The influence on the radioxenon background during the temporary suspension of operations of three major medical isotope production facilities in the Northern Hemisphere and during the start-up of another facility in the Southern Hemisphere

Medical isotope production facilities (MIPF) have recently been identified to emit the major part of the environmental radioxenon measured at many globally distributed monitoring sites deployed to strengthen the radionuclide component of the Comprehensive Nuclear-Test-Ban Treaty (CTBT) verification regime. Efforts to raise a global radioxenon emission inventory revealed that the yearly global total emission from MIPF’s is around 15 times higher than the total radioxenon emission from nuclear power plants (NPP's).Given that situation, from mid 2008 until early 2009 two out of the ordinary hemisphere-specific events occured:1) In the Northern hemisphere, a joint temporary suspension of operations of the three largest MIPF's made it possible to quantify the effects of the emissions related to NPP’s. The average activity concentrations of ¹³³Xe measured at a monitoring station close to Freiburg, Germany, went down significantly from 4.5 ± 0.5 mBq/m³ to 1.1 ± 0.1 mBq/m³ and in Stockholm, Sweden, from 2.0 ± 0.4 mBq/m³ to 1.05 ± 0.15 mBq/m³.2) In the Southern hemisphere the only radioxenon-emitting MIPF in Australia started up test production in late November 2008. During eight test runs, up to 6.2 ± 0.2 mBq/m³ of ¹³³Xe was measured at the station in Melbourne, 700 km south-west from the facility, where no radioxenon had been observed before, originating from the isotopic production process.This paper clearly confirms the hypothesis that medical isotope production facility are at present the major emitters of radioxenon to the atmosphere. Suspension of operations of these facilities indicates the scale of their normal contribution to the European radioxenon background, which decreased two to four fold. This also gives a unique opportunity to detect and investigate the influence of other local and long distance sources on the radioxenon background. Finally the opposing effect was studied: the contribution of the start-up of a renewed radiopharmaceutical facility to the build up of a radioxenon background across Australia and the Southern hemisphere.     

Flow and contaminant transport in an airliner cabin induced by a moving body: Model experiments and CFD predictions

The effects of a moving human body on flow and contaminant transport inside an aircraft cabin were investigated. Experiments were performed in a one-tenth scale, water-based model. The flow field and contaminant transport were measured using the Particle Image Velocimetry (PIV) and Planar Laser-Induced Fluorescence (PLIF) techniques, respectively. Measurements were obtained with (ventilation case) and without (baseline case) the cabin environmental control system (ECS). The PIV measurements show strong intermittency in the instantaneous near-wake flow. A symmetric downwash flow was observed along the vertical centerline of the moving body in the baseline case. The evolution of this flow pattern is profoundly perturbed by the flow from the ECS. Furthermore, a contaminant originating from the moving body is observed to convect to higher vertical locations in the presence of ventilation. These experimental data were used to validate a Computational Fluid Dynamic (CFD) model. The CFD model can effectively capture the characteristic flow features and contaminant transport observed in the small-scale model.     

Modelling contra-flow in crowd dynamics DEM simulation

This paper highlights the growing need for a realistic crowd simulation in the design of large venues such as concert halls and stadia. A discrete element method (DEM) technique for modelling crowd dynamics has been developed that represents each person within the model as 3 overlapping circles, a position, orientation and velocity in 2D. Contact forces between elements are included in the model as well as psychological forces, motive forces and moments. The motion of each person is then modelled in a Newtonian manner with a numerical integration time-stepping scheme. The model has been shown previously to work well in predicting egress. In this paper the predicted model behaviour is compared to actual video footage shot at various locations around University Park Campus, Nottingham. It did not match well to the video footage when people are moving towards each other, as in cases of contra-flow on a walkway. In order to improve the model, a general algorithm for ‘avoidance’ was included which appeared to make the model significantly more realistic in these cases. The paper also shows areas for further potential development, such as incorporating people into associative groups such as family or friends.     

An empirical examination of the role of attributions in psychological entitlement and its outcomes

Psychological entitlement refers to the phenomenon in which individuals consistently believe that they deserve preferential rewards and treatment, often with little consideration of actual qualities or performance levels. This study examines the influence of psychological entitlement on workplace outcomes, using attribution theory to explain its effects. Results suggested that entitlement perceptions are positively associated with self‐serving attribution styles and that diminished need for cognition mediates this relationship. Self‐serving attribution styles, in turn, were associated with reduced job satisfaction and increased levels of conflict with supervisors. A direct positive relationship between psychological entitlement and turnover intent was also observed. Overall, results suggest that an attributional perspective is useful in explaining and understanding the influence of entitlement perceptions on workplace outcomes. Copyright © 2008 John Wiley & Sons, Ltd.     

Assessment Tools for Urban Catchments: Developing Stressor Gradients1

Abstract: This is the first in a series of three articles designed to establish empirically defined biological indicators and thresholds for impairment for urbanized catchments, and to describe a process by which the biological condition of waterbodies in urbanized catchments can be applied. This article describes alternative gradients of urbanization for assessing and selecting a nationally applicable biological index (article 2 – Purcell et al., this issue ) and defining the potential of biological communities within a gradient of cumulative stressors (article 3 – Paul et al. this issue ). Gradients were designed to represent the most prominent mosaic of stressors found in urban settings. A primary urban gradient was assembled based on readily obtained information of urbanization to include three broad‐scale parameters: percent urban land use/land cover, population density, and road density. This gradient was used as the standard by which alternative urban gradients, which included fine‐scale instream chemical and hydrologic parameters, were assessed. Five alternative gradients were developed to provide numerous environmental management options based on availability of data from water program resources. The urban gradients were developed with the intent that they be applied throughout the country; therefore, data from three different regions of the United States (Mid‐Atlantic, Midwest, and Pacific Coast) were used to validate the urban gradient model. Our study showed that a relatively straightforward stressor gradient consisting of human population density, road density, and urban land use is useful in providing a framework for developing relevant biological indicators and evaluating the potential of biological communities as a basis for assessing attainment of designated aquatic life use.     

The acceptability of CO2 capture and storage (CCS) in Europe: An assessment of the key determining factors: Part 1. Scientific,technical and economic dimensions

The ACCSEPT project, which ran from January 2006 to December 2007, identified and analysed the main factors which have been influencing the emergence of CO₂ capture and geological storage (CCS) within the European Union (EU). The key clusters of factors concern science and technology, law and regulation, economics, and social acceptance. These factors have been analysed through interviews, a large-scale questionnaire conducted in 2006, and discussions in two stakeholder workshops (2006 and 2007). In Part I of this paper, we aim to distil the key messages and findings with regards to scientific, technical, legal and economic issues. There are no compelling scientific, technical, legal, or economic reasons why CCS could not be widely deployed in the forthcoming decades as part of a package of climate change mitigation options. In order to facilitate this deployment, governments at both the EU and Member State levels have an important role to play, in particular in establishing a robust and transparent legal framework (e.g. governing long-term environmental liability) and a strong policy framework providing sufficient and long-term incentives for CCS and CO₂ transportation networks.     

Arsenic and copper stabilisation in a contaminated soil by coal fly ash and green waste compost

In situ metal stabilisation by amendments has been demonstrated as an appealing low-cost remediation strategy for contaminated soil. This study investigated the short-term leaching behaviour and long-term stability of As and Cu in soil amended with coal fly ash and/or green waste compost. Locally abundant inorganic (limestone and bentonite) and carbonaceous (lignite) resources were also studied for comparison. Column leaching experiments revealed that coal fly ash outperformed limestone and bentonite amendments for As stabilisation. It also maintained the As stability under continuous leaching of acidic solution, which was potentially attributed to high-affinity adsorption, co-precipitation, and pozzolanic reaction of coal fly ash. However, Cu leaching in the column experiments could not be mitigated by any of these inorganic amendments, suggesting the need for co-addition of carbonaceous materials that provides strong chelation with oxygen-containing functional groups for Cu stabilisation. Green waste compost suppressed the Cu leaching more effectively than lignite due to the difference in chemical composition and dissolved organic matter. After 9-month soil incubation, coal fly ash was able to minimise the concentrations of As and Cu in the soil solution without the addition of carbonaceous materials. Nevertheless, leachability tests suggested that the provision of green waste compost and lignite augmented the simultaneous reduction of As and Cu leachability in a fairly aggressive leaching environment. These results highlight the importance of assessing stability and remobilisation of sequestered metals under varying environmental conditions for ensuring a plausible and enduring soil stabilisation.     

Assessing the hydrocarbon degrading potential of indigenous bacteria isolated from crude oil tank bottom sludge and hydrocarbon-contaminated soil of Azzawiya oil refinery,Libya

The disposal of hazardous crude oil tank bottom sludge (COTBS) represents a significant waste management burden for South Mediterranean countries. Currently, the application of biological systems (bioremediation) for the treatment of COTBS is not widely practiced in these countries. Therefore, this study aims to develop the potential for bioremediation in this region through assessment of the abilities of indigenous hydrocarbonoclastic microorganisms from Libyan Hamada COTBS for the biotreatment of Libyan COTBS-contaminated environments. Bacteria were isolated from COTBS, COTBS-contaminated soil, treated COTBS-contaminated soil, and uncontaminated soil using Bushnell Hass medium amended with Hamada crude oil (1 %) as the main carbon source. Overall, 49 bacterial phenotypes were detected, and their individual abilities to degrade Hamada crude and selected COBTS fractions (naphthalene, phenanthrene, eicosane, octadecane and hexane) were evaluated using MT2 Biolog plates. Analyses using average well colour development showed that ~90 % of bacterial isolates were capable of utilizing representative aromatic fractions compared to 51 % utilization of representative aliphatics. Interestingly, more hydrocarbonoclastic isolates were obtained from treated contaminated soils (42.9 %) than from COTBS (26.5 %) or COTBS-contaminated (30.6 %) and control (0 %) soils. Hierarchical cluster analysis (HCA) separated the isolates into two clusters with microorganisms in cluster 2 being 1.7- to 5-fold better at hydrocarbon degradation than those in cluster 1. Cluster 2 isolates belonged to the putative hydrocarbon-degrading genera; Pseudomonas, Bacillus, Arthrobacter and Brevundimonas with 57 % of these isolates being obtained from treated COTBS-contaminated soil. Overall, this study demonstrates that the potential for PAH degradation exists for the bioremediation of Hamada COTBS-contaminated environments in Libya. This represents the first report on the isolation of hydrocarbonoclastic bacteria from Libyan COTBS and COTBS-contaminated soil.