Habitat specialization and the exploitation of allochthonous carbon by zooplankton

The significance of spatial subsidies depends on consumer resource interactions in the recipient habitat. Lakes are subsidized by terrestrial carbon sources, but the pathways of allochthonous carbon through lake food webs are complex and not well understood. Zooplankton vertically partition resources within stratified lakes in response to life history trade-offs that are governed by predators, the quantity and quality of food, and abiotic conditions (e.g., UV, temperature, and viscosity). We measured habitat specialization of zooplankton in an oligotrophic lake where allochthonous and autochthonous resources varied with depth. During stratification, the quantity and quality of zooplankton food was highest in the hypolimnion. We used a yearlong time series of the delta13C of zooplankton and particulate organic matter (POM) to determine which zooplankton species exploited hypolimnetic rather than epilimnetic resources. Because the delta13C of POM decreased with depth, we used the delta13C of zooplankton to detect inter- and intraspecific variation in habitat selection. We incubated Daphnia pulex at discrete depths in the water column to confirm that the delta13C of zooplankton can indicate habitat specialization. Zooplankton that specialized in the epilimnion relied more on allochthonous carbon sources than those that specialized in the hypolimnion. Therefore, the fate of allochthonous carbon subsidies to lakes depends on spatially explicit consumer-resource interactions.     

Isomeric analysis of PCDD/PCDF in waste incinerator fly ash by GC-MS/MS

The development of an analytical method for the analysis of PCDD/PCDF in flyash using a bench analytical system comprising of a gas chromatograph fitted with an ion trap detector operated in the tandem MS mode is described. The optimum settings for the most important MS/MS parameters are given, including those for the less reported mono- to tri-chlorinated dioxin and furan congener groups. Flyash samples from three waste incineration plants representing a decommissioned 1970s plant design, an upgraded and still operating plant originally designed in the 1970s, and a modern 1990s design operating plant have been analysed for PCDD/PCDF. The flyash samples were analysed for PCDD/PCDF using the methods developed and the total PCDD/PCDF, I-TEQ values and isomeric profiles are reported. The flyash from the older decommissioned incinerator had very significantly higher concentrations of PCDD/PCDF compared to the modern incinerator flyash.     

Sorption of organic compounds to activated carbons. Evaluation of isotherm models

Sorption to ‘hard carbon’ (black carbon, coal, kerogen) in soils and sediments is of major importance for risk assessment of organic pollutants. We argue that activated carbon (AC) may be considered a model sorbent for hard carbon. Here, we evaluate six sorption models on a literature dataset for sorption of 12 compounds onto 12 ACs and one charcoal, at different temperatures (79 isotherms in total). A statistical analysis, accounting for differences in the number of fitting parameters, demonstrates that the dual Langmuir equation is in general superior and/or preferable to the single and triple Langmuir equation, the Freundlich equation, a Polanyi–Dubinin–Manes equation, and the Toth equation. Consequently, the analysis suggests the presence of two types of adsorption sites: a high-energy (HE) type of site and a low-energy (LE) type of site. Maximum adsorption capacities for the HE domain decreased with temperature while those for the LE domain increased. Average Gibbs free energies for adsorption from the hypothetical pure liquid state at 298 K were fairly constant at −15 ± 4 and −5 ± 4 kJ mol⁻¹ for the HE and LE domain, respectively.     

Distribution and transportability of hexabromocyclododecane (HBCD) in the Asia-Pacific region using skipjack tuna as a bioindicator

The geographical distribution of hexabromocyclododecane (HBCD) was investigated through analysis of muscle tissue of skipjack tuna (Katsuwonus pelamis) collected from offshore waters of Asia-Pacific region (Japan, Taiwan, Philippines, Indonesia, Seychelles, Brazil, Japan Sea, East China Sea, South China Sea, Indian Ocean and North Pacific Ocean). HBCD was detected in almost all samples analyzed (<0.1 to 45 ng/g lipid weight basis), indicating widespread presence of this compound in the marine environment. Elevated concentrations of HBCD were found in skipjack tuna from areas around Japan, which have the larger modern industrial/urban societies, and implicated these areas as primary regional sources. All three individual HBCD isomers (alpha-, gamma- and beta-HBCD) were detected in almost all samples; the percentage contribution of the alpha-isomer to total HBCD increased with increasing latitude. The estimated empirical 1/2 distance for alpha-HBCD was 8500 km, which is one of the highest atmospheric transportability among various halogenated persistent organic pollutants (POPs).     

Hydrogen sulfide generation in simulated construction and demolition debris landfills: impact of waste composition

Hydrogen sulfide (H2S) generation in construction and demolition (C&D) debris landfills has been associated with the biodegradation of gypsum drywall. Laboratory research was conducted to observe H2S generation when drywall was codisposed with different C&D debris constituents. Two experiments were conducted using simulated landfill columns. Experiment 1 consisted of various combinations of drywall, wood, and concrete to determine the impact of different waste constituents and combinations on H2S generation. Experiment 2 was designed to examine the effect of concrete on H2S generation and migration. The results indicate that decaying drywall, even alone, leached enough sulfate ions and organic matter for sulfate-reducing bacteria (SRB) to generate large H2S concentrations as high as 63,000 ppmv. The codisposed wastes show some effect on H2S generation. At the end of experiment 1, the wood/drywall and drywall alone columns possessed H2S concentrations > 40,000 ppmv. Conversely, H2S concentrations were < 1 ppmv in those columns containing concrete. Concrete plays a role in decreasing H2S by increasing pH out of the range for SRB growth and by reacting with H2S. This study also showed that wood lowered H2S concentrations initially by decreasing leachate pH values. Based on the results, two possible control mechanisms to mitigate H2S generation in C&D debris landfills are suggested.     

Transport and dispersion during wintertime particulate matter episodes in the San Joaquin Valley, California

Data analysis and modeling were performed to characterize the spatial and temporal variability of wintertime transport and dispersion processes and the impact of these processes on particulate matter (PM) concentrations in the California San Joaquin Valley (SJV). Radar wind profiler (RWP) and radio acoustic sounding system (RASS) data collected from 18 sites throughout Central California were used to estimate hourly mixing heights for a 3-month period and to create case studies of high-resolution diagnostic wind fields, which were used for trajectory and dispersion analyses. Data analyses show that PM episodes were characterized by an upper-level ridge of high pressure that generally produced light winds through the entire depth of the atmospheric boundary layer and low mixing heights compared with nonepisode days. Peak daytime mixing heights during episodes were -400 m above ground level (agl) compared with -800 m agl during nonepisodes. These episode/nonepisode differences were observed throughout the SJV. Dispersion modeling indicates that the range of influence of primary PM emitted in major population centers within the SJV ranged from -15 to 50 km. Trajectory analyses revealed that little intrabasin pollutant transport occurred among major population centers in the SJV; however, interbasin transport from the northern SJV and Sacramento regions into the San Francisco Bay Area (SFBA) was often observed. In addition, this analysis demonstrates the usefulness of integrating RWP/RASS measurements into data analyses and modeling to improve the understanding of meteorological processes that impact pollution, such as aloft transport and boundary layer evolution.     

Relative accuracy testing of an X-ray fluorescence-based mercury monitor at coal-fired boilers

The relative accuracy (RA) of a newly developed mercury continuous emissions monitor, based on X-ray fluorescence, was determined by comparing analysis results at coal-fired plants with two certified reference methods (American Society for Testing and Materials [ASTM] Method D6784-02 and U.S. Environment Protection Agency [EPA] Method 29). During the first determination, the monitor had an RA of 25% compared with ASTM Method D6784-02 (Ontario Hydro Method). However, the Ontario Hydro Method performed poorly, because the mercury concentrations were near the detection limit of the reference method. The mercury in this exhaust stream was primarily elemental. The second test was performed at a U.S. Army boiler against EPA Reference Method 29. Mercury and arsenic were spiked because of expected low mercury concentrations. The monitor had an RA of 16% for arsenic and 17% for mercury, meeting RA requirements of EPA Performance Specification 12a. The results suggest that the sampling stream contained significant percentages of both elemental and oxidized mercury. The monitor was successful at measuring total mercury in particulate and vapor forms.     

Measurement of estrogenic activity in sediments from Haihe and Dagu River, China

Sediments from two rivers in China, the Haihe and Dagu Rivers, were examined for estrogenic activity using an estrogen receptor (ER)-mediated in vitro bioassay system. ER-active compounds were isolated from sediments by Soxhlet extraction, and the crude extracts were fractionated using a florisil column into three fractions. The estrogenic activity of each extract was detected by measuring luciferase activity in the human breast cancer cell line MCF-7 transfected with a luciferase receptor gene. Significant estrogenic activity was observed in each total extract. The 17beta-estradiol equivalents (E2-EQs) ranged from 8.24 to 95.28 ng E2 g(-1) dw. As a result, the relative estrogenic potencies of three fractions in this study descended in the order of Fraction 3>Fraction 2>Fraction 1. The results of the bioassay analysis indicated the heavy pollution status of these sites with estrogenic contaminants. In this study, five selected chemicals, the natural estrogens 17beta-estradiol (E2) and estrone (E1), and the xeno-estrogens 4-octylphenol (OP), 4-nonylphenol (NP), and Bisphenol A (BPA) were also analyzed using the in vitro bioassay. The estrogenic activity of these chemicals were E2>E1>NP>OP>BPA.     

Helping small businesses implement toxics use reduction techniques: dry cleaners, auto shops, and floor finishers assisted in creating safer and healthier work places

The Toxics Use Reduction Institute (TURI), Boston Public Health Commission (BPHC), and Vietnamese American Initiative for Development (Viet-AID) have worked with small business sectors to reduce their use of toxic chemicals. Three cases, described here, in dry cleaning, auto shops and floor finishing share common approaches for creating successful models of effective dissemination of toxics use reduction in small businesses. These include direct business support, peer-to-peer training and promotion of alternatives, and collaborations with stakeholders to achieve greener businesses. These results were achieved despite predictable barriers of lack of resources, suspicion of safer alternatives, and language and cultural barriers.     

Groundwater Remediation via Marcro Porous Polymer Extraction

Akzo Nobel's Macro Porous Polymer Extraction (MPPE) technology effectively removes dissolved hydrocarbons from groundwater via liquid-liquid extraction with an innovative medium. Excellent performance in removal of chlorinated, aromatic, and aliphatic solvents, coupled with simple, robust design, make MPPE an attractive process for groundwater remediation applications. Hydrocarbon-contaminated water is passed through a column packed with MPPE particles. An extraction fluid, immobilized within the polymer matrix, removes the hydrocarbons from the water. All hydrocarbons with affinity for the extraction fluid (compared to water) are removed. Regeneration is accomplished in situ with low-pressure steam. The steam volatilizes the hydrocarbons but not theimmobilized extraction fluid. Volatilized hydrocarbons are condensed and then separated from condensate by gravity. The hydrocarbon product is available for recycle or reuse. MPPE systems achieve removal efficiencies of 99.99 percent for wide varieties and combinations of aliphatic, aromatic, and chlorinated compounds. For a broad range of mass loadings and effluent requirements, especially rigorous ones, the MPPE system offers lower investment and operating costs than traditional water treatment technologies. Currently, 14 industrial units are running or under construction in the United States and Europe. Eight of these are treating groundwater.