Laboratory degradation studies of bentazone, dichlorprop, MCPA, and propiconazole in Norwegian soils

Laboratory degradation studies were performed in Norwegian soils using two commercial formulations (Tilt and Triagran-P) containing either propiconazole alone or a combination of bentazone, dichlorprop, and MCPA. These soils included a fine sandy loam from Hole and a loam from Kroer, both of which are representative of Norwegian agricultural soils. The third soil was a highly decomposed organic material from the Froland forest. A fourth soil from the Skuterud watershed was used only for propiconazole degradation. After 84 d, less than 0.1% of the initial MCPA concentration remained in all three selected soils. For dichlorprop, the same results were found for the fine sandy loam and the organic-rich soil, but in the loam, 26% of the initial concentration remained. After 84 d, less than 0.1% of the initial concentration of bentazone remained in the organic-rich soil, but in the loam and the fine sandy loam 52 and 69% remained, respectively. Propiconazole was shown to be different from the other pesticides by its persistence. Amounts of initial concentration remaining varied from 40, 70, and 82% in the reference soils after 84 d for the organic-rich soil, fine sandy loam, and loam, respectively. The organic-rich soil showed the highest capacity to decompose all four pesticides. The results from the agricultural soils and the Skuterud watershed showed that the persistence of propiconazole was high. Pesticide degradation was approximated to first-order kinetics. Slow rates of degradation, where more than 50% of the pesticide remained in the soil after the 84-d duration of the experiment, did not fit well with first-order kinetics.     

Effects of Social Structure and Prey Dynamics on Extinction Risk in Gray Wolves

Extinction models based on diffusion theory generally fail to incorporate two important aspects of population biology—social structure and prey dynamics. We include these aspects in an individual-based extinction model for small, isolated populations of the gray wolf (Canis lupus). Our model predicts mean times to extinction significantly longer than those predicted by more general (diffusion) models. According to our model, an isolated population of 50 wolves has a 95% chance of surviving just 9 years and only a 30% chance of surviving beyond 100 years. Reflecting the influence of social structure, a wolf population initially comprising 50 individuals is expected to persist only a few years longer, on average (71 years), than is a population initially comprising just a single reproductive pair (62 years). In contrast, substantially greater average prey abundance leads to dramatically longer expected persistence times. Autocorrelated prey dynamics result in a more complex distribution of extinction times than predicted by many extinction models. We contend that demographic stochasticity may pose the greatest threat to small, isolated wolf populations, although environmental stochasticity and genetic effects may compound this threat. Our work highlights the importance of considering social structure and resource dynamics in the development of population viability analyses.     

CAN SCRAP SAVE US FROM DEPLETION?

Old scrap constitutes varied proportions of consumption of different metals. The authors construct a model in which the share of scrap in total supply is explained by three factors, the growth rate in overall demand for the metal; the share of metal contained in scrapped products actually recovered; and the durability of metal containing products. The model is used to study the impact on the share of scrap in total supply from changes in each of the factors. The strongest impact appears to follow from changes in the growth rate of overall demand. Inserting empirical data for copper into their model, the authors suggest, for instance, that in the long run old scrap could satisfy 100 per cent of copper demand, provided that this demand contracted by 1 per cent per year. La ferraille constitue des proportions variées d'utilisation de différents métaux. Les auteurs de cet article ont construit un modèle dans lequel la part de ferraille dans 'approvisionnement total est expliquée par le jeu de trois facteurs: le taux de croissance de la demande globale pour le métal, la part de métal contenue dans des débris de métaux effectivement récupérés et la durabilité des métaux renfermant des produits. Le modèle est utilisé pour étudier les incidences des changements dans chacun des facteurs sur la part de ferraille dans 'offre totale. L'incidence la plus importante semble provenir de modifications dans le taux de croissance de la demande globale. En introduisant des données empiriques pour le cuivre dans leur modèle, les auteurs suggèrent par exemple, qu' à longue échéance, la ferraille pourrait répondre à la demande totale en cuivre pourvu que cette demande se réduise d'un pour cent par année. El uso de chatarra representa una proporción variable del consumo de los diferentes metales. En este artículo los autores presentan un modelo en el que la proción de la chatarra en la oferta de un metal depende de tres factores: la tasa de crecimiento de la demanda global del metal, la proción del metal contenido en la chatarra recuperada, y la durabilidad o vida económica de los productos que contienen el metal en cuestión. El modelo se utiliza para estudiar el impacto sobre la proporción de chatarra en la oferta total causado por las variaciónes de cada uno de estos factores. El mayor impacto parece ocurrir debido al cambio en la tasa de crecimiento de la demands global. Al utilizar el modelo con datos para el cobre, los autores sugieren, por ejemplo, que en el largo plazo la chatarra de cobre podría satisfacer el cien por ciento de la demanda de este metal siempre que dicha demanda se contraigo en uno por ciento por año.     

Revalorization of Macadamia nutshell residue as a filler in eco-friendly castor polyol-based polyurethane foam

Journal of Material Cycles and Waste Management - The use of lignocellulosic fibers as fillers in polymer matrices has aroused the interest of the scientific community and industrial sectors. In...     

Remediation of contaminated land and groundwater: experience in England and Wales

Remediation of contaminated land and groundwater is of common international concern. The context and approach taken to the problem are, however, country-specific. A survey of remedial activity occurring within England and Wales over the period 1996-1999 was commissioned by the Environment Agency (for England and Wales) to establish a baseline against which future trends in remedial activity could be judged. This paper: explains the context of contaminated land and groundwater remediation in England and Wales (Britain); provides an overview of the 1996-1999 survey of remedial activity, discussing its findings within its legislative and institutional context; and, discusses the survey results of significance to the management of contaminated land and groundwater internationally. The survey obtained specific data from 367 remediated sites supplemented by general data from a further 1189 contaminated (not necessarily remediated) sites. The survey aimed to be, and was indicative of remediation practice, and did not seek to identify every remediation scheme operating. Previous anecdotal evidences were generally confirmed. Civil engineering-based techniques dominated and were used at 94% of sites with in situ techniques (predominantly vapour extraction-based) on 16% and ex situ on just 5%. Although disposal to landfill was dominant and occurred at over 80% of sites, integrated use of multiple techniques was common. Remediation was predominantly of soil (rather than water), development-based, designed to protect human health and reflected national development-led and 'suitable for use' policies. Lessons of international relevance from the survey and general British experience are drawn concerning remediation technique selection, regulatory and financial support of innovative remediation techniques and demonstration sites, competent use of risk-based approaches to allow pragmatic remediation and effective use of quality guidelines, need for effective guidance to highlight water quality issues, the necessity of post remediation monitoring to prove remediation effectiveness and the keeping of remediation databases.     

Do Nutrients Limit Algal Periphyton in Small Blackwater Coastal Plain Streams?1

Abstract: We examine the potential for nutrient limitation of algal periphyton biomass in blackwater streams draining the Georgia coastal plain. Previous studies have investigated nutrient limitation of planktonic algae in large blackwater rivers, but virtually no scientific information exists regarding how algal periphyton respond to nutrients under different light conditions in smaller, low‐flow streams. We used a modification of the Matlock periphytometer (nutrient‐diffusing substrata) to determine if algal growth was nutrient limited and/or light limited at nine sites spanning a range of human impacts from relatively undisturbed forested basins to highly disturbed agricultural sites. We employed four treatments in both shaded and sunny conditions at each site: (1) control, (2) N (NO₃‐N), (3) P (PO₄‐P), and (4) N + P (NO₃‐N + PO₄‐P). Chlorophyll a response was measured on 10 replicate substrates per treatment, after 15 days of in situ exposure. Chlorophyll a values did not approach what have been defined as nuisance levels (i.e., 100‐200 mg/m²), even in response to nutrient enrichment in sunny conditions. For Georgia coastal plain streams, algal periphyton growth appears to be primarily light limited and can be secondarily nutrient limited (most commonly by P or N + P combined) in light gaps and/or open areas receiving sunlight.     

Influence of flue-gas desulfurization systems on coal combustion by-product quality at kentucky power stations burning high-sulfur coal

Two Kentucky power plants burning similar blends of high-sulfur western Kentucky and southern Indiana coal provide a unique opportunity to examine the variations in coal combustion by-products due to differences in the method of wet flue-gas desulfurization (FGD). One plant employed carbide lime-based scrubbing for two units and a dual-alkali process for the third unit. The second plant employed a Mississippian limestone from Kentucky for all four units. This study provides an example of optical and SEM petrographic techniques, supplemented by chemical analyses, applied to the study of, at least from the geologic perspective, non-traditional materials. The coal sources comprise a blend of high volatile C and B bituminous, high vitrinite (85–90%, mmf), high-sulfur (> 3%, dry) coals. The fly ash is dominated by glassy phases (70–80%) with about 5–10% spinel (predominately magnetite), 3–10% quartz, and 4–10% isotropic coke comprising the remaining portion of the ash. SEM observations indicate that the glassy particles exhibit a bimodal size distribution with sub-micron glass spheres and a population of larger (several 10s of microns) spheres. The bottom ash has higher proportions of spinels and mullite, with negligible carbon forms, compared to the fly ash from the same units. Fly ashes were observed to be lower in Fe and higher in Al, Si, and S compared to the bottom ashes. Carbide lime, a by-product of acetylene manufacture, soda ash, and limestone were the reagents used in the flue-gas desulfurization processes. The primary FGD by-product is a calcium sulfite slurry which is vacuum filtered and mixed with fly ash and, usually, lime, to form a stable product for disposal. The FGD by-products have some potential, as yet unrealized, for utilization.