COST COMPARISON BETWEEN CESSPOOL AND SANITARY SEWERAGE SYSTEMS IN SAUDI URBAN AREAS1

ABSTRACT: Extensive use is made of on-site wastewater disposal systems of cesspools due to the absence of a sanitary sewerage system in Saudi urban areas. This system has caused the groundwater table to rise to a public nuisance level. A health risk has also evolved. There are several infrastructural, environmental, and social impacts from this, resulting in great financial losses. Examples are: surface water flooding, damage to foundations of buildings and asphalt street pavements, flooded basements and added construction costs required for excavation, dewatering, insulation materials, and special cements. Most of these costs are indirectly being paid by the private and public sectors. This study compares the estimated costs of damage and losses with the estimated costs of building, operating, and maintaining sanitary sewerage systems in the cesspool-served areas. The annual cost of the cesspool system, depending on the severity of the adverse impacts, ranges from 2.2 to 4.4 times the annual cost of the sanitary sewerage system. Remedies for these impacts are very expensive, and delays in the implementation of the sanitary sewerage facility will make the damage recovery more expensive, and in some cases, impossible. Thus, it is recommended that highest priority to be given to the sanitary sewerage systems in Saudi urban areas.     

USE OF WATER FROM THE ANCIENT MAKKAH GALLERIES FOR IRRIGATION1

ABSTRACT: Due to the spread of Islam in the seventh century the number of pilgrims to the City of Makkah increased sharply, resulting in an acute water shortage. To solve this problem, galleries were built to collect water from the upstream of Wadi Naaman and transfer it to Makkah. Expansion of Makkah and the absence of any mapping of the galleries have resulted in the destruction of a part of the galleries. This caused a discontinuity of flow in the galleries and, consequently, the ground water table is rising at a rate of 0.48 m/yr, causing environmental problems. Research was conducted to rehabilitate the destructed part of the galleries, and to find an appropriate use for the ground water. The study found that the quality of the ground water is suitable for landscaping purposes, that is, for the irrigation of trees and ornamental plants.     

Municipal solid waste landfill siting using intelligent system

Historically, landfills have been the dominant alternative for the ultimate disposal of municipal solid waste. This paper addresses the problem of siting a new landfill using an intelligent system based on fuzzy inference. The proposed system can accommodate new information on the landfill site selection by updating its knowledge base. Several factors are considered in the siting process including topography and geology, natural resources, socio-cultural aspects, and economy and safety. The system will rank sites on a scale of 0-100%, with 100% being the most appropriate one. A weighting system is used for all of the considered factors. The results from testing the system using different sites show the effectiveness of the system in the selection process.     

Remediation of drinking water contaminated with arsenic by the electro-removal process using different metal electrodes

The purification of water by the electro-removal process using different metal electrodes is widely used in different spheres of science and industry. The comparative characteristics under galvanostatic conditions of zinc (Zn), brass (Cu-Zn), copper (Cu) and iron (Fe) anodes for arsenic (As) removal from water by the electro-removal process in laboratory scale experiments were determined at current densities of 1.5, 3 and 12 mA cm(-2) for 60 min, from a solution containing different concentrations of As(v) (from 70 to 130 microg L(-1)). The results at these different current densities indicated that rapid arsenic removal was achieved at higher current densities (12 mA cm(-2)), with the chemical precipitation of arsenate complexes. The removal of As was relatively efficient, with the following tendency (at 1.5 mA cm(-2)): Fe (>93%) congruent with Zn (>93%) > Cu-Zn (>73%) >Cu (>67%), these efficiencies were relatively independent of the removal rate for all the initial arsenic concentrations investigated. This behaviour is attributed to the electrochemical intrinsic properties of the most active metals, and to the chemical precipitation reactions following the electrochemical process, iron being the most attractive metal for arsenic removal for practical applications.     

Heavy metal enrichment in surface sediments from the SW Gulf of Mexico

The south west coastal zone in the Gulf of Mexico is an area with great industrial and agricultural development, which experiences intensive prospecting and extraction of hydrocarbons. After running through industrial, agricultural, and urban areas, waters from both the Jamapa River and La Antigua River arrive here. The rivers’ discharge areas of influence were estimated considering the textural and chemical composition of the supplied sediments. The main factors that determine sediment distribution were mineralogy, heavy minerals, carbonates, and anthropic contributions. The presence of metals in excess was evaluated using various pollution indicators, such as the enrichment factor, contamination factor, modified contamination factor, and geo-accumulation indexes. Data from different used contamination indexes show metal enrichments in As, Cu, Zn, Co, Cr, and V in La Antigua; As, Cu, and Cr in Jamapa; and As, Zn, and Pb in the Continental slope area. The adverse effects of metals on aquatic organisms were assessed using sediment quality guidelines that show Ni, As, Cu, and Cr may produce adverse effects on coastal areas. There was no evidence of contamination associated to the oil industry.     

Inactivation of pathogenic micro-organisms in hospital waste using a microwave

The aim of this study was to investigate the efficiency of dry sterilization by microwave in the inactivation of pathogenic bacteria in blood wastes. Eight bacteria strains were selected for this purpose and these are S. aureus, Salmonella sp., E. faecalis, K. pneumonia, P. aeruginosa, E. coli, Streptococcus Group B and Bacillus sp. Sterilization by microwave was carried out at 385, 450 and 700 watts for 1, 5 and 10 min, respectively. Isolation and enumeration of pathogenic bacteria before and after treatments were carried out using direct plate technique and inactivation was determined in terms of log reduction. Increasing the running time and power to 10 min and 700 watts did not increase log reduction of most of pathogenic bacteria especially of gram negative bacteria. Revival of pathogenic bacteria during the storage period might be aided by the presence of a low moisture content which helps bacterial cells to revive but not to reproduce or over-grow. It can be concluded that dry sterilization of blood wastes by microwave reduces the number and limited re-growth of these pathogenic bacteria during storage time, due to the lower moisture content in the blood wastes.     

The effect of paraoxon on spermatogenesis in <Emphasis Type="Italic">Dugesia gonocephala</Emphasis> from the Chilean Altiplano: proliferation and apoptosis

Introduction and aims  

The Chilean Altiplano ecosystem is conserved free from contaminants and pollutants because of the absence of major local human activities such as agriculture or other industries. We studied the effects of paraoxon on proliferation and apoptosis of testicular cells during active spermatogenesis in Dugesia gonocephala collected from a pristine river (Guacollo) in the Altiplano region nearby Visviri town, Chile.     

Kinetic of formation for single carbon dioxide and mixed carbon dioxide and tetrahydrofuran hydrates in water and sodium chloride aqueous solution

A laboratory-scale reactor system is built and operated to measure the kinetic of formation for single and mixed carbon dioxide–tetrahydrofuran hydrates. The T-cycle method, which is used to collect the kinetic data, is briefly discussed. For single carbon dioxide hydrate, the induction time decreases with the increase of the initial carbon dioxide pressure up to 2.96 MPa. Beyond this pressure, the induction time is becoming relatively constant with the increase of initial carbon dioxide pressure indicating that the liquid phase is completely supersaturated with carbon dioxide. Experimental results show that the inclusion of tetrahydrofuran reduces the induction time required for hydrate formation. These observations indicate hydrate nucleation process and onset growth are more readily to occur in the presence of tetrahydrofuran. In contrast, the presence of sodium chloride prolongs the induction time due to clustering of water molecules with the ions and the salting-out effects. It is also shown that the degree of subcooling required for hydrate formation is affected by the presence of tetrahydrofuran and sodium chloride in the hydrate forming system. The presence of tetrahydrofuran in the hydrate system significantly reduces the amount of carbon dioxide uptake. The apparent rate constant, k, for those systems are reported.