Heat budget for a waste lift placed under freezing conditions at a landfill operated in a northern climate

A landfill operated in Ste. Sophie, Québec, Canada was instrumented to better understand the waste stabilization process in northern climates. Instrument bundles were placed within the waste to monitor temperature, settlement, oxygen, moisture content, total load, mounding of leachate and electrical conductivity. A finite element model was developed to simulate the heat budget for the first waste lift placed in the winter months and was calibrated using the first 10.5 months of collected temperature data. The calibrated model was then used to complete a sensitivity analysis for the various parameters that impact the heat budget. The results of the analysis indicated that the heat required for phase change to thaw the liquid fraction within frozen waste had a significant impact on the heat budget causing sections of waste to remain frozen throughout the simulation period. This was supported by the data collected to date at Ste. Sophie and by other researchers indicating that frozen waste placed during the winter months can remain frozen for periods in access of 1.5 years.     

Assessment of the environmental profile of PLA,PET and PS clamshell containers using LCA methodology

Life cycle assessments of bio-based polymer resin and products historically have shown favorable results in terms of environmental impacts and energy use compared to petroleum-based products. However, calculation of these impacts always depends on the system and boundary conditions considered during the study. This paper reports a cradle-to-cradle Life Cycle Assessment (LCA) of poly(lactic acid) (PLA) in comparison with poly(ethylene terephthalate) (PET) and poly(styrene) (PS) thermoformed clamshell containers, used for packaging of strawberries with emphasis on different end-of-life scenarios. It considers all the inputs such as fertilizers, pesticides, herbicides and seed corn required for the growing and harvesting of corn used for manufacturing PLA. For PET and PS, the extraction of crude oil and the entire cracking processes from crude oil through styrene and ethylene glycol and terephathalic acid are considered. Global warming, aquatic acidification, aquatic eutrophication, aquatic ecotoxicity, ozone depletion, non-renewable energy and respiratory organics, land occupation and respiratory inorganics were the selected midpoint impact categories. The geographical scope of the study reflects data from Europe, North America and the Middle East. PET showed the highest overall values for all the impact categories, mainly due to the higher weight of the containers. The main impacts to the environment were the resin production and the transportation stage of the resins and containers. This implies that the transportation stage of the package is an important contributor to the environmental impact of the packaging systems, and that it cannot be diminished.     

The structure of turbulence near a tall forest edge: the backward-facing step flow analogy revisited

Flow disturbances near tall forest edges are receiving significant attention in diverse disciplines including ecology, forest management, meteorology, and fluid mechanics. Current theories suggest that near a forest edge, when the flow originates from a forest into a large clearing, the flow retains its forest canopy turbulence structure at the exit point. Here, we propose that this framework is not sufficiently general for dense forested edges and suggest that the flow shares several attributes with backward-facing step (BFS) flow. Similar analogies, such as rotor-like circulations, have been proposed by a number of investigators, though the consequences of such circulations on the primary terms in the mean momentum balance at the forest clearing edge have rarely been studied in the field. Using an array of three triaxial sonic anemometers positioned to measure horizontal and vertical gradients of the velocity statistics near a forest edge, we show that the flow structure is more consistent with an intermittent recirculation pattern, rather than a continuous rotor, whose genesis resembles the BFS flow. We also show that the lateral velocity variance, v'2, is the moment that adjusts most slowly with downwind distance as the flow exits from the forest into the clearing. Surprisingly, the longitudinal and vertical velocity variances (u'2 and w'2) at the forest edge were comparable in magnitude to their respective values at the center of a large grass-covered forest clearing, suggesting rapid adjustment at the edge. Discussions on how the forest edge modifies the spectra and co-spectra of momentum fluxes, effective mixing length, and static pressure are also presented.     

Adopting and applying eco-design techniques: a practitioners perspective

This paper discusses the findings of a small scale research project which explored the possibility of adopting eco-design techniques. The paper focuses on identifying how eco-design techniques can be determined as being compatible with new product development processes. Via the development of a five stage ‘applicability framework’, this study demonstrates how a compatible suite of tools can be identified for application to product development processes. Testing and validation of this ‘applicability framework’, which was used to identify three key eco-design techniques; namely checklists, guidelines, and a material, energy and toxicity (MET) matrix, is shown to have taken place in relation to the development of a lightweight chemical detector product. It is established that checklists, guidelines and the MET matrix can be used both on a specific product, and also more generally in the design process. In particular, the MET matrix is shown as being used to successfully identify key environmental aspects of the product during its lifetime. The paper concludes by arguing that eco-design techniques may not have been more widely adopted by businesses because such methods are not necessarily generic and immediately applicable, but instead require some form of process-specific customisation prior to use, which can in turn act as a barrier to adoption. It is also highlighted that the shear diversity of pressures that come to bear during the product development process can also act as a barrier to adoption, and that the full integration of eco-design techniques will have to encompass approaches which overcome such pressures.     

Use of wastewater and compost extracts as nutrient sources for growing nursery and turfgrass species

Nutrient salts present in liquid by-products following waste treatment are lost resources if not effectively recycled, and can cause environmental problems if improperly disposed. This research compared the growth response and mineral nutrient status of two nursery and two turfgrass species, hydroponically supplied with nutritive by-product extracts derived from anaerobically digested municipal solid waste (MSW) and aerobically composted organic wastes from the mushroom and MSW industries. Forsythia (Forsythia x intermedia 'Lynwood') and weigela (Weigela florida 'Red Prince'), and creeping bentgrass (Agrostis palustris Huds.) and Kentucky bluegrass (Poa pratensis L.), were grown in nutrient solutions/extracts prepared from: (i) half-strength Hoagland's #2 solution (HH; control), (ii) Plant Products liquid fertilizer (PP; g kg(-1): 180 N; 39 P; 224 K), (iii) spent mushroom compost (SMC), (iv) MSW compost (GMC), and (v) intra-process wastewater from the anaerobic digestion of MSW (ADW). Additional nutrient solutions (SMC-A, GMC-A, and ADW-A) were prepared by amending the original solutions with N, P, and/or K to concentrations in HH (mg L(-1): 105 N; 15 P; 118 K). Plants receiving the SMC-A extract grew best or at least as well as those in HH, PP, and the amended GMC-A and ADW-A solutions. This study indicated that, with proper amendments of N, P, K and other nutrients, water-soluble constituents derived from organic waste treatment have potential for use as supplemental nutrient sources for plant production.     

Detection and Sequencing of Multiple Human Norovirus Genotypes from Imported Frozen Raspberries Linked to Outbreaks in the Province of Quebec,Canada, in 2017

Food and Environmental Virology - Human noroviruses are among the main causes of acute gastroenteritis worldwide. Frozen raspberries have been linked to several norovirus food-related outbreaks....     

Sediment and porewater geochemistry in a metal contaminated estuary,Dulas Bay,Anglesey

Remobilisation of contaminant metals from sediments can occur by chemical, biological or physical changes. This in turn can lead to contaminant fluxes to the porewaters and ultimately the water column. The aim of the research presented here is to document post-depositional controls on metal mobility and fluxes in a heavily metal-contaminated estuary. This will allow for an improved understanding of the impact of contaminated sediments on water quality from both a short-term and long-term perspective. Dulas Bay is situated on the east coast of Anglesey, North Wales, and receives polluted waters from Parys Mountain. Metals within Dulas Bay sediments show surface enrichment and variations in mineralogical form. Diagenesis clearly plays a role in post-depositional behaviour of the metals, forming sulphides and potentially carbonates. The presence of a dominant exchangeable/carbonate fraction, and elevated porewater metals, in this sulphidic system is significant and could indicate the presence of freshwater diagenesis, or, reflect the high levels of metals in the sediment.     

Review of state of the art methods for measuring water in landfills

In recent years several types of sensors and measurement techniques have been developed for measuring the moisture content, water saturation, or the volumetric water content of landfilled wastes. In this work, we review several of the most promising techniques. The basic principles behind each technique are discussed and field applications of the techniques are presented, including cost estimates. For several sensors, previously unpublished data are given. Neutron probes, electrical resistivity (impedance) sensors, time domain reflectometry (TDR) sensors, and the partitioning gas tracer technique (PGTT) were field tested with results compared to gravimetric measurements or estimates of the volumetric water content or moisture content. Neutron probes were not able to accurately measure the volumetric water content, but could track changes in moisture conditions. Electrical resistivity and TDR sensors tended to provide biased estimates, with instrument-determined moisture contents larger than independent estimates. While the PGTT resulted in relatively accurate measurements, electrical resistivity and TDR sensors provide more rapid results and are better suited for tracking infiltration fronts. Fiber optic sensors and electrical resistivity tomography hold promise for measuring water distributions in situ, particularly during infiltration events, but have not been tested with independent measurements to quantify their accuracy. Additional work is recommended to advance the development of some of these instruments and to acquire an improved understanding of liquid movement in landfills by application of the most promising techniques in the field.