Evaluation of bangkok sewage sludge for possible agricultural use.

Bangkok (Thailand) covers more than 1500 km2 and has 10 million inhabitants. The disposal of wastewater is creating huge problems of pollution. The estimated amount of sewage sludge was estimated to be around 108 tonnes dry matter (DM) per day in 2005. In order to find a lasting way of disposal for this sewage sludge, the suitability of the sludge produced from three waste-water treatment plants for use as fertilizing material was investigated. Monthly samplings and analysis of sewage sludge from each plant showed that the composition of sludge varied according to the area of collection and period of sampling, and there was no link to rainfall cycle. Plant nutrient content was high (i.e. total N from 19 to 38 g kg(-1) DM) whereas organic matter content was low. The concentrations of heavy metals varied between sludge samples, and were sometimes higher than the E.U. or U.S. regulations for sewage sludge use in agriculture. Faecal coliforms were present in the sludge from one of the plants, indicating a possible contamination by night soil. In order to decrease this potentially pathogenic population the sewage sludge should be heated by composting. As the C/N ratio of sewage sludge was low (around 6) some organic by-products with high carbon content could be added as structural material to enhance the composting.     

Development of a life cycle assessment tool for construction and maintenance of asphalt pavements

The increasing use of recycled materials in asphalt pavements calls for environmental assessment of such impacts as the energy input and CO₂ footprint. Life cycle assessment (LCA) is being accepted by the road industry for such purpose. It aims to quantify and collate all the environmental impacts from the life time of the product or process. This paper reviews relevant LCA resources worldwide, identifies the knowledge gap for the road industry, and describes the development of an LCA model for pavement construction and maintenance that accommodates recycling and up-to-date research findings. Details are provided of both the methodology and data acquisition. This is followed by a discussion of the challenges of applying LCA to the pavement construction practice, and recommendations for further work. In the case study, the model is applied to an asphalt paving project at London Heathrow Terminal-5 (LHR), in which natural aggregates were replaced with waste glass, incinerator bottom ash (IBA) and recycled asphalt pavements (RAP). Production of hot mix asphalt and bitumen was found to represent the energy intensive processes. This is followed by data analysis and sensitivity check. Further development of the model includes expanding the database to accommodate the recycling and maintenance practice in the UK, and taking into account the effect that roadwork has on traffic emissions. The LCA model can be further tested and calibrated as a decision support tool for sustainable construction in the road industry.     

Estimation of the nutrient inputs into river systems – experiences from German rivers

The nutrient discharges from point and diffuse sources in more than 200 German river basins were estimated for the periods 1983–1987 and 1993–1997 employing the MONERIS model. This model distinguishes between six diffuse pathways and point source emissions from waste water treatment plants and direct industrial discharges. It was estimated that the total nitrogen input into the German river systems amounts to about 819,000 t N year^–1 in the period 1993 to 1997. These emissions have decreased since the mid-eighties by about 266,000 t N year^–1, mainly caused by the reduction of point discharges. For phosphorus the emissions have been reduced by 56,290 t P year^–1 and amount to 37,250 t P year^–1 in the period 1993–1997. Based on emission data a retention module estimates riverine nutrient loads. The comparison of the model output with the observed loads shows a deviation as low as 30% and 50% for nitrogen and phosphorus, respectively. The regional resolution of the model indicates the relative importance of different pathways for phosphorus and nitrogen input into river systems. Electronic Publication     

Data requirements of GREAT-ER: Modelling and validation using LAS in four UK catchments

Higher-tier environmental risk assessments on “down-the-drain” chemicals in river networks can be conducted using models such as GREAT-ER (Geography-referenced Regional Exposure Assessment Tool for European Rivers). It is important these models are evaluated and their sensitivities to input variables understood. This study had two primary objectives: evaluate GREAT-ER model performance, comparing simulated modelled predictions for LAS (linear alkylbenzene sulphonate) with measured concentrations, for four rivers in the UK, and investigate model sensitivity to input variables. We demonstrate that the GREAT-ER model is very sensitive to variability in river discharges. However it is insensitive to the form of distributions used to describe chemical usage and removal rate in sewage treatment plants (STPs). It is concluded that more effort should be directed towards improving empirical estimates of effluent load and reducing uncertainty associated with usage and removal rates in STPs. Simulations could be improved by incorporating the effect of river depth on dissipation rates.     

Factors impacting on pharmaceutical leaching following sewage application to land

Sewage effluent application to land is a treatment technology that requires appropriate consideration of various design factors. Soil type, level of sewage pre-treatment and irrigation rate were assessed for their influence on the success of soil treatment in removing pharmaceuticals remaining after conventional sewage treatment. A large scale experimental site was built to assess treatment performance in a realistic environment. Of the factors investigated, soil type had the biggest impact on treatment performance. In particular, carbamazepine was very efficiently removed (>99%) when irrigated onto a volcanic sandy loam soil. This was in contrast to irrigation onto a sandy soil where no carbamazepine removal occurred after irrigation. Differences were likely caused by the presence of allophane in the volcanic soil which is able to accumulate a high level of organic matter. Carbamazepine apparent adsorption distribution coefficients (K(d)) for both soils when irrigated with treated sewage effluent were determined as 25 L kg(-1) for the volcanic soil and 0.08 L kg(-1) for the sandy soil. Overall, a volcanic soil was reasonably efficient in removing carbamazepine while soil type was not a major factor for caffeine removal. Removal of caffeine, however, was more efficient when a partially treated rather than fully treated effluent was applied. Based on the investigated pharmaceuticals and given an appropriate design, effluent irrigation onto land, in conjunction with conventional sewage treatment may be considered a beneficial treatment for pharmaceutical removal.     

Stakeholder analysis for industrial waste management systems

Stakeholder approaches have been applied to the management of companies with a view to the improvement of all areas of performance, including economic, health and safety, waste reduction, future policies, etc. However no agreement exists regarding stakeholders, their interests and levels of importance. This paper considers stakeholder analysis with particular reference to environmental and waste management systems. It proposes a template and matrix model for identification of stakeholder roles and influences by rating the stakeholders. A case study demonstrates the use of these and their ability to be transferred to other circumstances and organizations is illustrated by using a large educational institution.     

Dilution-based emissions sampling from stationary sources: Part 1--Compact sampler methodology and performance

This paper presents the design and performance of a compact dilution sampler (CDS) for characterizing fine particle emissions from stationary sources. The sampler is described, along with the methodology adopted for its use. Dilution sampling has a number of advantages, including source emissions that are measured under conditions simulating stack gas entry and mixing in the ambient atmosphere. This is particularly important for characterizing the semivolatile species in effluents as a part of particulate emissions. The CDS characteristics and performance are given, along with sampling methodology. The CDS was compared with a reference dilution sampler. The results indicate that the two designs are comparable for tests on gas-fired units and a diesel electrical generator. The performance data indicate that lower detection limits can be achieved relative to current regulatory methods for particulate emissions. Test data for the fine particulate matter (PM2.5) emissions are provided for comparison with U.S. Environment Protection Agency (EPA) Conditional Test Method 040 for filterable particulate matter (FPM) and the EPA Method 202 for condensable particulate matter. This comparison showed important differences between methods, depending on whether a comparison is done between in situ FPM determinations or the sum of such values with condensable PM from liquid filled impingers chilled in an ice bath. These differences are interpretable in the light of semivolatile material present in the stack effluent and, in some cases, differences in detection and quantification limits. Determination of emissions from combustors using liquid fuels can be readily achieved using 1-hr sampling with the CDS. Emissions from gasfired combustors are very low, requiring careful attention to sample volumes. Sampling volumes corresponding with 6-hr operation were used for the combined mass and broad chemical speciation. Particular attention to dilution sampler operation with clean dilution air also is essential for gas-fired sources.