Assessment of air quality benefits from national air pollution control policies in China. Part II: Evaluation of air quality predictions and air quality benefits assessment

Following the meteorological evaluation in Part I, this Part II paper presents the statistical evaluation of air quality predictions by the U.S. Environmental Protection Agency (U.S. EPA)’s Community Multi-Scale Air Quality (Models-3/CMAQ) model for the four simulated months in the base year 2005. The surface predictions were evaluated using the Air Pollution Index (API) data published by the China Ministry of Environmental Protection (MEP) for 31 capital cities and daily fine particulate matter (PM_2.5, particles with aerodiameter less than or equal to 2.5 μm) observations of an individual site in Tsinghua University (THU). To overcome the shortage in surface observations, satellite data are used to assess the column predictions including tropospheric nitrogen dioxide (NO₂) column abundance and aerosol optical depth (AOD). The result shows that CMAQ gives reasonably good predictions for the air quality.The air quality improvement that would result from the targeted sulfur dioxide (SO₂) and nitrogen oxides (NO_x) emission controls in China were assessed for the objective year 2010. The results show that the emission controls can lead to significant air quality benefits. SO₂ concentrations in highly polluted areas of East China in 2010 are estimated to be decreased by 30–60% compared to the levels in the 2010 Business-As-Usual (BAU) case. The annual PM_2.5 can also decline by 3–15 μg m^?3 (4–25%) due to the lower SO₂ and sulfate concentrations. If similar controls are implemented for NO_x emissions, NO_x concentrations are estimated to decrease by 30–60% as compared with the 2010 BAU scenario. The annual mean PM_2.5 concentrations will also decline by 2–14 μg m^?3 (3–12%). In addition, the number of ozone (O₃) non-attainment areas in the northern China is projected to be much lower, with the maximum 1-h average O₃ concentrations in the summer reduced by 8–30 ppb.     

Visitor perspectives on sustainable tourism development in the Pitons Management Area World Heritage Site, St. Lucia

The Pitons Management Area (PMA) World Heritage Site is one of the most visited tourist attractions in St. Lucia. Given the magnitude of the tourism industry in St. Lucia in general, coupled with the expanding growth of tourism in the PMA, the need to adopt a sustainable approach to tourism development is imperative. Identifying visitors as a key stakeholder group in sustainable tourism development, this study examined their perspectives and support for sustainable tourism development in the PMA. More specifically, it examined visitors’ environmental, economic, and social attitudes based on a sustainable tourism development framework and explored the effect and best predictive validity of attitudes on support for sustainable tourism development. Results indicated that attitudes were generally positive, and as each of the respective attitudes increased, visitors’ level of support for sustainable tourism development at the PMA also increased. The Economic Attitudinal Index had the highest predictive power, followed by the Social Attitudinal Index. The Environmental Attitudinal Index was not significant although it was strongly correlated in the bivariate analysis. Implications of the findings for the sustainable development of tourism in the PMA are discussed.     

Initial Adjustments Within a New River Channel: Interactions Between Fluvial Processes, Colonizing Vegetation, and Bank Profile Development

A conceptual model of the morphological development of the riparian margins of newly cut river channels is presented, suggesting early feedbacks between vegetation growth and bank form. To test the model, observations of long and cross profiles, bank sediment and seed deposition, and bank vegetation development were collected over the first 2 years of river flows through a reach of the River Cole, West Midlands, UK. The newly created channel had a sinuous planform and varying asymmetric trapezoidal cross section in sympathy with the planform. No imposed bedforms or bank reseeding were included in the design. Over the 2 years, development of bedforms was rapid, with bed sediment sorting and bank profile adjustment occurring more steadily and progressively. Six classes of bank profile were identified by the end of the study period, illustrating close associations with sediment aggradation, vegetation colonization, and growth patterns. Vegetation colonization of the banks was seeded predominantly from local sources during the summer and from hydrochory (transport by the river) during the winter. Colonizing vegetation on the riverbanks appeared to act as a significant propagule source by the second summer and as an increasingly important roughness element, trapping both propagules and sediment, within the second year and providing early feedback into bank evolution. As a result, the time required for riparian margin development in the conceptual model was found to be considerably longer than observed in the study river. In addition, the role of surface wash/bank failure in modifying the bank profile and transporting seeds onto the upper bank face during the first year of bank development was found to be important in initiating rapid bank vegetation colonization and surface stabilization. This set of processes had not been incorporated in the initial conceptual model. In relation to channel restoration, this research illustrates that in small temperate rivers of modest energy the provision of an initial, sinuous corridor is sufficient to induce rapid development of fluvial features and vegetation cover without the need to construct bed forms or to seed the banks.     

Water quality impacts on sorbent efficacy for per- and polyfluoroalkyl substances treatment of groundwater

Per- and polyfluoroalkyl substances (PFAS) are a large group of synthetic compounds that have emerged as chemicals of concern in drinking water and groundwater. Typically, such waters are treated to remove PFAS by passing the water through a bed of sorbent material (e.g., activated carbon and anion exchange resins [AIX]). However, the efficacy of these sorbents varies depending on the types and concentrations of PFAS, in addition to water quality conditions such as organic matter content and conductivity (ionic strength). The choice of sorbent material to effectively treat PFAS in complex natural waters will, therefore, depend upon site water quality and PFAS conditions. To help inform these decisions, a series of evaluations using a rapid small-scale column test approach was conducted with two sorbent materials (a granulated activated carbon [GAC] and an AIX), individually and combined, under conditions where conductivity, pH, and organic carbon concentrations were varied in a semifactorial approach. Artificial groundwater batches were prepared to meet these test conditions and spiked with six PFAS compounds (perfluorobutane sulfonic acid [PFBS], perfluorobutanoic acid [PFBA], perfluorohexane sulfonic acid [PFHxS], perfluorohexanoic acid [PFHxA], perfluorooctane sulfonic acid [PFOS], and perfluorooctanoic acid [PFOA]), passed through small columns packed with ground sorbent material for ∼30,000 bed volumes of water for single sorbent treatments and ∼20,000 bed volumes for combined sorbent treatments, during which samples of effluent were captured and analyzed to quantify breakthrough of PFAS from the sorbent materials over time. AIX was found to be more effective than GAC at removing the tested perfluoroalkyl sulfonic acids (PFBS, PFHxS, and PFOS), but GAC was similarly or more effective than AIX at removing perfluorocarboxylic acids (PFBA, PFHxA, and PFOA) under high conductivity conditions. Overall, the efficacy of AIX at removing PFAS was more strongly impacted by organic carbon and conductivity than GAC, while pH had less of an effect on either sorbent's efficacy compared to the other test conditions.     

Chromosomal genes conferring tolerance to heavy metal (Ag) toxicity

Bacterial strains were isolated from sediment samples from the Thames River. Successive transfer growth of the various strains on nutrient agar containing increasing concentrations of AgNO₃ revealed that three of the bacterial isolates were found to be capable of tolerating high concentrations of AgNO₃ ranging from 20 to 80 mM on a solid medium and up to 10 mM AgNO₃ in liquid medium. Molecular characterization and identification based on 16S rDNA gene sequencing of three strains of bacteria that are tolerant to silver nitrate showed that the major tolerant strains include the superbug, Shewanella oneidensis, Pseudomonas sp. and Bacillus sp. Protein extraction and two-dimensional (2D) sodium dodecyl sulfate SDS-polyacrylamide gel electrophoresis (PAGE) of the protein extracts in bacteria exposed to very high concentrations of AgNO₃ revealed a general reduction in the number of expressed proteins, although two protein spots were conspicuously over expressed in the exposed bacteria compared to control. The N-terminal amino acid sequence analysis of the protein spots identified the major up-regulated proteins as the outer membrane protein To1C (45.2 kDa) and the structural protein of the flagellar filament, flagellin (28.34 kDa), encoded for by the to1C and fliC genes, respectively. The roles of these genes in a number of multi-drug resistant pathogen and potentials for biotechnological applications in toxic metal control for treatment of contaminated ecosystems and biomining were discussed.     

Reproductive toxicity of metals in calanoid copepods

This study investigated the effect of exposure route on metal accumulation, tissue distribution, and toxicity in the marine copepods Acartia hudsonica and A. tonsa. Sublethal toxicity was measured as decreases in egg production, hatching rate, ovarian development and protein (yolk) content of the egg. When algal food, exposed to Hg at 1 nM or Cd at 5 nM resulting in cells containing 34 and 64 nmol metal g^-1 dry weight, respectively, was ingested over a 4-h period by copepods, the total copepod body burden increased nine-fold for Hg and two-fold for Cd over background concentrations, and egg production decreased by 50%. Sublethal concentrations of metals were >2 orders of magnitude lower than LC₅₀ concentrations. Hatching rate, ovarian development and egg protein content all decreased following trophic exposure to metals, implying that the process of yolk accumulation (vitellogenesis) was affected. Exposure to dissolved Cd had no effect, but dissolved Hg at concentrations as low as 0.25 nM did affect egg production. Different toxic effects following different exposure routes were related to different metal distributions in the copepods: exposure to dissolved metal resulted in metal deposition in the exoskeleton, whereas exposure to dietary metal resulted in metal deposition in internal tissues. These findings indicate that enrichment of metal concentrations in internal tissues, which occurs primarily after exposure to dietary metal, affects vitellogenesis. The reproduction rate decreases by about 75% at metal concentrations only moderately higher than levels in coastal waters. Toxicity tests involving aquatic animals need to consider effects following uptake by different pathways, including the trophic transfer of metals.     

The municipal solid waste system and solid waste characterization at the municipality of Veles, Macedonia

A short-term study to characterize the solid waste stream in the Municipality of Veles, Macedonia, was performed during a 1 week period in the summer of 2002. In this study, several important parameters of the municipal solid waste stream were assessed. It was estimated that the average daily generation rate is 1.06+/-0.56 kg/cap/day, while the specific weights of the uncompacted and compacted solid waste are approximately 140.5 kg/m3 and 223 kg/m3, respectively. Furthermore, it was estimated that the daily generated volume of uncompacted waste is 7.5+/-4 L/cap/day. Although the short-term study is characterized by numerous limitations, in the absence of other existing data, such a study with direct measurements could significantly contribute to the development of an efficient solid waste management system in countries with economies in transition like Macedonia.     

Aquatic environmental nanoparticles

Researchers are now discovering that naturally occurring environmental nanoparticles can play a key role in important chemical characteristics and the overall quality of natural and engineered waters. The detection of nanoparticles in virtually all water domains, including the oceans, surface waters, groundwater, atmospheric water, and even treated drinking water, demonstrates a distribution near ubiquity. Moreover, aquatic nanoparticles have the ability to influence environmental and engineered water chemistry and processes in a much different way than similar materials of larger sizes. This review covers recent advances made in identifying nanoparticles within water from a variety of sources, and advances in understanding their very interesting properties and reactivity that affect the chemical characteristics and behaviour of water. In the future, this science will be important in our vital, continuing efforts in water safety, treatment, and remediation.     

Quantifying MTBE biodegradation in the Vandenberg Air Force Base ethanol release study using stable carbon isotopes

Compound-specific isotope analysis (CSIA) was used to assess biodegradation of MTBE and TBA during an ethanol release study at Vandenberg Air Force Base. Two continuous side-by-side field releases were conducted within a preexisting MTBE plume to form two lanes. The first involved the continuous injection of site groundwater amended with benzene, toluene and o-xylene ("No ethanol lane"), while the other involved the continuous injection of site groundwater amended with benzene, toluene and o-xylene and ethanol ("With ethanol lane"). The delta(13)C of MTBE for all wells in the "No ethanol lane" remained constant during the experiment with a mean value of -31.3 +/- 0.5 per thousand (n=40), suggesting the absence of any substantial MTBE biodegradation in this lane. In contrast, substantial enrichment in (13)C of MTBE by 40.6 per thousand, was measured in the "With ethanol lane", consistent with the effects of biodegradation. A substantial amount of TBA (up to 1200 microg/L) was produced by the biodegradation of MTBE in the "With ethanol lane". The mean value of delta(13)C for TBA in groundwater samples in the "With ethanol lane" was -26.0 +/- 1.0 per thousand (n=32). Uniform delta(13)C TBA values through space and time in this lane suggest that substantial anaerobic biodegradation of TBA did not occur during the experiment. Using the reported range in isotopic enrichment factors for MTBE of -9.2 per thousand to -15.6 per thousand, and values of delta(13)C of MTBE in groundwater samples, MTBE first-order biodegradation rates in the "With ethanol lane" were 12.0 to 20.3 year(-1) (n=18). The isotope-derived rate constants are in good agreement with the previously published rate constant of 16.8 year(-1) calculated using contaminant mass-discharge for the "With ethanol lane".     

Post-rehabilitation environmental hazard of Cu, Zn, As and Pb at the derelict Conrad Mine, eastern Australia

A post-rehabilitation audit of the derelict Conrad base metal mine, eastern Australia, indicates ongoing environmental hazard regarding acid mine drainage and concentrations of arsenic and lead to 3 wt% in the soil and sediment. In order to rehabilitate remote contaminated sites effectively, on-site analyses should be carried out to ensure that the materials used to rehabilitate the site are not contaminant-bearing. Understanding the geomorphic setting of the rehabilitated areas is also important in understanding where, and for what period, contaminated materials might be stored in fluvial systems downstream of mine workings. Chemical and geomorphic audits should form a fundamental part of all rehabilitation works to ensure favourable environmental outcomes.