Analysis of welding fumes: A short note on the comparison between two sampling techniques

It is well established that welding fumes contain toxic substances, and that its composition is dependent on multiple factors, such as nature of the welding process and chemical compositions of the welding consumables and base materials. In order to prevent accidents and, thus to contribute to the safety of protection of welders, the establishment of a database on welding fume components is considered as essential. This has led to the development and upgradation of sampling techniques of welding fumes. Up to now, few standard techniques exist in this area. This study describes the results of the analysis of welding fumes, in terms of heavy metals, for a set of welding electrodes commonly used in carbon steel manufacture. Sampling was done by two different techniques: using the one currently known as “fume box” and common techniques in workplace atmospheres.     

Distribution and sources of PAHs using three pine species along the Ebro River

Needles of three pine species (Pinus halepensis, Pinus pinea and Pinus nigra) were analysed to assess the occurrence of polycyclic aromatic hydrocarbons (PAHs) in 34 sites located throughout the Ebro River, in Northeast Spain. Overall, the concentration varied between 55 and 808 ng g^− 1 (dry weight). The three- and four-ring PAHs were the most representative, with phenanthrene having 43% of the total PAH load and naphthalene showing a high incidence in rural areas. Despite matrix apparent similarities, P. halepensis needles revealed higher entrapment levels than P. nigra and P. pinea, the latter showing the lowest levels. The assessment of possible sources using PAH ratios (phenanthrene/anthracene and fluoranthene/pyrene) did not reveal a clear tendency regarding the distinction of petrogenic and pyrogenic sources in general, reflecting heterogeneous sources of PAHs in the Ebro area.     

Assessing dam implementation impact on threatened carnivores: the case of Alqueva in SE Portugal

Large dam construction in water deficient areas is a management decision often controversial. Besides providing water storage, economical benefits, and a source of renewable energy, the construction and flooding caused by large dams cause disruptions in natural systems. We monitored the pre- and post-Alqueva dam impacts on the threatened carnivore species (polecat, otter, wildcat and Iberian lynx) populations in SE Portugal, and assessed which factors mostly contribute to post-dam distribution. Major short term impacts of large dams are: (1) increase in accessibility and human presence; (2) movement of heavy machinery and dam-workers; (3) deforestation with habitat loss and fragmentation; (4) change from lotic to lentic system; (5) lower prey availability and harsher capture; and (6) changes in land use adjacent to the reservoir. Thus, the response to those impacts can be predicted as a decline of polecat, wildcat and lynx distribution ranges, and a recovery of the otter from the severe short term impacts. Our results corroborate this hypothesis for all the species, especially during deforestation/early flooding. Otter's distribution range increased in the phase of greater impact, with a subsequent decrease with flooding. Our results suggest carnivores used "escape" areas with favourable habitat and prey conditions, however, the areas with higher probability of species presence decreased by two fold showing a drastic range reduction. To ensure populations' survival of these charismatic threatened carnivore populations of Mediterranean landscapes of south-east Portugal, we propose continuing the monitoring program and the development of a conservation program for the subsisting areas of optimal and suboptimal habitats.     

Environmental distribution of PAHs in pine needles,soils, and sediments

Introduction  

The content of 16 polycyclic aromatic hydrocarbons (PAHs) was determined in 60 samples from three environmental matrices (soils, sediments, and pine needles) in an effort to assess their distribution on a river basin scale.     

Analytical methods and validation for determining trace elements in red wines

The objective of this work is to quantify As, Hg, Cd, Ni and Pb in Portuguese red wines. First, the methods for the quantification of trace elements in red wines were validated. Several pre-treatments were compared, namely a pre-digestion process with HNO₃, a pre-oxidation step with H₂O₂, and a spiking step of wine samples with a known concentration of the trace elements analyzed. Except for As, it was determined that the quantification of the trace elements does not require a pre-digestion process with HNO₃. For all of the trace elements analyzed, a pre-oxidation step with H₂O₂ may enable an accurate quantification. The techniques chosen for the quantification of trace elements were hydride generation atomic absorption spectrometry (HGAAS) for As and Hg, electrothermal atomic absorption spectrometry (ETAAS) for Cd, and flame atomic absorption spectrometry (FAAS) for Ni and Pb. In the second stage of this work, 25 Portuguese red wines spanning all of the red wine-producing regions were analyzed for all of the five trace elements referred to above. Only Cd and Pb have shown concentrations above the limit values defined by the “Organization Internationale de la Vigne et du Vin.” The Target Hazard Quotient (THQ) equation was used to determine in which wine-producing regions that wine consumption can be a problem for public health in terms of the concentrations of the five trace elements analyzed. THQ values have indicated that for the universe of the 25 red wines analyzed no region produces wines that can pose problems for public health, when the Portuguese red wine standard consumption is considered.     

Pine needles as passive bio-samplers to determine polybrominated diphenyl ethers

Eight polybrominated diphenyl ethers (PBDEs) were determined in pine needles of three species (Pinus halepensis, Pinus pinea and Pinus nigra) collected in the NE Spain in an attempt to use this matrix for the biomonitoring of airborne PBDEs. The method used was based in ultrasonic extraction followed by alumina and Florisil clean-up and determination by gas chromatography coupled to mass spectrometry in negative chemical ionization. Recoveries were between 99% and 138%, limits of detection between 0.011 and 0.070 ng g⁻¹-dw (0.232 ng g⁻¹-dw for BDE 209) and repeatability lower than 13%. PBDE levels ranged between 0.027 ng g⁻¹-dw and 13.04 ng g⁻¹-dw, with predominance of BDE 209, followed by BDEs 47. P. halepensis was the species with the highest PBDE levels and P. nigra, the least, according to their widespread and remote distribution, respectively. The presence of PBDEs in pine needles was attributed to the release of in-use PBDEs, transport through atmosphere and adsorption upon lipid rich pine needles. Given the easy collection of pine needles, its ample distribution and its potential to accumulate airborne contaminants, this matrix is proposed as passive bio-sampler to be used in PBDE monitoring programs.

Capsule

Pine needles can be used to biomonitor airborne PBDEs.     

Effect of cattle slurry separation on greenhouse gas and ammonia emissions during storage

Storage of cattle slurry leads to emissions of methane (CH(4)), nitrous oxide (N(2)O), ammonia (NH(3)), and carbon dioxide (CO(2)). On dairy farms, winter is the most critical period in terms of slurry storage due to cattle housing and slurry field application prohibition. Slurry treatment by separation results in reduced slurry dry matter content and has considerable potential to reduce gaseous emissions. Therefore, the efficiency of slurry separation in reducing gaseous emissions during winter storage was investigated in a laboratory study. Four slurry fractions were obtained: a solid and a liquid fraction by screw press separation (SPS) and a supernatant and a sediment fraction by chemically enhanced settling of the liquid fraction. Untreated slurry and the separated fractions were stored in plastic barrels for 48 d under winter conditions, and gaseous emissions were measured. Screw press separation resulted in an increase of CO(2) (650%) and N(2)O (1240%) emissions due to high releases observed from the solid fraction, but this increase was tempered by using the combined separation process (CSP). The CSP resulted in a reduction of CH(4) emissions ( approximately 50%), even though high emissions of CH(4) (46% of soluble C) were observed from the solid fraction during the first 6 d of storage. Screw press separation increased NH(3) emissions by 35%, but this was reduced to 15% using the CSP. During winter storage greenhouse gas emissions from all treatments were mainly in the form of CH(4) and were reduced by 30 and 40% using SPS and CSP, respectively.     

Evaluation of an Exposure Assay to Measure Uptake of Sediment Pah by Fish

The ecological risks of polynuclear aromatic hydrocarbons (PAH) in aquatic sediments will vary with both toxicity and bioavailability to aquatic biota. While there are standardized protocols to test the acute toxicity of sediment-borne compounds to aquatic invertebrates, there are none for assessing bioavailability to fish. We found that sediment-borne PAH caused an exposure-dependent induction of cytochrome P450 (CYP1A) enzymes in rainbow trout (Oncorhynchus mykiss) fingerlings exposed in semi-static 96 h bioassays, as shown by increased activity of ethoxyresorufin-o-deethylase (EROD). Assuming that PAH are taken up by trout due to partitioning from organic and inorganic constituents of sediments, we tested the effect of different test variables on bioaccumulation using induction as an index of exposure. EROD activity increased with exposure of fish to increasing volumes of sediments containing PAH, i.e., with increasing ratios of sediment to water. Uptake of single compounds from sandy sediments did not differ from uptake from clay or low organic (7% LOI — loss on ignition) sediments, but decreased when organic content was very high (58% LOI). Maximum induction was observed within 24~h of exposure and at 7.5^C relative to 15, 22, or 28^C. Storage and handling techniques had minor effects on sediment EROD induction potency. Absolute EROD activity was greater in white sucker (Catostomus commersoni) a benthic species, than in trout, a pelagic species. However, when basal (negative control) activity was accounted for, there was no difference in response between the species. Together, these experiments provide a basis for developing a standard protocol to test the bioavailability to fish of sediment-borne PAH.     

A wind tunnel and numerical study on the surface friction distribution on a flat roof with solar panels

Environmental Fluid Mechanics - This work aims to contribute for a better understanding of how solar panels, installed on a flat roof, affect the potential of aeolian erosion of loose particles...