistent organic pollutants (polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs)), of different properties, to explore whether gas–particle partitioning affected uptake rate. Uptake rates for two different densities of foam (0.021 and 0.035 g cm^?3) were not statistically significantly different from each other. Uptake rates of light PCBs averaged ～6.5 m³ day^?1, somewhat higher than in previous studies; higher wind speeds and lower temperatures in this study are the likely reason for this difference. The study showed: i) the uptake rate of the compound with lowest K_OA considered in this study (PCB-28/31) declined in the later weeks, indicating an approach to equilibrium; ii) uptake rates of lighter BDEs and heavier PCBs (compounds of intermediate K_OA in this study) remain similar throughout the study period, indicating that they are not approaching equilibrium during the 12-week-study; iii) uptake rates were typically: ～8 m³ day^?1 for PCB-52; ～9.5 m³ day^?1 for PCB-95; ～11 m³ day^?1 for BDE-28 and ～2 m³ day^?1 BDE-99. The latter compound has an important particle-bound component and this lowers the sampling rate compared to predicted uptake rates for compounds which are in the gas phase only. It is shown that knowledge of gas–particle partitioning is needed to correct for this effect, and to improve predicted uptake rates.     

Atmospheric nitrogen deposition in south-east Scotland: Quantification of the organic nitrogen fraction in wet,dry and bulk deposition

Water soluble organic nitrogen (WSON) compounds are ubiquitous in precipitation and in the planetary boundary layer, and therefore are a potential source of bioavailable reactive nitrogen. This paper examines weekly rain data over a period of 22 months from June 2005 to March 2007 collected in 2 types of rain collector (bulk deposition and “dry + wet” deposition) located in a semi-rural area 15 km southwest of Edinburgh, UK (N55°51′44″, W3°12′19″). Bulk deposition collectors are denoted in this paper as “standard rain gauges”, and they are the design used in the UK national network for monitoring precipitation composition. “Dry + wet” deposition collectors are flushing rain gauges and they are equipped with a rain detector (conductivity array), a spray nozzle, a 2-way valve and two independent bottles to collect funnel washings (dry deposition) and true wet deposition. On average, for the 27 weekly samples with 3 valid replicates for the 2 types of collectors, dissolved organic nitrogen (DON) represented 23% of the total dissolved nitrogen (TDN) in bulk deposition. Dry deposition of particles and gas on the funnel surface, rather than rain, contributed over half of all N-containing species (inorganic and organic). Some discrepancies were found between bulk rain gauges and flushing rain gauges, for deposition of both TDN and DON, suggesting biological conversion and loss of inorganic N in the flushing samplers.     

The stable carbon isotope composition of PM2.5 and PM10 in Mexico City Metropolitan Area air

The sources and distribution of carbon in ambient suspended particles (PM_2.5 and PM₁₀) of Mexico City Metropolitan Area (MCMA) air were traced using stable carbon isotopes (¹³C/¹²C). Tested potential sources included rural and agricultural soils, gasoline and diesel, liquefied-petroleum gas, volcanic ash, and street dust. The complete combustion of LP gas, diesel and gasoline yielded the lightest δ¹³C values (?27 to ?29‰ vs. PDB), while street dust (PM₁₀) represented the isotopically heaviest endmember (?17‰). The δ¹³C values of rural soils from four geographically separated sites were similar (?20.7 ± 1.5‰). δ¹³C values of particles and soot from diesel and gasoline vehicle emissions and agricultural soils varied between ?23 and ?26‰. Ambient PM samples collected in November of 2000, and March and December of 2001 at three representative receptor sites of industrial, commercial and residential activities had a δ¹³C value centered around ?25.1‰ in both fractions, resulting from common carbon sources. The predominant carbon sources to MCMA atmospheric particles were hydrocarbon combustion (diesel and/or gasoline) and particles of geological origin. The significantly depleted δ¹³C values from the industrial site reflect the input of diesel combustion by mobile and point source emissions. Based on stable carbon isotope mass balance, the carbon contribution of geological sources at the commercial and residential sites was approximately 73% for the PM₁₀ fraction and 54% for PM_2.5. Although not measured in this study, biomass-burning emissions from nearby forests are an important carbon source characterized by isotopically lighter values (?29‰), and can become a significant contributor (67%) of particulate carbon to MCMA air under the prevalence of southwesterly winds. Alternative sources of these ¹³C-depleted particles, such as cooking fires and municipal waste incineration, need to be assessed. Results show that stable carbon isotope measurements are useful for distinguishing between some carbon sources in suspended particles to MCMA air, and that wind direction has an impact on the distribution of carbon sources in this basin.     

High time-resolved measurements of organic air toxics in different source regimes

High time-resolved (HTR) measurements can provide significant insight into sources and exposures of air pollution. In this study, an automated instrument was developed and deployed to measure hourly concentrations of 18 gas-phase organic air toxics and 6 volatile organic compounds (VOCs) at three sites in and around Pittsburgh, Pennsylvania. The sites represent different source regimes: a site with substantial mobile-source emissions; a residential site adjacent to a heavily industrialized zone; and an urban background site. Despite the close proximity of the sites (less than 13 km apart), the temporal characteristic of outdoor concentrations varied widely. Most of the compounds measured were characterized by short periods of elevated concentrations or plume events, but the duration, magnitude and composition of these events varied from site to site. The HTR data underscored the strong role of emissions from local sources on exposure to most air toxics. Plume events contributed more than 50% of the study average concentrations for all pollutants except chloroform, 1,2-dichloroethane, and carbon tetrachloride. Wind directional dependence of air toxic concentrations revealed that emissions from large industrial facilities affected concentrations at all of the sites. Diurnal patterns and weekend/weekday variations indicated the effects of the mixing layer, point source emissions patterns, and mobile source air toxics (MSATs) on concentrations. Concentrations of many air toxics were temporally correlated, especially MSATs, indicating that they are likely co-emitted. It was also shown that correlations of the HTR data were greater than lower time resolution data (24-h measurements). This difference was most pronounced for the chlorinated pollutants. The stronger correlations in HTR measurements underscore their value for source apportionment studies.     

Vegetation and outdoor recess time at elementary schools: What are the connections?

Empirical and anecdotal evidence suggests that landscapes with more vegetation have a positive impact on children's focus, attention, and cognitive development. In school, children are able to regain focus, suppress impulses, and pay attention in class longer after exposure to natural settings. Because children spend much of their time in school, the amount and types of vegetation on school grounds may influence their development. Public elementary schools in the Commonwealth of Virginia (N = 988) were surveyed to examine correlations between school ground vegetation and outside recess. The number of trees on school grounds, the size of the school grounds, and the presence of sports fields were modestly correlated with greater outside recess time. These correlations support common sense because sports fields facilitate supervised play and larger school grounds provide space for sports fields and playgrounds and additional opportunities for free play. More trees on school grounds provide a welcoming environment for students and teachers, and encourage outside play. These results may help school personnel design and maintain school grounds that increase outdoor recess time.     

How organizational motives and communications affect public trust in organizations: The case of carbon dioxide capture and storage

Preventing climate change is among the greatest environmental challenges facing the world today. Recently developed carbon dioxide capture and storage (CCS) technology is an important strategy to mitigate climate change. Public trust in organizations involved in CCS technology is important for successful implementation of this technology. This work adresses how inferred organizational motives and organizational communications affect public trust in these organizations. Study 1 (N = 264) showed that Dutch citizens generally have less trust in the industrial organizations than in the environmental NGOs involved in CCS. As predicted, inferred organizational motives (organization-serving motives versus public-serving motives) accounted for this difference. In Study 2 (N = 78) and Study 3 (N = 51) we used experimental designs. Both experiments showed that organizations that communicated arguments incongruent with inferred organizational motives instigated less trust than organizations that communicated arguments congruent with inferred organizational motives. Study 3 additionally showed that communicating an incongruent and a congruent argument together diminished the negative effects of the incongruent argument. In both Study 2 and Study 3 the effect of congruency on trust was mediated by perceived honesty of the organizations.     

Challenges to liberalism: The case of Australian energy policy

This paper considers liberal and nationalist economic policy approaches to the ownership and development of Australian energy resources (oil, gas, coal and uranium). In the two decades prior to 1983, Australia pursued economic policies in relation to its energy resources which could broadly be described as ‘nationalist’. Governments of the day intervened in development decisions in an effort to enhance the ‘national interest’. From 1983, along with the deregulation of the Australian economy as a whole, policy relating to energy resources was liberalised. Development of energy reserves henceforth occurred according to the dictates of the market. This paper argues that recent Australian energy policy initiatives reflect an increase in nationalist influences and a retreat from the liberalisation agenda that dominated energy policy making in the 1980s and 1990s. Three examples are discussed where policy has been influenced by a nationalist framework: (1) the domestic gas reservation policy in Western Australia; (2) Australian government efforts to promote a ‘value adding’ nuclear processing industry and (3) Australian Labor Party policy giving preferential financial incentives for gas to liquids projects. The re-emergence of nationalism in Australia is occurring either because policy makers now favour it as a path to energy security or in some cases because they believe that appeals to nationalism will generate political support.     

Efficiency of perchlorate consumption in road flares, propellants and explosives

When an explosive detonates or a propellant or flare burns, consumption of the energetic filler should be complete but rarely is, especially in the presence of large amounts of non-combustible materials. Herein we examine three types of perchlorate-containing devices to estimate their potential as sources of contamination in their normal mode of functioning. Road flares, rocket propellants and ammonium nitrate (AN) emulsion explosives are potentially significant anthropogenic sources of perchlorate contamination. This laboratory evaluated perchlorate residue from burning of flares and propellants as well as detonations of ammonium nitrate emulsion explosives. Residual perchlorate in commercial products ranged from 0.094 mg perchlorate per gram material (flares) to 0.012 mg perchlorate per gram material (AN emulsion explosives). The rocket propellant formulations, prepared in this laboratory, generated 0.014 mg of perchlorate residue per gram of material.     

Virtues of simple hydro-economic optimization: Baja California, Mexico

This paper uses simple hydro-economic optimization to investigate a wide range of regional water system management options for northern Baja California, Mexico. Hydro-economic optimization models, even with parsimonious model formulations, enable investigation of promising water management portfolios for supplying water to agricultural, environmental and urban users. CALVIN, a generalized hydro-economic model, is used in a case study of Baja California. This drought-prone region faces significant challenges to supply water to agriculture and its fast growing border cities. Water management portfolios include water markets, wastewater reuse, seawater desalination and infrastructure expansions. Water markets provide the flexibility to meet future urban demands; however conveyance capacity limits their use. Wastewater reuse and conveyance expansions are economically promising. At current costs desalination is currently uneconomical for Baja California compared to other alternatives. Even simple hydro-economic models suggest ways to increase efficiency of water management in water scarce areas, and provide an economic basis for evaluating long-term water management solutions.     

Limitations of an optimum sustainable population or potential biological removal approach for conserving marine mammals: Pacific walrus case study

Decision rules are the agreed-upon points at which specific management interventions are initiated. For marine mammal management under the U.S. Marine Mammal Protection Act (MMPA), decision rules are usually based on either a numeric population or biological-removal approach. However, for walrus and other ice-associated pinnipeds, the inability to reliably assess population numbers or biological removals highlights a significant gap in the MMPA, particularly when the Arctic environment is rapidly changing. We describe the MMPA's ecosystem-based management goals, and why managers have bypassed these goals in favor of an approach that depends upon numerical population assessment. We then revisit the statute's primary goals in light of current knowledge about the Pacific walrus ecosystem and new developments in environmental governance. We argue that to monitor and respond to changes in the walrus ecosystem, decision rules should be based on scientific criteria that depend less on the currently-impractical goal of accurately enumerating population size and trends, or removals from that population. Rather, managers should base decisions on ecological needs and observed ecological changes. To implement this approach would require an amendment to the MMPA that supports filling the gap in management with achievable decision rules. Alternatively, walrus and other ice-associated pinnipeds will remain largely unmanaged during a period of profound environmental change.