Spatial & temporal variations of PM10 and particle number concentrations in urban air

The size of particles in urban air varies over four orders of magnitude (from 0.001 μm to 10 μm in diameter). In many cities only particle mass concentrations (PM10, i.e. particles <10 μm diameter) is measured. In this paper we analyze how differences in emissions, background concentrations and meteorology affect the temporal and spatial distribution of PM10 and total particle number concentrations (PNC) based on measurements and dispersion modeling in Stockholm, Sweden. PNC at densely trafficked kerbside locations are dominated by ultrafine particles (<0.1 μm diameter) due to vehicle exhaust emissions as verified by high correlation with NOx. But PNC contribute only marginally to PM10, due to the small size of exhaust particles. Instead wear of the road surface is an important factor for the highest PM10 concentrations observed. In Stockholm, road wear increases drastically due to the use of studded tires and traction sand on streets during winter; up to 90% of the locally emitted PM10 may be due to road abrasion. PM10 emissions and concentrations, but not PNC, at kerbside are controlled by road moisture. Annual mean urban background PM10 levels are relatively uniformly distributed over the city, due to the importance of long range transport. For PNC local sources often dominate the concentrations resulting in large temporal and spatial gradients in the concentrations. Despite these differences in the origin of PM10 and PNC, the spatial gradients of annual mean concentrations due to local sources are of equal magnitude due to the common source, namely traffic. Thus, people in different areas experiencing a factor of 2 different annual PM10 exposure due to local sources will also experience a factor of 2 different exposure in terms of PNC. This implies that health impact studies based solely on spatial differences in annual exposure to PM10 may not separate differences in health effects due to ultrafine and coarse particles. On the other hand, health effect assessments based on time series exposure analysis of PM10 and PNC, should be able to observe differences in health effects of ultrafine particles versus coarse particles.     

Crypsis versus intimidation—anti-predation defence in three closely related butterflies

Butterflies that hibernate exhibit particularly efficient defence against predation. A first line of defence is crypsis, and most hibernating butterflies are leaf mimics. When discovered, some species have a second line of defence; the peacock, I. io, when attacked by a predator flicks its wings open exposing large eyespots and performs an intimidating threat display. Here we test the hypothesis that butterflies relying solely on leaf mimicking and butterflies with an intimidating wing pattern, when attacked, exhibit different behavioural suites—because leaf mimicking is best implemented by immobility, whereas intimidating coloration is best implemented by intimidating behaviour. In laboratory experiments blue tits, Parus caeruleus, were allowed 40 min to attack single individuals of three species of butterfly: one relying solely on crypsis, the comma, Polygonia c-album; one relying on intimidating wing pattern in addition to crypsis, the peacock; and one intermediate species, the small tortoiseshell Aglais urticae. The results are in accordance with expectations and demonstrate that: (1) birds take longer to discover the leaf mimicking species, the comma, than the tortoiseshell and the peacock; (2) the comma remained motionless throughout experimental trials but small tortoiseshells and peacocks flicked their wings when attacked; (3) the most intimidating butterfly, the peacock, started flicking its wings at a greater distance from the attacking bird than the small tortoiseshell; and (4) the intimidating pattern and behaviour of peacocks was effective—when discovered, all peacocks survived interactions with blue tits, whereas only 22% of commas and 8% of small tortoiseshells survived.     

Sampling and analysis of particulate and gaseous polycyclic aromatic hydrocarbons from coal tar sources in the working environment

A sampling method for polycyclic aromatic hydrocarbons (PAH) in workplace atmospheres using a standard glass fiber filter with a back-up section of Amberlite XAD-2 is described. Filters and XAD are solvent-desorbed and, without further clean-up, the solutions are submitted to high performance liquid chromatographic analysis using fluorimetric detection. Recovery of PAH from XAD-2 was studied, and was found to be in the range 80–100%. The sampling method was evaluated in a coke plant, an aluminium plant and in a creosote impregnating plant. The method described is rapid and sensitive for the determination of the most important workplace PAH, and accounts for both particulate and gaseous PAH.     

Sorbent-assisted liquid-liquid extraction (Chem-Elut) of polychlorinated biphenyls, dibenzo-p-dioxins and dibenzofurans in the lipid fraction of human blood plasma

This work compares two lipid extraction methods for determining 24 polychlorinated biphenyls (PCBs), seven dibenzo-p-dioxins (PCDDs) and ten dibenzofurans (PCDFs) in human blood plasma. The first method was based on conventional liquid-liquid partitioning with chloroform-methanol and the other made use of a sorbent (Chem-Elut) to facilitate the partitioning of lipids into a mixture of hexane and 2-propanol. A multi-layer-silica column including acid- and base-impregnated silica gel was used to reduce the amounts of lipid present in the samples before a basic alumina clean-up step and activated carbon fractionation of planar analytes (PCDD/Fs and non-ortho-PCBs) and non-planar analytes (including ortho-chlorinated PCBs). Gas chromatography coupled to high resolution mass spectrometry was used to identify and quantify the analytes in the two fractions. The wet weight based concentrations obtained by the two methods were in agreement but both methods suffer from large organic solvent consumption. The toxic equivalencies derived for PCBs and PCDD/Fs using the two methods were also in agreement. However, the chloroform-methanol method gave slightly higher lipid recoveries, although with greater variation, than the sorbent-assisted method. Nevertheless, despite giving lower lipid recoveries, the sorbent-assisted method has advantages in ease of use and applicability to whole blood samples. The formation of emulsions was avoided with the Chem-Elut method, which probably explains the lower variability in the lipid determinations.     

Occupational exposure

Concentrations of polychlorinated biphenyls (PCB), polychlorinated naphthalenes (PCN), polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF), hexachlorobenzene and methylsulphonyl metabolites of PCB were determined in blood plasma from potentially exposed workers and controls. Three of the potentially exposed subjects had worked with cable incineration and two were electricians. Extraction of the organochlorine compounds and lipids were performed using the lipophilic gel Lipidex. Different adsorbents and gel permeation chromatography were applied for further purification of the samples and separation of analytes. Determinations of the chlorinated compounds were made by using gas chromatography with electron-capture detection and gas chromatography-mass spectrometry. Only small differences in the concentrations of organochlorine compounds were found in the plasma from the three subject groups. Thus, specific exposure of the workers could not be confirmed.     

Sampling and analysis of polycyclic aromatic hydrocarbons (PAH) from two-stroke chain-saw engines

A sampling and analysis method for PAH from two-stroke engines is described. The method, which uses a standard glass fiber filter with a back-up section of Amberlite XAD-2 for sampling and GC or GC-MS for analysis, is suitable for both emission studies and occupational studies during logging. Filters and XAD-2 are desorbed with cyclohexane in an ultrasonic bath. After separation on a silica-gel micro column, the samples are submitted to analyses by capillary GC. The method is simple and covers both gaseous and particulate PAH. Naphthalene and alkyl substituted naphthalenes are also quantified.     

Development of a simple selective SFE method for the determination of desorption behaviour of PCBs in two Swedish sediments

A simple selective supercritical fluid extraction (SFE) method was developed for the determination of desorption behaviour of PCBs in sediments. This method was applied to determine the distribution of individual PCB congeners among sites of differing bonding strengths in two Swedish sediments (Lake J?rnsj?n and Baltic bay Orserumsviken). Four different PCB fractions were distinguished in each sediment by applying consecutively harsher supercritical fluid extraction conditions on the same sample. Even though the two sediments had completely different textures, they showed very similar extraction behaviour. It was shown that, in both sediments, a major part of the PCBs (58% and 65%, respectively) were located at "fast sites", from which they were extractable already with the mildest extraction conditions (60 min, 40 degrees C and 120 bar). Only a small fraction of the PCBs were so tightly bound to the sediments (located at "slow sites"), that they could be extracted only under the harshest conditions (60 min, 150 degrees C and 400 bar). Information of this kind should be of great value for the determination of bioavailability of pollutants in sediments and soils, and it is the author's belief that this technique has the potential to develop into a powerful tool in environmental risk assessment.     

Selective supercritical fluid extraction to estimate the fraction of PCB that is bioavailable to a benthic organism in a naturally contaminated sediment

Selective supercritical fluid extraction (SFE) at 40 degrees C, 120 bar and 60 min was utilised as a means to estimate the bioavailable fraction of PCBs to chironomid larvae in a naturally contaminated limnic sediment. This extraction methodology removed about 50% of the PCBs from the sediment. According to the equilibrium partitioning theory, organisms in that sediment should decrease their uptake from the sediment to the same extent, biota-to-sediment accumulation factors (BSAFs) thus remaining constant. Surprisingly, the BSAFs for 11 PCB congeners decreased some 40% for the selectively extracted sediment as compared to BSAFs for organisms dwelling in untreated sediment. The results were statistically significant at the 0.001 level using a paired t-test. This can only be interpreted so that selective SFE removed easily available PCBs preferentially, leaving more tightly bound PCBs behind. Hence, by fine-tuning extraction conditions, this methodology might be used to estimate bioavailable fractions by chemical means.     

Toxaphene levels in salmon (Salmo salar) from the Baltic Sea

Three toxaphene congeners have been determined in salmon from the Swedish coastal environment using both supercritical fluid (SFE) and the traditional liquid/liquid extractions. The levels obtained using a modifier-free SFE technique, followed by group separation on a silica gel column, were by far much lower than concentrations obtained by SFE with a modifier or liquid/liquid extraction. The mean concentrations on fresh weight basis using a liquid/liquid extraction technique were 5.87, 8.70 and 1.59 microg/kg for CHBs 26, 50 and 62, respectively. There was a plausible relationship between the various fishing sites and the toxaphene levels.