Application of simple soil-water flow models to the transfer of surface-applied solutes to streams

In the context of leaching of surface-applied nitrate fertilizer to runoff, this paper evaluates the performance of five simple predictive models, based upon: (1) field capacity; (2) uniform displacement; (3) wetting front; (4) by-passing (preferential) flow; and (5) soil-water domains. Predicted behaviour and observed on an 85-cm depth soil are compared for leaching depth and outflow response. Predictive success of outflow by the models for 40 monitored rainfall events were: (1) 60%; (2) 52%; and (3) 76%. For the by-passing flow model (4), simple prediction of pedal excess flow (4a) gave a success of 80%; where calculations of the operational volume in preferential flow were involved (4b), variations from 20 to 100% success occurred for a range of operational volumes, the lowest volumes giving the greatest success (4c). The soil-water domain model (5) is a simple, predictive scheme involving the classification of outflow events according to antecedent soil moisture (θ_a); the method uses the mobile: retained water content (θ_r) at 2 bars and field capacity (θ_fc). Using soil-water domains alone was of limited success but when the domains were combined with rainfall intensity, the scheme specified outflow exactly. Thus, for θ_a < θ_r, no soil-water outflow occurred, even at high rainfall intensity; for θ_a >θ_fc outflow always occurred, even at low rainfall intensity and for θ_a >θ_r < θ_fc the simple by-passing model (4a) achieved 100% predictive success. The implications for fertilizer application are discussed.     

Particle size relationships at the Fresno Supersite

Aerosol size distributions are presented for a winter intensive study at the Fresno Supersite. The size distributions were consistent with and predictive for continuous PM2.5 measured by beta attenuation. They varied temporally with respect to source type and intensity, with the smallest mean diameters associated with high NOx concentrations during weekday morning rush hours. Conversely, small and large particle and black carbon (BC) concentrations were higher during Sunday and weekday evenings in response to traffic and residential wood combustion emissions. Ambient PM2.5 light scattering (Bsp) was precisely but systematically underestimated during winter, probably because of heating in the sample shelter.     

Chapter one: exposure measurements

Determining human exposure to suspended particulate concentrations requires measurements that quantify different particle properties in microenvironments where people live, work, and play. Particle mass, size, and chemical composition are important exposure variables, and these are typically measured with time-integrated samples on filters that are later submitted to laboratory analyses. This requires substantial sample handling, quality assurance, and data reduction. Newer technologies are being developed that allow in-situ, time-resolved measurements for mass, carbon, sulfate, nitrate, particle size, and other variables. These are large measurement systems that are more suitable for fixed monitoring sites than for personal applications. Human exposure studies need to be designed to accomplish specific objectives rather than to serve too many purposes. Resources need to be divided among study design, field sampling, laboratory analysis, quality assurance, data management, and data analysis phases. Many exposure projects allocated too little to the non-measurement activities.     

The economics of enforcing air pollution controls

The goal of this paper is to determine the likely effect on a firm's control actions of alternative implementation and enforcement policies available to the control agency. Three alternatives are studied, legal enforcement through the new source performance standards set forth by EPA, and two effluent fee enforcement alternatives. First, a generalized model of the effects of implementation and enforcement policies on the firm's control action is developed. This model assumes that the firm is an expected cost minimizer. The model is then applied to the case of particulate matter discharges from coal-fired power plants in order to estimate empirically the effect of policy alternatives on the firm's control efforts. Finally, the results of the model and its empirical application are used to develop policy functions which relate control to the values of various policy parameters. These results lead us to several policy recommendations.     

An Analysis of Gorgonian (Anthozoa; Octocorallia) Zonation on Singapore Reefs with Respect to Depth

Zonation patterns of gorgonians from 15 sites on reefs south of the main island of Singapore reveal discontinuities in terms of both generic richness and total abundance. This establishes the crest, slope, and bottom as ecologically distinct environments of the reef, as interpreted by these gorgonian population parameters. Only members of the family Melithaeidae are able to colonise all three zones. Other genera are restricted to the slope and bottom; in particular, Acanthogorgia and Echinomuricea are only found at the bottom zone.     

Dioxins and polychlorinated biphenyls (PCDD/Fs and PCBs) in food from farms close to foot and mouth disease animal pyres

To control the outbreak of foot and mouth disease, which occurred in the UK in early 2001, a large number of farm animals were slaughtered. Where it was not possible to render or landfill the carcasses, they were destroyed by burning on open pyres, with wood, coal and other materials. Uncontrolled combustion such as this is known to produce small quantities of dioxins and an investigation was made into whether, as a result of the burning, there was an elevation in the concentrations of these compounds in food produced in the areas close to the pyres. With few exceptions, concentrations of PCDD/Fs and PCBs were within the expected ranges as predicted by reference data. No accumulation over time was evident from a repeat milk sampling exercise. Where elevated concentrations of PCDD/Fs and PCBs were found in chickens and eggs, they were in samples not destined for the food chain. Elevated levels in some samples of milk from Dumfries and Galloway were not found in earlier or later samples and may have been found as a result of a temporary feeding regime. Elevated concentrations in lamb from Carmarthenshire were from very young animals which would not have entered the food chain. There was no evidence of any significant increase in dietary exposure to PCDD/Fs and PCBs as a result of the FMD pyres.     

Black carbon aerosol at McMurdo Station, Antarctica

Aerosol light absorption as black carbon (BC) was measured from November 19, 1995, to February 6, 1996, at a location 0.65 km downwind of the center of McMurdo Station on the Antarctic coast. The results show a bimodal frequency distribution of BC concentrations. Approximately 65% of the measurements were found in a mode at a low range of concentrations centered at approximately 20 ng/m3. These concentrations are higher than those found at other remote Antarctic locations and probably represent contamination from the station. The remaining measurements were in a high-concentration mode (BC approximately 300 ng/m3), indicating direct impact of local emissions from combustion activities at the station. High values of BC were associated with winds from the direction of the station, and the BC flux showed a clear directionality. Maximum BC concentrations occurred between 7:00 and 11:00 a.m. The "polluted" mode accounted for more than 80% of the BC frequency-weighted impact at this location.     

Evaluation of an intensive sampling and analysis method for carbon monoxide

This paper describes a portable, low-cost whole air sampler capable of collecting 12 1-L samples in tedlar bags and using a single "D" cell for power. The results are presented from two tests of an intensive sampling and analysis method for measuring ambient carbon monoxide (CO) concentrations in urban areas using this sampler. The method is evaluated in comparison with an approved continuous CO analyzer, in intercomparisons of the results of re-analysis of the samples, and by examination of the results from co-located samplers. The precision of the analytical method was found to be +/-0.30 ppmv. The precision of the sampling method was found to be +/-0.73 ppmv and therefore is the limiting factor in the method's overall precision. These values are sufficient to verify attainment of National Ambient Air Quality Standards (NAAQS) levels in urban areas. Improvements in the sampler and analytical procedure are discussed.     

Results from a pilot-scale air quality study in Addis Ababa, Ethiopia

Twenty-one samples were collected during the dry season (26 January–28 February 2004) at 12 sites in and around Addis Ababa, Ethiopia and analyzed for particulate matter with aerodynamic diameter <10 μm (PM₁₀) mass and composition. Teflon-membrane filters were analyzed for PM₁₀ mass and concentrations of 40 elements. Quartz-fiber filters were analyzed for chloride, sulfate, nitrate, and ammonium ions as well as elemental carbon (EC) and organic carbon (OC) content. Measured 24-h PM₁₀ mass concentrations were <100 and 40 μg m⁻³ at urban and suburban sites, respectively. PM₁₀ lead concentrations were <0.1 μg m⁻³ for all samples collected, an important finding because the government of Ethiopia had stopped the distribution of leaded gasoline a few months prior to this study. Mass concentrations reconstructed from chemical composition indicated that 34–66% of the PM₁₀ mass was due to geologically derived material, probably owing to the widespread presence of unpaved roads and road shoulders. At urban sites, EC and OC compounds contributed between 31% and 60% of the measured PM₁₀ while at suburban sites carbon compounds contributed between 24% and 26%. Secondary sulfate aerosols were responsible for <10% of the reconstructed mass in urban areas but as much as 15% in suburban sites, where PM₁₀ mass concentrations were lower. Non-volatile particulate nitrate, a lower limit for atmospheric nitrate, constituted <5% and 7% of PM₁₀ at the urban and suburban sites, respectively. At seven of the 12 sites, real-time PM₁₀ mass, real-time carbon monoxide (CO), and instantaneous ozone (O₃) concentrations were measured with portable nephelometers, electrochemical analyzers, and indicator test sticks, respectively. Both PM₁₀ and CO concentrations exhibited daily maxima around 7:00 and secondary peaks in the late afternoon and evening, suggesting that those pollutants were emitted during periods associated with motor-vehicle traffic, food preparation, and heating of homes. The morning concentration maxima were likely accentuated by stable atmospheric conditions associated with overnight surface temperature inversions. Ozone concentrations were measured near mid-day on filter sample collection days and were in all cases <45 parts per billion.