Variation in and constraints upon the decomposition of woolscour sludge

The woolscouring (wool washing) industry has traditionally been viewed as highly polluting and, consequently, effluent treatment systems have been sought. The first stage in the current treatment system for woolscour wastewater, a chemical flocculation process (Sirolan CF), creates a sludge composed of soil and wool grease. We investigated the chemical and biological characteristics of this sludge. The sludge was found to be highly variable on a day to day basis in terms of its chemical composition and biodegradability; 0.8 to 27.8% of sludge total nitrogen was mineralized over 30 d at 37 degrees C. The grease component of sludge (14-40% on a dry weight basis) may retard the decomposition of the sludge but the polyacrylamide flocculant used in its production and its pesticide content had no effect on the rate of decomposition. Our results suggest that variability in substrate quality may translate into variability in treatment performance and have important implications for the biological treatment of industrial wastes, including composting.     

Transfer of Escherichia coli to water from drained and undrained grassland after grazing

The aim of this study was to determine the load of Escherichia coli transferred via drainage waters from drained and undrained pasture following a grazing period. Higher concentrations (ranging between 10(4) and 10(3) colony forming units [CFU] g(-1)) of E. coli persisted in soil for up to 60 d beyond the point where cattle were removed from the plots, but these eventually declined in the early months of spring to concentrations less than 10(2) CFU g(-1). The decline reflects the combined effect of cell depletion from the soil store through both wash-out and die-off of E. coli. No difference (P > 0.05) was observed in E. coli loads exported from drained and undrained plots. Similarly, no difference (P > 0.05) was observed in E. coli concentrations in drainage waters of mole drain flow and overland plus subsurface interflow. Intermittent periods of elevated discharge associated with storm events mobilized E. coli at higher concentrations (e.g., in excess of 400 CFU mL(-1)) than observed during low flow conditions (often <25 CFU mL(-1)). The combination of high discharge and cell concentrations resulted in the export of E. coli loads from drained and undrained plots exceeding 10(6) CFU L(-1) s(-1). The results highlight the potential for drained land to export E. coli loads comparable with those transferred from undrained pasture.     

Benzoquinones from millipedes deter mosquitoes and elicit self-anointing in capuchin monkeys (Cebus spp.)

Neotropical monkeys of the genus Cebus anoint themselves by rubbing arthropods and plants against their pelage. A recent study has shown that free-ranging wedge-capped capuchin monkeys ( C. olivaceus) in Venezuela self-anoint with a benzoquinone-secreting millipede, an activity by which they are hypothesized to appropriate chemical deterrents of mosquitoes. To evaluate the plausibility of this hypothesis, female yellow fever mosquitoes ( Aedes aegypti) were presented with two millipede secretory compounds, 2-methyl-1,4-benzoquinone and 2-methoxy-3-methyl-1,4-benzoquinone, on nylon-reinforced silicone membranes placed over wells filled with human blood, a highly preferred food. Mosquitoes exhibited fewer landings, fed less frequently, and flew more frequently (a possible indication of repellency) in the presence of membranes treated with benzoquinones than with controls. These compounds also elicit self-anointing in captive male and female tufted ( C. apella) and white-faced ( C. capucinus) capuchin monkeys.     

Measurement of ultrafine particle size distributions from coal-, oil-, and gas-fired stationary combustion sources

Currently, we have limited knowledge of the physical and chemical properties of emitted primary combustion aerosols and the changes in those properties caused by nucleation, condensation growth of volatile species, and particle coagulations under dilution and cooling in the ambient air. A dilution chamber was deployed to sample exhaust from a pilot-scale furnace burning various fuels at a nominal heat input rate of 160 kW/h(-1) and 3% excess oxygen. The formation mechanisms of particles smaller than 420 nm in electrical mobility diameter were experimentally investigated by measurement with a Scanning Mobility Particle Sizer (SMPS) as a function of aging times, dilution air ratios, combustion exhaust temperatures, and fuel types. Particle formation in the dilution process is a complex mixture of nucleation, coagulation, and condensational growth, depending on the concentrations of available condensable species and solid or liquid particles (such as soot, ash) in combustion exhausts. The measured particle size distributions in number concentrations measured show peaks of particle number concentrations for medium sulfur bituminous coal, No. 6 fuel oil, and natural gas at 40-50 nm, 70-100 nm, and 15-25 nm, respectively. For No. 6 fuel oil and coal, the particle number concentration is constant in the range of a dilution air ratio of 50, but the number decreases as the dilution air ratio decreases to 10. However, for natural gas, the particle number concentration is higher at a dilution air ratio of 10 and decreases at dilution air ratios of 20-50. At a dilution air ratio of 10, severe particle coagulation occurs in a relatively short time. Samples taken at different combustion exhaust temperatures for these fuel types show higher particle number concentrations at 645 K than at 450 K. As the aging time of particles increases, the particles increase in size and the number concentrations decrease. The largest gradient of particle number distribution occurs within the first 10 sec after dilution but shows only minor differences between 10 and 80 sec. The lifetimes of the ultrafine particles are relatively short, with a scale on the order of a few seconds. Results from this study suggest that an aging time of 10 sec and a dilution air ratio of 20 are sufficient to obtain representative primary particle emission samples from stationary combustion sources.     

Identification of oxidized TNT metabolites in soil samples of a former ammunition plant

Water extracts of soil samples of the former ammunition plant “Tanne” near Clausthal-Zellerfeld, Lower Saxony, Germany, were investigated for highly polar oxidized 2,4,6-trinitrotoluene (TNT) metabolites. 0.4 to 9.0 mg/kg dry soil 2,4,6-trinitrobenzoic acid (TNBA) and 5.8 to 544 mg/kg dry soil 2-amino-4,6-dinitrobenzoic acid (2-ADNBA) were found. In addition to the oxidized metabolites, TNT, 4- and 2-aminodinitrotoluene (4- and 2-ADNT), and 2,4-dinitrotoluene (2,4-DNT) were extractable with water. Most interestingly, in one sample, 2-ADNBA represented the main contaminant. The origin of the oxidized nitroaromatics is unknown at this time. They might be generated chemically or photochemically. Furthermore, a biological synthesis seems possible.     

The internationalisation of the Australian mineral industry in the 1990s

Overseas mineral exploration and mining investment by Australian companies increased dramatically from the early 1990s until 1997. In the wake of the Asian economic crisis and lower commodity prices it declined somewhat in 1998 and 1999. Reflecting their international competitiveness, Australian resource companies were actively involved in projects in about eighty nations in 1999. This study assesses the extent of growth in exploration and mining operations, the distribution between large and small companies and the changing regional focus which has been occurring. It also reflects on some of the key influences on this development. These include a strong domestic finance sector, supporting mining services provision, technological competitiveness, a growing attractiveness of offshore locations and increasing structural impediments at home.     

South Philadelphia passive sampler and sensor study

From June 2013 to March 2015, in total 41 passive sampler deployments of 2 wk duration each were conducted at 17 sites in South Philadelphia, PA, with results for benzene discussed here. Complementary time-resolved measurements with lower cost prototype fenceline sensors and an open-path ultraviolet differential optical absorption spectrometer were also conducted. Minimum passive sampler benzene concentrations for each sampling period ranged from 0.08 ppbv to 0.65 ppbv, with a mean of 0.25 ppbv, and were negatively correlated with ambient temperature (–0.01 ppbv/°C, R² = 0.68). Co-deployed duplicate passive sampler pairs (N = 609) demonstrated good precision with an average and maximum percent difference of 1.5% and 34%, respectively. A group of passive samplers located within 50 m of a refinery fenceline had a study mean benzene concentration of 1.22 ppbv, whereas a group of samplers located in communities >1 km distant from facilities had a mean of 0.29 ppbv. The difference in the means of these groups was statistically significant at the 95% confidence level (p < 0.001). A decreasing gradient in benzene concentrations moving away from the facilities was observed, as was a significant period-to-period variation. The highest recorded 2-wk average benzene concentration for the fenceline group was 3.11 ppbv. During this period, time-resolved data from the prototype sensors and the open-path spectrometer detected a benzene signal from the west on one day in particular, with the highest 5-min path-averaged benzene concentration measured at 24 ppbv.

Implications: Using a variation of EPA’s passive sampler refinery fenceline monitoring method, coupled with time-resolved measurements, a multiyear study in South Philadelphia informed benzene concentrations near facilities and in communities. The combination of measurement strategies can assist facilities in identification and mitigation of emissions from fugitive sources and improve information on air quality complex air sheds.     

Mind the Costs: Rescaling and Multi-Level Environmental Governance in Venice Lagoon

Competences over environmental matters are distributed across agencies at different scales on a national-to-local continuum. This article adopts a transaction costs economics perspective in order to explore the question whether, in the light of a particular problem, the scale at which a certain competence is attributed can be reconsidered. Specifically, it tests whether a presumption of least-cost operation concerning an agency at a given scale can hold. By doing so, it investigates whether the rescaling of certain tasks, aiming at solving a scale-related problem, is likely to produce an increase in costs for day-to-day agency operations as compared to the status quo. The article explores such a perspective for the case of Venice Lagoon. The negative aspects of the present arrangement concerning fishery management and morphological remediation are directly linked to the scale of the agencies involved. The analysis suggests that scales have been chosen correctly, at least from the point of view of the costs incurred to the agencies involved. Consequently, a rescaling of those agencies does not represent a viable option.