Effects of pH and feeding regime on methylmercury accumulation within aquatic microcosms

The effect of pH (pH 5, 6 or 7) on accumulation of radiolabelled methylmercury was examined using a laboratory microcosm system. Accumulation of labelled mercury at three trophic levels, primary consumers (Daphnia magna), secondary consumers (rainbow trout, Salmo gairdneri) and tertiary consumers (walleye, Stizostedion vitreum) was not significantly affected by pH. Our results are in direct contrast with field observations of elevated methylmercury concentrations in fish from low pH water and indicate that the elevated mercury residues observed in the field result from factors other than the direct effects of pH on accumulation of methylmercury by aquatic organisms. Both water and diet were important as sources of the labelled mercury which was accumulated by walleye. Walleye which were fed rainbow trout, that had accumulated labelled mercury from within the experimental microcosms, accumulated almost twice as much labelled mercury as walleye fed non-labelled prey, or walleye which were not fed. Walleye fed non-labelled rainbow trout accumulated slightly more labelled mercury than walleye which were not fed, presumably as a result of the higher metabolic rate of the fish which were fed.     

The role of herbicides in the erosion of salt marshes in eastern England

Laboratory studies and field trials were conducted to investigate the role of herbicides on saltmarsh vegetation, and their possible significance to saltmarsh erosion. Herbicide concentrations within the ranges present in the aquatic environment were found to reduce the photosynthetic efficiency and growth of both epipelic diatoms and higher saltmarsh plants in the laboratory and in situ. The addition of sublethal concentrations of herbicides resulted in decreased growth rates and photosynthetic efficiency of diatoms and photosynthetic efficiency of higher plants. Sediment stability also decreased due to a reduction in diatom EPS production. There was qualitative evidence that diatoms migrated deeper into the sediment when the surface was exposed to simazine, reducing surface sediment stability by the absence of a cohesive biofilm. Sediment loads on leaves severely reduced photosynthesis in Limonium vulgare. This, coupled with reduced carbon assimilation from the effects of herbicides, could have large negative consequences for plant productivity and over winter survival of saltmarsh plants. The data support the hypothesis that sublethal herbicide concentrations could be playing a role in the increased erosion of salt marshes that has occurred over the past 40 years.     

Contaminants of food

A scheme has been developed to rank 70 industrial organic chemicals in order of their priority for further study as potential contaminants of food. Numerical scales were developed for the following seven key criteria concerning environmental issues, food and toxicity:

-Production volume

-Pattern of usage

-Possible fate in the environment

-Likelihood of chemical entering the food chain

-Mechanism of entry into the food chain

-Persistence and accumulation in the food chain

-Toxicity.

Each chemical was assigned a score for the above criteria, which were combined to give an overall ranking for the chemicals. This scheme has been endorsed by the MAFF Steering Group on Chemical Aspects of Food Surveillance. It will be used in the assessment of relative priorities for further non-statutory surveillance for these contaminants in the UK food supply.     

Application of the tracer-aerosol gradient interpretive technique to sulfur attribution for the big bend regional aerosol and visibility observational study

A simple data analysis method called the Tracer-Aerosol Gradient Interpretive Technique (TAGIT) is used to attribute particulate S and SO2 at Big Bend National Park in Texas and nearby areas to local and regional sources. Particulate S at Big Bend is of concern because of its effects on atmospheric visibility. The analysis used particulate S, SO2, and perfluorocarbon tracer data from six 6-hr sampling sites in and near Big Bend National Park. The data were collected in support of the Big Bend Regional Aerosol and Visibility Observational (BRAVO) Study; the field portion was conducted from July through October 1999. Perfluorocarbon tracer was released continuously from a tower at Eagle Pass, TX, approximately 25 km northeast of two large coal-fired power plants (Carbon I and II) in Coahuila, Mexico, and approximately 270 km east-southeast of Big Bend National Park. The perfluorocarbon tracer did not properly represent the location of the emissions from the Carbon power plants for individual 6-hr sampling periods and attributed only 3% of the particulate S and 27% of the SO2 at the 6-hr sites in and near Big Bend to sources represented by the tracer. An alternative approach using SO2 to tag "local" sources such as the Carbon plants attributed 10% of the particulate S and 75% of the SO2 at the 6-hr sites to local sources. Based on these two approaches, most of the regional (65-86%) and a small fraction (19-31%) of the local SO2 was converted to particulate S. The analysis implies that substantial reductions in particulate S at Big Bend National Park cannot be achieved by only reducing emissions from the Carbon power plants; reduction of emissions from many sources over a regional area would be necessary.     

Odours from pulp mill effluent treatment ponds: the origin of significant levels of geosmin and 2-methylisoborneol (MIB)

Pulp and paper mills are well known for their sharp, sulphurous stack emissions, but the secondary treatment units also can be significant contributors to local odour. This study investigated the source(s) of earthy/musty emissions from a mixed hardwood pulp mill in response to a high local odour. Samples from five sites in the mill over five months were analyzed for earthy/musty volatile organic compounds (VOCs), examined microscopically, and plated for bacteria and moulds. In all cases, activated sludge showed substantial geosmin levels and to a lesser extent 2-methylisoborneol (MIB) at 2000-9000 times their odour threshold concentrations (OTCs). These VOCs were lower or absent upstream and downstream, suggesting that they were produced within the bioreactor. Geosmin and MIB were highest in late summer and declined over winter, and correlated with different operating parameters. Geosmin was most closely coupled with temperature and MIB with nitrogen uptake. Cyanobacteria were present in all sludge samples, but actinomycetes were not found. Gram-negative bacteria and one fungal species isolated from the bioreactor and secondary outfall tested negative for geosmin or MIB. We conclude: (i) geosmin and MIB contribute significantly to airborne odours from this mill, but are diluted below OTC levels at the river; (ii) these VOCs are generated by biota in the activated sludge; and (iii) cyanobacteria are likely primary source(s). The growth of cyanobacteria in activated sludge represents a loss of energy to the heterotrophic population; thus earthy/musty odours may represent a diagnostic for less than optimal conditions.     

Predicting the occurrence of radon-222 in groundwater supplies

The intent of this study was to develop an understanding of some of the factors that affect the concentration ol radon-222 (²²²Rn) in drinking water supplies derived from groundwater, with specific application to North Carolina. Data for this investigation were collected on a sample of 96 North Carolina public water supply wells. Water samples were collected and analyzed for²²²Rn content. Data on site geology and well characteristics (discharge, specific capacity, depth, and casing length) were obtained from existing sources. From a statistical examination of the data collected in this study, we conclude that there is a distinct and statistically significant difference in the mean²²²Rn concentrations of groundwater associated with different types of rocks. The data, however, also indicate that there is a great degree of variability in the²²²Rn concentrations of samples drawn from any giver rock type. The situation is made slightly better by introducing a second variable given as the geologic region of a water supply. A fairly surprising finding of this study is the relative insignificance of discharge, specific capacity, depth, and casing length of wells as predictors of²²²Rn concentration. The present study indicates that use of these variables as predictors does not significantly improve the likelihood of locating water supplies with elevatec²²²Rn concentrations.     

PM2.5 and PM10 Concentrations from the Qalabotjha Low-Smoke Fuels Macro-Scale Experiment in South Africa

This article presents results from the particulate monitoringcampaign conducted at Qalabotjha in South Africa during the winter of 1997. Combustion of D-grade domestic coal and low-smoke fuels were compared in a residential neighborhood to evaluate the extent of air quality improvement by switchinghousehold cooking and heating fuels.Comparisons are drawn between the gravimetric results from the two types of filter substrates (Teflon-membrane and quartz-fiber) as well as between the integrated and continuous samplers. It is demonstrated that the quartz-fiber filters reported 5 to 10% greater particulate mass than the Teflon-membrane filters, mainly due to the adsorption of organic gases onto the quartz-fiber filters. Due to heating of sampling stream to 50 °C in the TEOM continuous sampler and the high volatile content of the samples, approximately 15% of the particulate mass was lost during sampling.The USEPA 24-hr PM_2.5 and PM₁₀ National Ambient Air Quality Standards (NAAQS) of 65 g m^-3 and 150 g m^-3, respectively, were exceeded on several occasions during the 30-day field campaign. Average PMconcentrations are highest when D-grade domestic coal was used, and lowest between day 11 and day 20 of the experiment when a majority of the low-smoke fuels were phased in. Source impacts from residential coal combustion are also found to be influenced by changes in meteorology, especially wind velocity.PM_2.5 and PM₁₀ mass, elements, water-soluble cations (sodium, potassium, and ammonium), anions (chloride, nitrate, and sulfate), as well as organic and elemental carbonwere measured on 15 selected days during the field campaign. PM_2.5 constituted more than 85% of PM₁₀ at three Qalabotjha residential sites, and more than 70% of PM₁₀ at the gradient site in the adjacent community of Villiers. Carbonaceous aerosol is by far the most abundant component, accounting for more than half of PM mass at the three Qalabotjha sites, and for more than a third of PM mass at the gradient site. Secondary aerosols such as sulfate, nitrate,and ammonium are also significant, constituting 8 to 12% of PM mass at the three Qalabotjha sites and 15 to 20% at the Villiers gradient site.     

Place,human agency and community resilience – considerations for public health management of smoke from prescribed burning

Prescribed burning is now a widely accepted bushfire hazard management strategy. While evidence points to reduced levels of public health harm compared to severe bushfire, smoke created by planned burns remains a community concern with need for evidence-based public health management. Findings are presented from an Australian study of community experiences of prescribed burns, associated smoke, and public health communications. We find that “place” influences how information is received and used for the management of the effects of planned burns; and that this is significant for human agency and community resilience. We provide recommendations for public health management.     

Possibility of converting indigenous Salvadora persica L. seed oil into biodiesel in Pakistan

In this research study, biodiesel has been successfully produced from vegetable seed oil of an indigenous plant Salvadora persica L. that meets the international biodiesel standard (ASTM D6751). The biodiesel yield was 1.57 g/5 g (31.4% by weight) and the in-situ transesterification ester content conversion was 97.7%. The produced biodiesel density was 0.894 g/mL, its kinematic viscosity 5.51 mm²/s, HHV 35.26 MJ/kg, flash point 210°C, cetane no. 61, and sulfur content 0.0844%. Thermal analysis of the biodiesel showed that 97% weight loss was achieved at 595°C with total oxidation of the biodiesel. The production energy efficiency was 0.46% with a lab scale setup, assuming the volume fraction ratio (volume of the sample/total volume of the equipment used). The results revealed that single-step in-situ transesterification method is suitable for the production of biodiesel from S. persica seed oil.