Field depuration and biotransformation of paralytic shellfish toxins in scallop<Emphasis Type="Italic"> Chlamys nobilis</Emphasis> and green-lipped mussel<Emphasis Type="Italic"> Perna viridis</Emphasis>

Under laboratory conditions, the scallop Chlamys nobilis and the mussel Perna viridis were exposed to N-sulfocarbamoyl toxins (C2 toxin), a paralytic shellfish toxin (PST), by feeding a local toxic strain of the dinoflagellate Alexandrium tamarense (ATDP) that produced C2 toxin exclusively. The bivalves were subsequently depurated in the field, and their depuration kinetics, biotransformation and toxin distribution were quantified. Depuration was characterized by a rapid loss within the first day, followed by a secondary slower loss of toxins. In the fast depuration phase, scallops detoxified PSTs more quickly than the mussels (depuration rate constants for scallops and mussels were 1.16 day^–1 and 0.87 day^–1, respectively). In contrast, the mussels detoxified PSTs more quickly than the scallops in the slow depuration phase, and the calculated depuration rate constants (mean+SE) from day 2 to day 13 were 0.063+0.009 day^–1 and 0.040+0.019 day^–1 for mussels and scallops, respectively. The differences in the appearances of gonyautoxins, GTX2 and GTX3, and their decarbamoyl derivatives, dcGTX2, dcGTX3 and GTX5, which are all derivatives of C2 toxin, indicated active and species-specific biotransformation of the algal toxins in the two bivalves. In both species of bivalves, the non-viscera tissue contained fewer toxins and lower concentrations than the viscera-containing tissue compartment. In scallops, very little toxin was distributed in the adductor muscle. In mussels, most of the PSTs were found in the digestive gland with significant transport of toxins into the digestive gland from other tissues during the course of depuration. The toxin profiles of scallops and mussels differed from each other and from that of the toxic algae fed. A significant fraction of GTX5 was detected in the mussels but not in the scallops. Our study demonstrates a species specificity in the depuration kinetics, biotransformation and tissue distribution of PSTs among different bivalves.Communicated by T. Ikeda, Hakodate     

Male morphology and behavior correlate with reproductive success in the American redstart (Setophaga ruticilla)

Summary In a population of American redstarts (Setophaga ruticilla), we determined whether a relationship exists between seasonal reproductive success (RS) and a variety of male and female morphological and behavioral characters including plumage and male song. Adult males differ dramatically in plumage from yearling males and also exhibit variable amounts of black on their breast (bib size). Adult males were more successful than yearlings in terms of the number of eggs laid by their females. Among adult males, those with smaller bibs (less black) had females that laid more eggs, and produced more hatchlings and more fledglings. We found no evidence to indicate that this result was a consequence of territory quality. We examined a number of features of song but none alone was a predictor of RS; however, one song feature (rare repeat song) correlated with bib size. When bib size and rare repeat song were analyzed simultaneously, both were found to relate to RS. No female features were predictors of RS, but females arriving earlier at the breeding site mated with males with smaller bibs. The evidence is consistent with the view that plumage of redstarts may be used as a basis for female choice. Offprint requests to: R.E. Lemon     

Exposure to metals (Ca,K, Mn) and road salt (NaCl) differentially affect development and survival in two model amphibians

ABSTRACT

Human activity has led to widespread chemical alteration of natural environments. Aquatic ecosystems are especially susceptible to chemical changes, including those caused by runoff and invasive species. Here, we examined the effects of water chemistry, specifically sodium chloride as well as three metals (Ca, K, and Mn) known to differ between native and invasive wetland plant species’ leaf tissues, on the development of two model amphibians: the native Northern leopard frog, Lithobates pipiens, and the non-native African clawed frog, Xenopus laevis. We exposed frog eggs to metal treatment solutions and measured time to hatching (TTH), and following hatching, we exposed tadpoles to a lethal concentration of sodium chloride and recorded time to death (TTD). We found that increasing metal concentrations generally resulted in acceleration of TTH for Xenopus tadpoles, but had no effect on leopard frogs. However, increasing metal concentrations (Ca, Mn) increased leopard frog tadpole susceptibility to NaCl (decreased TTD), while increasing metal concentrations (Ca, K) generally resulted in decreased Xenopus tadpole susceptibility to NaCl. Overall, our data suggest that invasive amphibians may be more tolerant to chemical changes than native amphibians, including those driven by the introduction of invasive plant species.     

A comparative investigation on the biosorption of lead by filamentous fungal biomass

The removal of lead from aqueous solutions by adsorption on filamentous fungal biomass was studied. Batch biosorption experiments were performed to screen a series of selected fungal strains for effective lead removal at different metal and biomass concentrations. Biosorption of the Pb²⁺ ions was strongly affected by pH. The fungal biomass exhibited the highest lead adsorption capacity at pH 6. Isotherms for the biosorption of lead on fungal biomass were developed and the equilibrium data fitted well to the Langmuir isotherm model. At pH 6, the maximum lead biosorption capacity of Mucor rouxii estimated with the Langmuir model was 769 mg/g dry biomass, significantly higher than that of most microorganisms. Biomass of Mucor rouxii showed specific selectivity for Pb²⁺ over other metals ions such as Zn²⁺. Ni²⁺ and Cu²⁺. This fungal strain may be applied to develop potentially cost-effective biosorbent for removing lead from effluents. The technique of scanning electron microscopy coupled with X-ray dispersion analysis shows that Pb²⁺ has exchanged with K⁺ and Ca²⁺ on the cell wall of Mucor rouxii, thereby suggesting ion exchange as one of the dominant mechanisms of metal biosorption for this fungal strain.     

Global pollution monitoring of butyltin compounds using skipjack tuna as a bioindicator

Butyltin compounds (BTs) including mono- (MBT), di- (DBT), tri-butyltin (TBT) and total tin (sigmaSn), were determined in the liver of skipjack tuna (Katsuwonus pelamis) collected from Asian offshore waters (off-Japan, the Japan Sea, off-Taiwan, the East China Sea, the South China Sea, off-Philippines, off-Indonesia, the Bay of Bengal), off-Seychelles, off-Brazil and open seas (the North Pacific). BTs were detected in all the skipjack tuna collected, suggesting widespread contamination of BTs even in offshore waters and open seas on a global scale. Considering specific accumulation, Sex-, body length- differences and migration of skipjack tuna did not seem to affect BT concentrations, indicating rapid reflection of the pollution levels in seawater where and when they were collected. Skipjack tuna is a suitable bioindicator for monitoring the global distribution of BTs in offshore waters and open seas. High concentrations of BTs were observed in skipjack tuna from offshore waters around Japan, a highly developed and industrialized region (up to 400 ng/g wet weight). Moreover skipjack tuna collected from offshore waters around Asian developing countries also revealed the levels comparable to those in Japan (up to 270 ng/g wet weight) which may be due to the recent improvement in economic status in Asian developing countries. High percentages (almost 90%) of BTs in total tin (sigmaSn: sum of inorganic tin+organic tin) were found in the liver of skipjack tuna from offshore waters around Asian developing countries. This finding suggests that the anthropogenic BTs represent the major source of Sn accumulation in skipjack tuna from these regions.     

A knowledge-based approach to regional acidification modelling

Data from over 2000 stations and knowledge from experts on atmospheric transport, soil geochemistry, lake chemistry, wetland processes and acidification modelling were assembled in an expert system. The data were grouped by aggregates of tertiary watersheds based on water chemistry knowledge. A set of expert rules was used to determine which of six existing models was most appropriate for a given set of data. Comparison of computed and observed alkalinity indicated median relative errors from 11.3–17.9%, with regression slopes ranging from 0.91–1.18 and regression coefficients between 0.82 and 0.99. The expert model performance was further confirmed with paleolimnological data and other independent sets of data. The sensitivity of the predicted alkalinity was illustrated by changing some of the rules. Given that the rules were acceptable by experts and produced reasonable agreement with observations, the knowledge-based system seemed a viable approach to the impact assessment of acidic deposition.     

Water quality assessment programs in Australia deciding what to measure,and how and where to use bioindicators

Effective water quality assessment programs require the formulation of common objectives between managers who are making decisions and scientists who are obtaining the information on which those decisions are to be made. The data collected must be apropriate for use in the decision making process. After the objectives have been formulated a number of testable hypotheses can be proposed and evaluated in terms of what information is required for decision making.From a management perspective it is important to know if an impact occurs and what management strategy to adopt to reduce or eliminate the impact. When bioaccumulators are used to indicate environmental quality the organisms proposed need to be fully evaluated before being used. Communities, which are often used to assess levels of impact, have the capacity to assimilate pollutants and they will function under pollutant stress. Thus managers need to make value judgements about when a community structure or function has shifted from acceptable to adverse. Bioassays in which the effects of pollutants on growth, biochemistry and behaviour are measured, give an indication of the sub-lethal effects of a pollutant, but it is difficult to set meaningful levels that are not to be exceeded for use by managers.Difficulties in using chemical and biological data mainly arise from a lack of appreciation of environmental heterogeneity. The data obtained must meet the needs for statistically testing hypotheses. Before programs can be designed to meet statistical needs the potential sources of variability must be considered. Once the minimum differences that are seen as important have been determined, the number of replicates needed can be calculated. Data verification is also needed, as if the validity of data is questioned, so will any decisions that have been made based on those data. Finally programs should be designed to minimize the sampling effort/cost to meet the objectives.     

Indigenous pig production and welfare of ultra-poor ethnic minority households in the Northern mountains of Vietnam

Environment, Development and Sustainability - Eliminating ultra-poverty has received particular attention of policymakers and scholars. The ultra-poor in mountainous regions often live on...     

Quantitative tools for implementing the new definition of significant portion of the range in the U.S. Endangered Species Act

In 2014, the Fish and Wildlife Service (FWS) and National Marine Fisheries Service announced a new policy interpretation for the U.S. Endangered Species Act (ESA). According to the act, a species must be listed as threatened or endangered if it is determined to be threatened or endangered in a significant portion of its range (SPR). The 2014 policy seeks to provide consistency by establishing that a portion of the range should be considered significant if the associated individuals’ “removal would cause the entire species to become endangered or threatened.” We reviewed 20 quantitative techniques used to assess whether a portion of a species’ range is significant according to the new guidance. Our assessments are based on the 3R criteria—redundancy (i.e., buffering from catastrophe), resiliency (i.e., ability to withstand stochasticity), and representation (i.e., ability to evolve)—that the FWS uses to determine if a species merits listing. We identified data needs for each quantitative technique and considered which methods could be implemented given the data limitations typical of rare species. We also identified proxies for the 3Rs that may be used with limited data. To assess potential data availability, we evaluated 7 example species by accessing data in their species status assessments, which document all the information used during a listing decision. In all species, an SPR could be evaluated with at least one metric for each of the 3Rs robustly or with substantial assumptions. Resiliency assessments appeared most constrained by limited data, and many species lacked information on connectivity between subpopulations, genetic variation, and spatial variability in vital rates. These data gaps will likely make SPR assessments for species with complex life histories or that cross national boundaries difficult. Although we reviewed techniques for the ESA, other countries require identification of significant areas and could benefit from this research.     

Assessment of air quality benefits from national air pollution control policies in China. Part I: Background,emission scenarios and evaluation of meteorological predictions

Under the 11th Five Year Plan (FYP, 2006–2010) for national environmental protection by the Chinese government, the overarching goal for sulfur dioxide (SO₂) controls is to achieve a total national emissions level of SO₂ in 2010 10% lower than the level in 2005. A similar nitrogen oxides (NO_x) emissions control plan is currently under development and could be enforced during the 12th FYP (2011–2015). In this study, the U.S. Environmental Protection Agency (U.S.EPA)’s Community Multi-Scale Air Quality (Models-3/CMAQ) modeling system was applied to assess the air quality improvement that would result from the targeted SO₂ and NO_x emission controls in China. Four emission scenarios — the base year 2005, the 2010 Business-As-Usual (BAU) scenario, the 2010 SO₂ control scenario, and the 2010 NO_x control scenario—were constructed and simulated to assess the air quality change from the national control plan. The Fifth-Generation NCAR/Penn State Mesoscale Model (MM5) was applied to generate the meteorological fields for the CMAQ simulations. In this Part I paper, the model performance for the simulated meteorology was evaluated against observations for the base case in terms of temperature, wind speed, wind direction, and precipitation. It is shown that MM5 model gives an overall good performance for these meteorological variables. The generated meteorological fields are acceptable for using in the CMAQ modeling.