Radiocesium in North San Francisco Bay and Baja California coastal surface waters

Radiocesium, 137Cs, and rare earth elements (REEs) were determined in suspended material and dissolved fractions of waters across the salinity gradient in North San Francisco Bay (estuary). We describe the variation of this conservative isotope tracer with salinity and sediment load. REE data are used to differentiate marine and terrigenous source terrains for suspended material and dissolved fractions. We estimate that about 1-4 x 10(10) Bq of 137Cs migrates annually on suspended material through the North Bay. In addition, 137Cs concentrations were measured in surface waters off Baja California. Combined in situ water density (sigma(t)) and 137Cs data distinguish between California Current and Gulf of California water, and delineate areas of upwelling, where nutrient-rich, deep Pacific Intermediate water, with little or no 137Cs, is brought to the surface off promontories along Baja California.     

Weathering of radiocaesium contamination on urban streets,walls and roofs

Recent investigations in Russia have emphasised the significance of dose contributions from contamination on urban streets and roof pavings, and, typically to a lesser extent, walls in the urban environment. The crucial factor determining the magnitude of these contributions is the retention of the contamination by the different types of urban surface. Since the Chernobyl accident, a series of long-term field studies has been carried out on urban streets, walls and roofs, to examine the weathering processes of 137Cs on the various surface types. The derived time-functions are applied to estimate resultant long-term doses to inhabitants of an urban centre. The paper highlights the effect on caesium retention of surface material characteristics.     

Assessment of industrial effluent and its impact on soil and plants

The present study deals with the assessment of industrial water of an electronic component manufacturing unit with electroplating and its subsequent effects on soil and plants receiving the effluent. The physico-chemical parameters of the effluent samples showed higher value than that of ground water. The treated effluent was within the permissible limit. Microtox test was conducted and determined the degree of toxicity of untreated, treated effluents as well as the water sample collected at effluent discharge point of receiving river (confluence point). The physico- mechanical parameters of the soil samples were not changed due to irrigation of the treated effluent, but the concentration of metals were comparatively higher than the control soil. Higher accumulation of metals was found in the plant parts in naturally growing weeds and cultivated crop plant irrigated with treated effluent. Elevated accumulation of metals in Eichhornia crassipes and Marsilea sp. growing along the effluent channel has been identified as a potential source of biomonitoring of metals particularly for Cu and Ca and can be utilised for the removal of heavy metal from wastewater.     

Metalaxyl effect on nitrogenase activity (acetylene reduction) and yield of mungbean (Vigna radiata (L.) wilzek)

In an experiment, application of different levels of metalaxyl to a sandy loam soil significantly affected the nodulation and nitrogenase activity of mungbean. In both the compost amended and unamended soils, 0.5 mg kg(-1) of metalaxyl enhanced acetylene reduction activity and yield of mungbean, where as higher concentrations (1 mg and 2.5 mg kg(-1) of fungicide) inhibited the nodulation traits as well as economic traits of mungbean.     

Environmental effect on the reoccurrence of Alternaria alternata on Trianthema portulacastrum

Trianthema portulacastrum is a noxious weed which spreads rapidly in the field. Pathogen Alternaria alternata was observed on this host for three years continuously i.e. 1997 to 1999. The incidence of the pathogen depended on rainfall and temperature.     

Acidification in developing countries: ecosystem sensitivity and the critical load approach on a global scale

Acidification represents a growing threat to certain developing country ecosystems in tropical and subtropical climates. A methodology investigating the extent of acidification risks from sulfur emissions on a global scale is presented. Atmospheric transfer models have been used to calculate transfer and deposition of sulfur (using emissions for 1990 and a projection for 2050) and alkaline soil dust. A method to derive the relative sensitivity of terrestrial ecosystems is explained and preliminary critical load values are assigned. A range of values for critical loads and base cation deposition have been used to investigate uncertainty in maps depicting the excess of deposition above critical loads. These show an increasing risk of acidification in 2050 in extended regions of southern and eastern Asia, as well as parts of southern Africa, in comparison to 1990. Certain areas, especially in Asia, are shown at risk even when high values of critical load and base cation deposition are used.     

Enzymatic treatment of sanitary landfill leachate

The objective of this investigation was to study the effectiveness of applying enzymes (bioaugmentation) for enhancement of biological treatability of leachates generated in a typical municipal solid waste sanitary landfill. The basic purpose of enzyme use is to enforce the biodecomposition of organic constituents, as well as to reduce nitrogen content. A laboratory-scale sequencing batch (bio)reactor (SBR) was used for the examination of enzymatic application. The effect of different operation strategies on the efficiency of this biological treatment process was studied to optimize performance, especially for the removal of nitrogen compounds and of biodegradable organic matter. It was found that the enzymatic process was able to remove organic matter effectively (expressed as BOD5 and COD) and nitrogen content, color and turbidity.     

Atmospheric fate and transport of dioxins: local impacts

We conducted model simulations of the atmospheric fate and transport of PCDD/F to assess the fraction of emitted PCDD/F that would deposit within 100 km from the source. We considered eight major categories of PCDD/F emission sources and six different locations, to cover a wide range of source characteristics, PCDD/F congener profiles and particle size distributions, meteorological conditions and terrain configurations. These results suggest that for sources that have tall stacks and/or high plume rise (e.g., copper smelters, cement kilns, sinter plants), only a small fraction of PCDD/F emissions is deposited locally (typically, less than 10% within 100 km). Other source categories such as municipal solid waste incinerators, medical waste incinerators and diesel trucks lead to a greater fraction of PCDD/F being deposited locally; nevertheless, the majority of their PCDD/F emissions tends to be transported beyond 100 km. Although local impacts may need to be addressed for these latter source categories, it appears that the long-range potential impacts of PCDD/F need to be addressed for all source categories. Sensitivity studies were conducted to investigate the effect of various key model inputs on simulation results. These studies suggest that an advanced atmospheric dispersion model should be used for cases where PCDD/F emissions may present some local concerns because the results are very sensitive to the treatment of dispersion. Also, it is essential to obtain accurate characterizations of the particle size distribution of particulate PCDD/F because the dry deposition flux is very sensitive to the particle size distribution.     

Air pollution modeling for an industrial complex and model performance evaluation

Jamshedpur, the steel city of India situated in the eastern part of India is affected by increasing air pollution levels as a result of concentrated industrial activities. The impact of NOx emissions resulting from various air pollution sources, viz. industries, vehicles and domestic, was estimated using Industrial Source Complex Short-Term gaussian dispersion model. The contribution of NOx concentration from industrial, vehicular and domestic sources was found to be 53, 40 and 7%. Further statistical analysis was carried out to evaluate the model performance by comparing measured and predicted NOx concentrations. The model performance was found good with an accuracy of about 68%.     

Contribution of dissolved sulfates and sulfites in hydrogen sulfide emission from stagnant water bodies in Sri Lanka

Accumulation of sulfur-containing compounds and their bacterial mediated reductions have led to the emission of pungent odors from stagnant water bodies. This study is focused on the contribution of inorganic sulfur compounds in the emission of hydrogen sulfide. The measured dissolved oxygen levels have demonstrated good negative correlations with the dissolved sulfide levels implying the oxygen deficiency is the key for the reduction of sulfate ion and sulfite ion to sulfide ion. Particularly, the dissolved molar fractions of sulfide from the total dissolved sulfur compounds (sulfates, sulfites and sulfides) have a very good correlation with the dissolved oxygen for the stagnant water bodies except the artificially aerated prawn farms. For the stagnant water bodies with significant correlations, linear regressions are reported for them to be utilized in estimating one component of the regression from the measurement of the other. The measured data were further utilized to estimate the levels of hydrogen sulfide gas. The pH of the water bodies has confined much of the dissolved sulfides in the form of bisulfide ion and they can be easily escaped to the atmosphere upon acidification due to industrial discharges and/or acidic precipitations. The estimated levels of hydrogen sulfide just above the water surface were plotted for the most polluted stagnant water body in Sri Lanka for the pH range of 5-10 and temperature range of 25-35 degrees C.