Polychlorinated biphenyls in Narragansett Bay surface sediments

Polychlorinated biphenyls (PCBs) were evaluated in 41 surface sediments collected from Narragansett Bay, RI in 1997-1998. Highest concentrations of total PCBs (1760 ng/g) were in rivers at the head of the bay and the values decreased southward toward the mouth of the bay, with elevated concentrations in some of the coves. The PCB levels in approximately 43% of the samples exceeded the effects range median (ERM) guideline [Environ. Manage. 19 (1995) 81] indicating possible adverse biological effects at these stations. Principal component analysis (PCA) of the surface sediment PCBs separated the Taunton River samples from the rest of the samples. This result suggests that this river has a different PCB composition and sources than the other areas investigated. It also showed that this river has a limited influence on other bay stations as the adjacent samples downstream did not have the same chemical signature. Congener ratios derived from the PCA were useful in distinguishing stations that had different sources of PCBs than the bulk of the bay sediments. Although Aroclor 1268 and 1270 accounted for <1% of all PCB production, their major components, CB206 and CB209, account for 3-6% of the CBs in most bay samples. This may reflect more local use of these Aroclor mixtures and/or be indicative of their relative stability, compared to less chlorinated mixtures. Using linear alkyl benzenes (LABs) as a marker for sewage derived PCBs suggested that up to 95% of the PCBs at the most contaminated sites in the Seekonk, Providence, and Taunton Rivers were sewage derived. This analysis also showed that there is a high background level (167 ng/g) of PCBs in the Seekonk and Providence River, while the Taunton River had a relatively low background level (23.7 ng/g). At the furthest stations south in the Providence River, the sewage derived PCBs only accounted for 23% of the total which suggests that PCB associated with sewage particles are rapidly deposited and are therefore not the most significant source of these compounds to the lower reaches of Narragansett Bay.     

Mobilization of small DNAPL pools formed by capillary entrapment

We performed an experimental study to quantify the critical conditions for the mobilization of small pools of dense nonaqueous phase liquids (DNAPLs) that may form at capillary-heterogeneity boundaries. A series of experiments were conducted in columns packed with uniform sands arranged to create capillary heterogeneities. DNAPL pools readily formed in these packings and were more easily mobilized than trapped DNAPL ganglia. A model was developed to describe the critical conditions for DNAPL pool mobilization. Pool mobilization was expected when a dimensionless pool trapping number N(T)p> 1 while mobilization was observed in our experiments when N(T)p>0.76+/-0.16 (+/- 95% confidence interval). The difference between the model prediction and the experimental observations was attributed to experimental error. Using this model for DNAPL pool mobilization, a simple numerical experiment was conducted to illustrate use of the model and to explore the effect of scale on the critical conditions for pool mobilization. With an increase in system scale flow bypassing around the DNAPL pool increased and the system-averaged conditions for the onset of mobilization changed: a greater system-average Darcy flux or lower interfacial tensions were required for DNAPL pool mobilization. This result illustrates the importance of system scale on mobilization of DNAPL pools in systems with capillary heterogeneities.     

Comparisons of the dust/smoke particulate that settled inside the surrounding buildings and outside on the streets of southern New York City after the collapse of the World Trade Center, September 11, 2001

The collapse of the World Trade Center (WTC) on September 11, 2001, generated large amounts of dust and smoke that settled in the surrounding indoor and outdoor environments in southern Manhattan. Sixteen dust samples were collected from undisturbed locations inside two uncleaned buildings that were adjacent to Ground Zero. These samples were analyzed for morphology, metals, and organic compounds, and the results were compared with the previously reported outdoor WTC dust/smoke results. We also analyzed seven additional dust samples provided by residents in the local neighborhoods. The morphologic analyses showed that the indoor WTC dust/smoke samples were similar to the outdoor WTC dust/smoke samples in composition and characteristics but with more than 50% mass in the <53-microm size fraction. This was in contrast to the outdoor samples that contained >50% of mass above >53 microm. Elemental analyses also showed the similarities, but at lower concentrations. Organic compounds present in the outdoor samples were also detected in the indoor samples. Conversely, the resident-provided convenience dust samples were different from either the WTC indoor or outdoor samples in composition and pH, indicating that they were not WTC-affected locations. In summary, the indoor dust/smoke was similar in concentration to the outdoor dust/smoke but had a greater percentage of mass <53 microm in diameter.     

Petroleum hydrocarbons and polycyclic aromatic hydrocarbons in the surficial sediments of Xiamen Harbour and Yuan Dan Lake, China

Surficial sediments were sampled from nine stations in Xiamen Harbour and two stations in Yuan Dan Lake during April 2002. Sediment samples were extracted by organic solvents, separated by silica gel column chromatography and analyzed by gas chromatography-mass selective detector (GC-MSD). Selected ion monitoring was at M/Z=57 for petroleum hydrocarbons (PHCs) and individual M/Zs for each of the 15 typical polycyclic aromatic hydrocarbons (PAHs) and nine alkylated PAHs. The results showed that concentrations of PHCs and total PAHs in the sediments of Yuan Dan Lake were 1397 microg g(-1) (dry weight, dw) and 1377 ng g(-1) (dw), respectively. The ranges for PHCs and total PAHs in the sediments from Xiamen Harbour were 133-943 microg g(-1) (dw) and 98-309 ng g(-1) (dw), respectively. Shipping activities, industrial wastewater discharges, fuel oil spillage from ships and vehicles were the main sources of PHCs and PAHs in the Harbour. In addition, the widespread use of coal for industrial processes and domestic consumption accounted for the second largest source of PAHs in the sediments, while atmospheric transport and deposition of PAHs are also important.     

Effects of soiling and cleaning on the reflectance and solar heat gain of a light-colored roofing membrane

A roof with high solar reflectance and high thermal emittance (e.g., a white roof) stays cool in the sun, reducing cooling power demand in a conditioned building and increasing summertime comfort in an unconditioned building. The high initial solar reflectance of a white membrane roof (circa 0.8) can be lowered by deposition of soot, dust, and/or biomass (e.g., fungi or algae) to about 0.6; degraded solar reflectances range from 0.3 to 0.8, depending on exposure. We investigate the effects of soiling and cleaning on the solar spectral reflectances and solar absorptances of 15 initially white or light-gray polyvinyl chloride membrane samples taken from roofs across the United States. Black carbon and organic carbon were the two identifiable strongly absorbing contaminants on the membranes. Wiping was effective at removing black carbon, and less so at removing organic carbon. Rinsing and/or washing removed nearly all of the remaining soil layer, with the exception of (a) thin layers of organic carbon and (b) isolated dark spots of biomass. Bleach was required to clear these last two features. At the most soiled location on each membrane, the ratio of solar reflectance to unsoiled solar reflectance (a measure of cleanliness) ranged from 0.41 to 0.89 for the soiled samples; 0.53 to 0.95 for the wiped samples; 0.74 to 0.98 for the rinsed samples; 0.79 to 1.00 for the washed samples; and 0.94 to 1.02 for the bleached samples. However, the influences of membrane soiling and cleaning on roof heat gain are better gauged by fractional variations in solar absorptance. Solar absorptance ratios (indicating solar heat gain relative to that of an unsoiled membrane) ranged from 1.4 to 3.5 for the soiled samples; 1.1 to 3.1 for the wiped samples; 1.0 to 2.0 for the rinsed samples; 1.0 to 1.9 for the washed samples; and 0.9 to 1.3 for the bleached samples.     

Coping with uncertainty: a call for a new science-policy forum

The scientific and policy worlds have different goals, which can lead to different standards for what constitutes "proof" of a change or phenomena, and different approaches for characterizing and conveying uncertainty and risk. These differences can compromise effective communication among scientists, policymakers, and the public, and constrain the types of socially compelling questions scientists are willing to address. In this paper, we review a set of approaches for dealing with uncertainty, and illustrate some of the errors that arise when science and policy fail to coordinate correctly. We offer a set of recommendations, including restructuring of science curricula and establishment of science-policy forums populated by leaders in both arenas, and specifically constituted to address problems of uncertainty.     

Relationship between hydrocarbon measurements and toxicity to a chironomid, fish larva and daphnid for oils and oil spill chemical treatments in laboratory freshwater marsh microcosms

This research investigated the extent to which various common hydrocarbon measures can be used to predict toxicity to freshwater aquatic organisms due to fouling by oil. Actual toxicity results, on laboratory freshwater marsh microcosms using two water-column species and a benthic species, were described earlier. The hydrocarbon measures used were TPH(g), TPH(FID), TPH(MS), TTAH (sum of 41 target aromatic hydrocarbons), principal components of 41 TAHs, and each individual TAH. In general, toxicity was more closely related to TPH(MS) levels than to TPH(FID) and (especially) TPH(g) levels. The strongest relationships were found for TTAH levels and for the principal components of the TAHs. Regressions of toxicity on many individual TAHs were also strong, with a single group of compounds explaining as much as 59% of the variation in survival. While the various regressions were highly significant statistically and at times able to accurately predict broad differences in toxicity, the high variation in survival at a specific hydrocarbon concentration indicates that these hydrocarbon measures can not substitute for actual toxicity determinations in accurately ranking the toxicity of samples from oiled freshwater marshes.