Critical success factors of sustainable manufacturing practices in Malaysian automotive industry

The purpose of this study is to examine the critical success factors of sustainable manufacturing practices (SMPs) in Malaysian automotive industry. The questionnaires were designed and distributed to the 50 respondents. The pilot study sample consists of 26 respondents from 50 questionnaires, with an average response rate of 52%. The results of reliability analysis show that social responsibility is critical factor influencing the direct SMPs implementation success. By implementing SMPs in Malaysian automotive industry, it can assist company to improve the quality of management. Thus, this study recommends that the future research explore the influence of SMPs on sustainable performance in Malaysian automotive industry.     

A New Unsaturated Poly(ester-urethane) Based on Terephthalic Acid Derived from Polyethylene Terephthalate (PET) of Waste Bottles

The new unsaturated poly(ester-urethane) was synthesized by the reaction of 4,4??-methylenediphenyldiisocyanate with 4,4??-di(2,3-butenhydroxyl) terephthalate in the ratio of 1:1. 4,4??-di(2,3-butenhydroxyl) terephthalate was first prepared by reacting 2?mol of cis-2-butene-1, 4-diol with 1?mol of terephthalic acid. The terephthalic acid used was derived from the recycling of PET bottles via subjection to saponification process. The synthesized compounds were characterized by CHN analysis, FT-IR, ¹H NMR and UV?CVis spectroscopy, with consistency of results showing the presence of the new unsaturated poly(ester-urethane) II. Thermal properties of the new polymer was verified by differential scanning calorimetry and thermogravimetric analysis, whereas the mechanical properties were characterized by tensile, elongation, hardness, adhesion and impact testing. The electrical conductivity and the electrical resistance of the compound were observed with increasing applied voltage.     

Lessons from community based management of floodplain fisheries in Bangladesh

Inland (floodplain) fisheries remain the most important contributor to fish production in Bangladesh. They have in the past been administered to generate government revenue without due concern for sustainability or equity. Community Based Fisheries Management (CBFM) is a possible solution and was tested in 19 waterbodies (rivers and beels) during 1996-2000. The outcomes so far are assessed with respect to social, institutional, and physical context, and the interactions that arose in establishing CBFM. The lessons drawn are that: it was essential that communities obtained rights over the fisheries, strong facilitation was necessary, taking up visible resource management actions greatly helped, success was more likely in homogeneous communities, external threats were a strong limiting factor, clear boundaries and small fisheries were not so critical, and new institutions could be built with as much ease (or difficulty) as modifying existing ones. Effective well-defined partnerships of NGOs and government were not easy to establish but were sufficiently beneficial that in several locations new community institutions for fisheries management were established. This is a slow process, the sustainability of local management institutions is not yet established, although they continued during an interim period without funding, further phased support is planned to strengthen these organizations and to generate evidence of impacts and momentum to influence wider fisheries policy in and beyond Bangladesh.     

A conceptual model of the role of complex science in local authority consultations about air quality management

There exists a clear imperative across the EU and within the UK towards the enhanced integration of community knowledge in environmental and health decision-making processes. The underlying social force that underpins this dynamic is the drive for a more accountable, transparent and publicly acceptable decision-making arena. However, relatively little research has been undertaken on the evaluation of local air quality management consultation in particular. In this context, the paper presents an evaluation of evidence resulting from questionnaire survey and case study research undertaken in the first round of the statutory process of local air quality management (LAQM), in which local authorities are required to consult on their air quality findings and intentions. We suggest that local authority perceptions of the relative abilities of differing stakeholders' grasp of air quality science, the process that translates that science into policy, and the institutional and organizational status of stakeholders (i.e. whether they are statutory or non-statutory stakeholders) may tend to transitively determine the choice of consultation methods used, the communication strategies chosen and the relative integration of stakeholder feedback into the LAQM decision-making process. In order to interrogate this potentially problematic chain of risk communication events, a preliminary conceptual model has been developed to enable the interrogation of the pathways through, and the obstacles to, the translation of air quality knowledge. The task is to unveil the sequential chains of association that comprise the LAQM risk communication process.     

Source Apportionment of Particulate Matter (PM10) and Indoor Dust in a University Building

A study on source apportionment of indoor dust and particulate matter (PM₁₀) composition was conducted in a university building by using chemometrics. The objective of this study was to investigate the potential sources of selected heavy metals and ionic species in PM₁₀ and indoor dust. PM₁₀ samples were collected using a low-volume sampler (LVS) and indoor dust was collected using a soft brush. Inductively coupled plasma spectrometry (ICP-MS) was used to determine the concentration of heavy metals, while the concentration of cations and anions was determined by atomic absorption spectrometer (AAS) and ion chromatography (IC), respectively. The concentration of PM₁₀ recorded in the building throughout the sampling period ranged from 20 ± 10 μgm^?3 to 80 ± 33 μgm^?3. The composition of heavy metals in PM₁₀ and indoor dust were dominated by zinc (Zn), followed by lead (Pb), copper (Cu), and cadmium (Cd). Principle component analysis (PCA) and multiple linear regression (MLR) showed that the main sources of pollutants in PM₁₀ came from indoor renovations (73.83%), vehicle emissions (16.38%), earth crust sources (9.68%), and other outdoor sources (0.11%). For indoor dust, the pollutant source was mainly earth crust. This study suggests that chemometrics can be used for forensic investigation to determine the possible sources of indoor contaminants within a public building.     

Levels of heavy metals in tissues of shingi fish (Heteropneustes fossilis) from Buriganga River, Bangladesh

Heavy metal pollution was reported in commercially valuable freshwater edible fish in the Buriganga River, Bangladesh. The concentrations of As, Pb, Cd, Cr, Zn, and Cu were investigated in the muscle, gill, stomach, intestine, and liver of Heteropneustes fossilis caught at three stations to assess the degree of fish pollution by heavy metals. Significant differences in concentrations of analyzed elements were observed among different tissues, but not among the stations. The ranges of the measured concentrations (μg/g dry weight) in the tissues of H. fossilis were as follows: arsenic concentration was (0.2–0.4), (0.82–0.90), (3.29–3.99), (2.20–2.80), and (2.41–2.90), that of lead was (1.79–2.20), (4.95–6.55), (10.36–13.38), (5.74–9.70), and (18.20–18.79), that of cadmium was (0.3–0.4), (2.87–4.27), (1.03–1.63), (1.55–4.59), and (2.25–5.50), that of chromium was (1.40–1.70), (3.52–3.72), (2.28–5.29), (2.77–3.79), and (4.25–8.65), that of zinc was (24.47–28.82), (16.82–18.80), (20.22–22.20), (22.86–26.68), and (60.82–67.80), and that of copper was (7.80–8.50), (6.22–6.81), (38.21–44.25), (17.07–21.03), and (43.24–47.30) in the muscle, gill, stomach, intestine, and liver, respectively. This research showed that the liver appeared to be the main heavy metal storage tissue, while the muscle had the lowest levels of analyzed metals. The concentrations of metal in the muscles not exceeded the acceptable levels for a food source for human consumption.     

Monsoonal differences and probability distribution of PM10 concentration

There are many factors that influence PM₁₀ concentration in the atmosphere. This paper will look at the PM₁₀ concentration in relation with the wet season (north east monsoon) and dry season (south west monsoon) in Seberang Perai, Malaysia from the year 2000 to 2004. It is expected that PM₁₀ will reach the peak during south west monsoon as the weather during this season becomes dry and this study has proved that the highest PM₁₀ concentrations in 2000 to 2004 were recorded in this monsoon. Two probability distributions using Weibull and lognormal were used to model the PM₁₀ concentration. The best model used for prediction was selected based on performance indicators. Lognormal distribution represents the data better than Weibull distribution model for 2000, 2001, and 2002. However, for 2003 and 2004, Weibull distribution represents better than the lognormal distribution. The proposed distributions were successfully used for estimation of exceedences and predicting the return periods of the sequence year.     

Green synthesis of metal nanoparticles using Garcinia extracts: a review

Environmental Chemistry Letters - The demand for nanoparticles has been increasing rapidly in recent years due to their unique properties of interest for a wide range of applications. Several...     

A bibliometric review on the inter-connection between climate change and rice farming

Environmental Science and Pollution Research - Rice is an important cereal and a staple food in many countries in the world. Climate change is a significant challenge that affects paddy production...     

Hybridized Biocomposites from Agro-Wastes: Mechanical,Physical and Thermal Characterization

Agricultural wastes, oil palm trunk (OPT) veneer and oil palm empty fruit bunch (EFB) mat were used for the preparation of hybridized plywood using 250 and 450 g/m² of urea formaldehyde (UF) as gluing agent. The mechanical (flexural strength, flexural modulus, screw withdrawal, shear strength), physical (density, water absorption, thickness swelling and delamination) and thermal (TGA) properties of the biocomposites were studied. Images taken with a scanning electron micrograph (SEM) indicated an improvement in the fiber–matrix bonding for the laminated panel glued with 450 g/m² of UF.