Primary biosorption mechanism of lead (II) and cadmium (II) cations from aqueous solution by pomelo (Citrus maxima) fruit peels

Environmental Science and Pollution Research - The present work investigates the primary adsorption mechanisms of lead (II) and cadmium (II) cations onto pomelo fruit peel (PFP) from aqueous...     

Simulating the spatial distribution of pollutant loads from pig farming using an agent-based modeling approach

Environmental Science and Pollution Research - This research developed an agent-based model (ABM) for simulating pollutant loads from pig farming. The behavior of farmer agents was captured using...     

Comparing earthquake insurance programmes: how would Japan and California have fared after the 2010–11 earthquakes in New Zealand?

Earthquakes are insured in high-risk high-income countries only if the public sector is involved. Prototypical examples are the insurance schemes in California (United States), Japan, and New Zealand, but each is structured differently. This paper examines these variations using a concrete case study: the sequence of earthquakes in Christchurch, New Zealand, in 2010–11—the most heavily insured seismic event in history. It assesses what would have been the outcome had the Christchurch insurance system been different, focusing on the California Earthquake Authority (CEA) programme and Japan Earthquake Reinsurance (JER). Overall, the aggregate cost of the earthquake to the New Zealand public insurer (Earthquake Commission) was USD 6.2 billion. If a similar-sized disaster had occurred in Japan and California, homeowners would have received around USD 1.6 billion and USD 0.7 billion, respectively. This paper describes the distributive and spatial patterns of these scenarios and discusses some key policy questions that emerge from this comparison.     

Biocatalytic polymeric membranes to decrease biofilm fouling and remove organic contaminants in wastewater: a review

The presence of recalcitrant contaminants in wastewater is major challenge to decrease pollution and associated health issues. As a consequence, membrane technologies have recently attracted industrial attention, yet a major setback of membrane employment is membrane fouling which leads to frequent discarding of membrane modules. More than 45% of all membrane fouling cases are caused by biofilms that are resistant to antimicrobial agents. Here we review polymeric membranes with antifouling properties, with focus on surface properties, fabrication, characterization, biocatalysis using enzymes and application towards the removal of dyes, phenol, pesticides and fertilizers. Nano-engineered fabrication of polymeric membranes allow to decrease fouling by 80–90%. Immobilized oxidoreductases in polymeric membranes allow 65–98% removal contaminants in wastewater.

     

Leaching of Alkali from Concrete in Contact with Waterways

Concrete is usually the preferred material for construction of structures in contact with water during their service life. Early age exposure to water is beneficial for curing of concrete structures. However, the pollution of water from freshly cast concrete in contact with water has not been investigated in detail. A significant increase in the alkalinity has recently been observed in a stream in contact with freshly installed concrete culverts. High alkalinity has caused distress to fresh water fish in the stream. A preliminary laboratory study was commenced to explore the effect of leaching of alkali into water from freshly placed concrete. Freshly cast concrete specimens were exposed to fresh water, covering a range of conditions observed in the field such as volume of concrete/volume of water, age of exposure and cement content. Analysis of the results indicated that early age contact with fresh concrete can lead to an increase in the pH levels of water up to 11, similar to the levels of pH observed in pore water inside freshly cast concrete. It was noted that until an age of 4 days from casting of concrete, the age of exposure does not significantly affect the changes in the peak pH levels of water. Continuous monitoring of water in contact with concrete also indicated that the pH levels diminish with time, which is attributed to the possible reaction of calcium hydroxide with atmospheric carbon. The paper will present the experimental study, the results, analysis and outcomes as well as planning of a more comprehensive study to observe possible ways of reducing the leaching of alkali from freshly placed concrete.     

Improvement in irrigation water use efficiency: a strategy for climate change adaptation and sustainable development of Vietnamese tea production

Irrigation is indispensable to overcome insufficient rainfall and to achieve a stabilized yield for tea production. As the severe scarcity of water resources because of climate change, water conservation through efficient irrigation has turned into a vital strategy for tea sector in solving this rising challenge. This paper analyzes irrigation water use efficiency of small-scale tea farms in Vietnam and identifies its determinants applying stochastic frontier analysis. Results showed that under decreasing returns to scale, the mean irrigation water use efficiency was 42.19 %, indicating the existence of substantial water waste. If farmers become more efficient in using water, saving 57.81 % of irrigation water is possible unaccompanied by reducing the observed output. The factors affecting tea farms’ irrigation water use efficiency were investigated by Tobit model. Gender, water shortage awareness, soil and water conservation practice, off-farm income share, extension services access and well water utilization showed significant influence on the efficiency of irrigation water. The study’ results provide insights to policymakers in implementing better water resource management amid climate change.     

Applicability of micellar electrokinetic chromatography to kinetic studies of photocatalytic oxidation of dibenzo-p-dioxin

Micellar electrokinetic chromatography (MEKC) using sodium dodecyl sulfate was tested for its ability to analyze mixtures containing three dioxin derivatives. Dioxin-containing samples, subjected to photocatalytic oxidation using TiO₂ and/or SnO₂ as the semiconductor catalyst were analyzed by MEKC to obtain the rate constant for each dioxin when it was degraded individually or in the presence of the other two dioxins. A significant degree of analyze competition was observed and the mixed catalyst offered important synergism.     

Lead (Pb) quantification in potable water samples: implications for regulatory compliance and assessment of human exposure

Assessing the health risk from lead (Pb) in potable water requires accurate quantification of the Pb concentration. Under worst-case scenarios of highly contaminated water samples, representative of public health concerns, up to 71–98 % of the total Pb was not quantified if water samples were not mixed thoroughly after standard preservation (i.e., addition of 0.15 % (v/v) HNO₃). Thorough mixing after standard preservation improved recovery in all samples, but 35–81 % of the total Pb was still un-quantified in some samples. Transfer of samples from one bottle to another also created high errors (40–100 % of the total Pb was un-quantified in transferred samples). Although the United States Environmental Protection Agency’s standard protocol avoids most of these errors, certain methods considered EPA-equivalent allow these errors for regulatory compliance sampling. Moreover, routine monitoring for assessment of human Pb exposure in the USA has no standardized protocols for water sample handling and pre-treatment. Overall, while there is no reason to believe that sample handling and pre-treatment dramatically skew regulatory compliance with the US Pb action level, slight variations from one approved protocol to another may cause Pb-in-water health risks to be significantly underestimated, especially for unusual situations of “worst case” individual exposure to highly contaminated water.     

Interactions between metal ions and the biopolymer in activated sludge: quantification and effects of system pH value

The quantification and effects of system pH value on the interactions between Pb(II) and the biopolymer in activated sludge were investigated. The biopolymer had two protein-like fluorescence peaks (Ex/Em = 280 nm/326–338 nm for peak A; Ex/Em = 220–230 nm/324–338 nm for peak B). The fluorescence intensities of peak B were higher than those of peak A. The fluorophores of both peaks could be largely quenched by Pb(II), and the quencher dose for peak B was about half of that for peak A. The modified Stern-Volmer equation well depicted the fluorescence quenching titration. The quenching constant (Ka) values for both peaks decreased with rising system pH value, and then sharply decreased under alkaline conditions. It could be attributed to that the alkaline conditions caused the reduction of available Pb(II) due to the occurrence of Pb(OH)₂ sediments. The Ka values of peak B were bigger than those for peak A at the same system pH values. Accordingly, the aromatic proteins (peak B) played a key role in the interactions between metal ions and the biopolymer.

Open image in new window