Estimating dissolved reactive phosphorus concentration in surface runoff water from major Ontario soils

Phosphorus (P) loss from agricultural land in surface runoff can contribute to eutrophication of surface water. This study was conducted to evaluate a range of environmental and agronomic soil P tests as indicators of potential soil surface runoff dissolved reactive P (DRP) losses from Ontario soils. The soil samples (0- to 20-cm depth) were collected from six soil series in Ontario, with 10 sites each to provide a wide range of soil test P (STP) values. Rainfall simulation studies were conducted following the USEPA National P Research Project protocol. The average DRP concentration (DRP30) in runoff water collected over 30 min after the start of runoff increased (p < 0.001) in either a linear or curvilinear manner with increases in levels of various STPs and estimates of degree of soil P saturation (DPS). Among the 16 measurements of STPs and DPSs assessed, DPS(M3) 2 (Mehlich-3 P/[Mehlich-3 Al + Fe]) (r2 = 0.90), DPS(M3)-3 (Mehlich-3 P/Mehlich-3 Al) (r2 = 0.89), and water-extractable P (WEP) (r2 = 0.89) had the strongest overall relationship with runoff DRP30 across all six soil series. The DPS(M3)-2 and DPS(M3)-3 were equally accurate in predicting runoff DRP30 loss. However, DPS(M3)-3 was preferred as its prediction of DRP30 was soil pH insensitive and simpler in analytical procedure, ifa DPS approach is adopted.     

Ongoing ascent to the helium production plateau—Insights from system dynamics

Recent, pre-downturn, disturbance in the global helium market can be traced to the tight supply–demand position, which characterizes today’s changing helium supply structure. A detailed System Dynamics model provides fresh insight into the helium question and suggests a production path that is closely associated with future natural gas production. Venting of un-extracted helium to the atmosphere remains a central issue. The model indicates that improving resource exploitation strategies might extend a production plateau that emerges in the 2030s. Substitution will result in more helium being vented. To mitigate this, the industry needs to ensure security of supply (particularly after the Bureau of Land Management reserve is sold).     

Fungicide leaching from golf greens: effects of root zone composition and surfactant use

Soil water repellency in golf putting greens may induce preferential "finger flow," leading to enhanced leaching of surface applied fungicides. We examined the effects of root zone composition, treatment with a non-ionic surfactant, and the use of the fungicide iprodion or a combination of azoxystrobin and propiconazole on soil water repellency, soil water content distributions, fungicide leaching, and turf quality during 1 yr. Soil water repellency was measured using the water drop penetration time (WDPT) test and tension infiltrometers. Our study was made on a 3-yr-old experimental green seeded with creeping bentgrass (Agrostis stolonifera L.) 'Penn A-4' at Landvik in southeast Norway. The facility consists of 16 lysimeters with two different root zone materials: (i) straight sand (1% gravel, 96% sand, 3% silt and clay, 4 g kg(-1) organic matter) (SS) and (ii) straight sand mixed with garden compost to an organic matter content of 21 g kg(-1) (Green Mix [GM]). Surfactant treatment resulted in 96% lower average WDPTs at 1 cm depth, three times higher water infiltration rates at the soil surface, and reduced spatial variation in soil water contents. Fungicide leaching was close to zero for the GM lysimeters probably due to stronger sorption. Concentrations in the drainage water from SS lysimeters often exceeded surface water guideline values for all three fungicides, but surfactant treatment dramatically reduced fungicide leaching from these lysimeters. In autumn and winter, surfactant-treated plots were more infected with fungal diseases probably because of higher water content in the turfgrass thatch layer.     

Prediction of microbial accessibility of carbon-14-phenanthrene in soil in the presence of pyrene or benzo[a]pyrene using an aqueous cyclodextrin extraction technique

Traditionally, solvent extractions are routinely used in the assessment of contaminated land. However, vigorous solvent extractions only give total concentrations rather than that relating to the bioaccessible fraction. Recently, less harsh, aqueous-based extraction methods have been shown to be a better estimate of the microbial degradation of polycyclic aromatic hydrocarbons (PAHs). The aqueous-based hydroxypropyl-beta-cyclodextrin (HPCD) extraction technique was tested using 14C-PAHs in soils and compared against indigenous microbial mineralization (a measure of bioaccessibility) of 14C-phenanthrene in the presence of pyrene or benzo[a]pyrene (B[a]P) over a range of concentrations (0, 5, 10, or 50 mg kg(-1)) and aged for 0, 25, 50, and 100 d in four soils. At each time point, the total loss, extractability, and mineralization of 14C-phenanthrene was measured in each of the soils. The presence of the other PAHs had little effect on the behavior of 14C-phenanthrene in any of the soils. Comparisons between the amounts of 14C-phenanthrene extracted using HPCD and mineralized were made and showed that there was a correlation (1:1). This study demonstrates that HPCD extraction is able to predict the microbial accessibility fraction of 14C-phenanthrene in the presence of other PAHs in a range of soils, further supporting the applicability of this technique.     

Spectrophotometric determination of uranium with arsenazo-III in perchloric acid

A short, sensitive and reliable spectrophotometric method, which has advantages over all known "wet chemistry" methods for uranium determination with regard to tolerance to common interferences, has been developed for the determination of uranium. Selectivity, molar absorptivity and the determination range of uranium have been enhanced by using 0.07% arsenazo-III as a chromogenic reagent. The use of 3 mol dm(-3) perchloric acid as a medium of determination was found to be excellent in terms of good solvent compatibility on dilution, destruction of organic contamination and simplicity of operation. The uranium-arsenazo-III complex formed instantly, and was found to be stable for more than 3 weeks with constant absorbance. Beer's law was obeyed up to a uranium concentration of 16 microg g(-1), with a molar absorptivity at 651 nm of 1.45x10(5) mol(-1) dm(3) cm(-1) at 24+/-2 degrees C. Only phosphate and citrate at 70-fold excess over uranium interfere seriously, whereas other anions studied could be tolerated up to a 70-fold excess over uranium. Of the cations studied, only Mn(II), Co(II), Ni(II), Cu(II) and Cr(III) decreased the normal absorbance of the complex. Iron(III), Ce(III) and Y(III) enhanced the absorbance. Other cations studied did not affect the absorbance up to a 50-fold excess. The accuracy was checked by determining uranium from standard solutions in the range 10-50 microg g(-1). It was found to be accurate with a 96.0-98.6% recovery rate. The method has been successfully applied to standard reference materials and ore samples at microg g(-1) levels.     

Seabird mortality induced by land‐based artificial lights

Artificial lights at night cause high mortality of seabirds, one of the most endangered groups of birds globally. Fledglings of burrow‐nesting seabirds, and to a lesser extent adults, are attracted to and then grounded (i.e., forced to land) by lights when they fly at night. We reviewed the current state of knowledge of seabird attraction to light to identify information gaps and propose measures to address the problem. Although species in families such as Alcidae and Anatidae can be grounded by artificial light, the most affected seabirds are petrels and shearwaters (Procellariiformes). At least 56 species of Procellariiformes, more than one‐third of them (24) threatened, are subject to grounding by lights. Seabirds grounded by lights have been found worldwide, mainly on oceanic islands but also at some continental locations. Petrel breeding grounds confined to formerly uninhabited islands are particularly at risk from light pollution due to tourism and urban sprawl. Where it is impractical to ban external lights, rescue programs of grounded birds offer the most immediate and employed mitigation to reduce the rate of light‐induced mortality and save thousands of birds every year. These programs also provide useful information for seabird management. However, these data are typically fragmentary, biased, and uncertain and can lead to inaccurate impact estimates and poor understanding of the phenomenon of seabird attraction to lights. We believe the most urgently needed actions to mitigate and understand light‐induced mortality of seabirds are estimation of mortality and effects on populations; determination of threshold light levels and safe distances from light sources; documentation of the fate of rescued birds; improvement of rescue campaigns, particularly in terms of increasing recovery rates and level of care; and research on seabird‐friendly lights to reduce attraction.     

How wrong can you be? Implications of incorrect utility function specification for welfare measurement in choice experiments

Despite the vital role of the utility function in welfare measurement, the implications of working with incorrect utility specifications have been largely neglected in the choice experiments literature. This paper addresses the importance of specification with a special emphasis on the effects of mistaken assumptions about the marginal utility of income. Monte Carlo experiments were conducted using different functional forms of utility to generate simulated choices. Multi-Nomial Logit and Mixed Logit models were then estimated on these choices under correct and incorrect assumptions about the true, underlying utility function. Estimated willingness to pay measures from these choice modeling results are then compared with the equivalent measures directly calculated from the true utility specifications. Results show that for the parameter values and functional forms considered, a continuous-quadratic or a discrete-linear attribute specification is a good option regardless of the true effects the attribute has on utility. We also find that mistaken assumptions about preferences over costs magnify attribute mis-specification effects.     

Potential for natural and enhanced attenuation of sulphanilamide in a contaminated chalk aquifer

Understanding antibiotic biodegradation is important to the appreciation of their fate and removal from the environment. In this research an Isotope Ratio Mass Spectrometry(IRMS)method was developed to evaluate the extent of biodegradation of the antibiotic,sulphanilamide, in contaminated groundwater. Results indicted an enrichment in δ~(13)C of8.44‰ from-26.56(at the contaminant source) to-18.12‰(300 m downfield of the source).These results confirm reductions in sulphanilamide concentrations(from 650 to 10 mg/L)across the contaminant plume to be attributable to biodegradation(56%) vs. other natural attenuation processes, such as dilution or dispersion(42%). To understand the controls on sulphanilamide degradation ex-situ microcosms assessed the influence of sulphanilamide concentration, redox conditions and an alternative carbon source. Results indicated, high levels of anaerobic capacity(~50% mineralisation) to degrade sulphanilamide under high(263 mg/L), moderate(10 mg/L) and low(0.02 mg/L) substrate concentrations. The addition of electron acceptors; nitrate and sulphate, did not significantly enhance the capacity of the groundwater to anaerobically biodegrade sulphanilamide. Interestingly, where alternative carbon sources were present, the addition of nitrate and sulphate inhibited sulphanilamide biodegradation. These results suggest, under in-situ conditions, when a preferential carbon source was available for biodegradation, sulphanilamide could be acting as a nitrogen and/or sulphur source. These findings are important as they highlight sulphanilamide being used as a carbon and a putative nitrogen and sulphur source, under prevailing iron reducing conditions.