Effect of operational factors on bioregeneration of binary phenol and 4-chlorophenol-loaded granular activated carbon using PVA-immobilized biomass cryogels

The effects of dry biomass density in cryogel beads, shaking speed and initial concentration ratio of phenol to 4-chlorophenol (4-CP) on the bioregeneration efficiencies of binary phenol and 4-CP-loaded granular activated carbon (GAC) for phenol and 4-CP, respectively, were investigated under the simultaneous adsorption and biodegradation approach. The results revealed higher bioregeneration efficiencies of binary-loaded GAC for phenol and 4-CP at higher dry biomass density but moderate shaking speed. The optimum dry biomass density in cryogel beads and shaking speed for use in bioregeneration were found to be 0.01 g/mL and 250 rpm, respectively. With respect to the initial phenol to 4-CP concentration ratio, the bioregeneration efficiencies were lower under increasing phenol and 4-CP initial concentrations, respectively, with the effect being more conspicuous under increasing 4-CP concentration. Higher bioregeneration efficiencies were achieved with the use of immobilized rather than suspended biomasses.     

Small habitat matrix: How does it work?

We present herein our perspective of a novel Small Habitats Matrix (SHM) concept showing how small habitats on private lands are untapped but can be valuable for mitigating ecological degradation. Grounded by the realities in Sabah, Malaysian Borneo, we model a discontinuous “stepping stones” linkage that includes both terrestrial and aquatic habitats to illustrate exactly how the SHM can be deployed. Taken together, the SHM is expected to optimize the meta-population vitality in monoculture landscapes for aerial, arboreal, terrestrial and aquatic wildlife communities. We also provide the tangible cost estimates and discuss how such a concept is both economically affordable and plausible to complement global conservation initiatives. By proposing a practical approach to conservation in the rapidly developing tropics, we present a perspective from “ground zero” that reaches out to fellow scientists, funders, activists and pro-environmental land owners who often ask, “What more can we do?”     

Measurement and relationship between critical tube diameter and critical energy for direct blast initiation of gaseous detonations

For the explosion safety assessment in industrial setting, detonation dynamic parameters provide important information on the sensitivity and conditions whereby detonations can be favorably occurred. In this study, new measurement of the critical tube diameter and the critical energy for direct initiation of a detonation is reported for a number of hydrocarbon–oxygen mixtures. The simultaneous experimental measurement carried out in this work allows the investigation of the direct scaling between these two dynamic parameter quantities of gaseous detonations. Using the new set of data, this paper also assesses the validity of an existing semi-empirical initiation model, namely, the surface energy model by Lee, and a simplified work done model. Both phenomenological models provide a general relationship between the two dynamic detonation parameters and comparison shows a good agreement between the theoretical results and the experimental measurement. The scaling of critical tube diameter with detonation cell size in this study also confirms the results in the previous literature.     

Non-hazardous waste generation characteristics and recycling practices in Saskatchewan and Manitoba,Canada

The paper presents the results on the analysis of non-hazardous waste generation characteristics and recycling practices in Saskatchewan (SK) and Manitoba (MB) using the biennial waste reports published by Statistic Canada. The objectives are to examine the waste generation rates from both residential and non-residential sources from 1998 to 2010, and to evaluate the effectiveness of their recycling programs and regulations. In spite of the many similarities between the provinces, MB on average generated 17.5 % more residential waste than SK, and about 15 % less non-residential waste than SK during the study period. It appears that MB waste generation characteristics were very different from SK and the rest of Canada. The amount of MSW generation in MB was, to a certain degree, independent from the economic factors. Assuming status quos conditions, the linear models predicted that the per capita MSW generations in MB would be about 33 % lower than SK in 2020. Data from this study suggest that (1) curbside recycling programs and (2) pay-as-you-throw collection systems may be important factors for increasing diversion rate in SK. It is also found that the non-residential waste generation in Canada was substantially larger than the residential waste generation during the 13-year period.     

Impact of undissociated volatile fatty acids on acidogenesis in a two-phase anaerobic system

This study investigated the degradation and production of volatile fatty acids(VFAs)in the acidogenic phase reactor of a two-phase anaerobic system.20 mmol/L bromoethanesulfonic acid(BESA)was used to inhibit acidogenic methanogens(which were present in the acidogenic phase reactor)from degrading VFAs.The impact of undissociated volatile fatty acids(un VFAs)on"net"VFAs production in the acidogenic phase reactor was then evaluated,with the exclusion of concurrent VFAs degradation."Net"VFAs production from glucose degradation was partially inhibited at high un VFAs concentrations,with 59%,37% and 60% reduction in production rates at 2190 mg chemical oxygen demand(COD)/L undissociated acetic acid(un HAc),2130 mg COD/L undissociated propionic acid(un HPr)and 2280 mg COD/L undissociated n-butyric acid(un HBu),respectively.The profile of VFAs produced further indicated that while an un VFA can primarily affect its own formation,there were also un VFAs that affected the formation of other VFAs.     

Nitrous oxide emission by denitrifying phosphorus removal culture using polyhydroxyalkanoates as carbon source

Nitrous oxide (N₂O) emission has been reported to be enhanced during denitrification when internally-stored compounds are used as carbon sources. However, negligible N₂O emissions have been detected in the few studies where polyhydroxyalkanoates (PHA) were specifically used. This study investigated and compared the potential enhancement of N₂O production, based on utilization of an internally-stored polymer and external carbon (acetate) by a denitrifying phosphorus removal culture. Results indicated that at relatively low chemical oxygen demand-to-nitrogen (COD/N) ratios, more nitrite was reduced to N₂O in the presence of an external carbon source as compared to an internal carbon source (PHA). At relatively higher COD/N ratios, similar N₂O reduction rates were obtained in all cases regardless of the type of carbon source available. N₂O reduction rates were, however, generally higher in the presence of an internal carbon source. Results from the study imply that when the presence of an external carbon source is not sufficient to support denitrification, it is likely competitively utilized by different metabolic pathways of denitrifying polyphosphate accumulating organisms (DPAOs) and other ordinary denitrifiers. This study also reveals that the consumption of PHA is potentially the rate-limiting step for N₂O reduction during denitrification.     

Determination of effects of turbulence flow in a cathode environment on electricity generation using a tidal mud-based cylindrical-type sediment microbial fuel cell

We examined the possibility of harvesting electricity from the surface of a tidal mud flat using a cylindrical-type sediment microbial fuel cell (SMFC), a marine mud battery (MMB), which can be applied in a sea environment where the ebb and flow occur due to tidal difference. In addition, we indirectly investigated the influence of ebb and flow in a lab, using aeration, argon gassing, and by agitating the cathodic solution. The MMBs consisted of cylindrical acrylic compartments containing a nylon membrane, an anode, and a cathode in a single body. The MMBs were stuck vertically into an artificial tidal mud flat such that the anode electrode was in direct contact with the tidal mud surface. As a result, the maximum current and power density generated were 35 mA/m² and 9 mW/m², respectively, thus verifying that it is possible to harvest electricity from the surface of a tidal mud flat using an MMB without burying the anode electrode in the tidal mud. Furthermore, the results of tests using an artificial turbulence flow showed the flow induced by the tidal ebb and flow could allow the performance of MMBs to be enhanced.     

Fines migration from soil daily covers in Hong Kong landfills

Laboratory tests using 240 mm diameter columns were conducted to study fines migration in conditions that simulate daily soil covers in Hong Kong municipal solid waste landfills. Five factors suspected to affect fines migration were examined: moisture content at soil compaction, overburden pressure, pumping rate, cover thickness, and soil-waste interface condition. The results show that moisture content at compaction, cover thickness, and soil-waste interface are the most influential parameters on fines migration in completely decomposed granite daily covers. The measured equivalent sizes of migratory fines from the soil covers were in the range of 4–140 μm. The majority of migratory fines migrated during first permeations, representing 64–86% of the total by mass. Larger particles tended to migrate from the soil mass during the saturation process. In a typical run, about 0.0018% of the total cover soil (by dry weight) was washed out during a typical 1 h rainfall event. The results of the laboratory studies point to important engineering implications on the operation of local MSW landfills regarding the use of sandy daily covers.     

Simultaneous removal of Congo red and cadmium(II) from aqueous solutions using graphene oxide–silica composite as a multifunctional adsorbent

Graphene oxide is a very high capacity adsorbent due to its functional groups and π?π interactions with other compounds. Adsorption capacity of graphene oxide, however, can be further enhanced by having synergistic effects through the use of mixed-matrix composite. In this study, silica-decorated graphene oxide (SGO) was used as a high-efficiency adsorbent to remove Congo red (CR) and Cadmium (II) from aqueous solutions. The effects of solution initial concentration (20 to 120 mg/l), solution pH (pH 2 to 7), adsorption duration (0 to 140 min) and temperature (298 to 323 K) were measured in order to optimize the adsorption conditions using the SGO adsorbent. Morphological analysis indicated that the silica nanoparticles could be dispersed uniformly on the graphene oxide surfaces. The maximum capacities of adsorbent for effective removal of Cd (II) and CR were 43.45 and 333.33 mg/g based on Freundlich and Langmuir isotherms, respectively. Langmuir and Freundlich isotherms displayed the highest values of Q_max for CR and Cd (II) adsorption in this study, which indicated monolayer adsorption of CR and multilayer adsorption of Cd (II) onto the SGO, respectively. Thermodynamic study showed that the enthalpy (ΔH) and Gibbs free energy(ΔG) values of the adsorption process for both pollutants were negative, suggesting that the process was spontaneous and exothermic in nature. This study showed active sites of SGO (π-π, hydroxyl, carboxyl, ketone, silane-based functional groups) contributed to an enormous enhancement in simultaneous removal of CR and Cd (II) from an aqueous solution, Therefore, SGO can be considered as a promising adsorbent for future water pollution control and removal of hazardous materials from aqueous solutions.