PM10 and PM2.5 source apportionment in the Barcelona Metropolitan area, Catalonia, Spain

Levels of total suspended particles, PM10, PM2.5 and PM1 were continuously monitored at an urban kerbside in the Metropolitan area of Barcelona from June 1999 to June 2000. The results show that hourly levels of PM2.5 and PM1 are consistent with the daily cycle of gaseous pollutants emitted by traffic, whereas TSP and PM10 do not follow the same trend, at least in the diurnal period. The PM2.5/PM10 ratio is dependent on the traffic emissions, whereas additional contribution sources for the >10 μm fraction must be taken into account in the diurnal period. Different PM10 and PM2.5 source apportionment techniques were compared. A methodology based on the chemical determination of 83% of both PM10 and PM2.5 masses allowed us to quantify the marine (4% in PM10 and <1% in PM2.5), crustal (26% in PM10 and 8% in PM2.5) and anthropogenic (54% in PM10 and 73% in PM2.5) loads. Peaks of crustal contribution to PM10 (up to 44% of the PM10 mass) were recorded under Saharan air mass intrusions. A different seasonal trend was observed for levels of sulphate and nitrate, probably as a consequence of the different thermodynamic behaviour of these PM species and the higher summer oxidation rate of SO₂.     

Elaphoidella grandidieri (Harpacticoida: Copepoda): demographic characteristics and possible use as live prey in aquaculture

In freshwater ecosystems, rotifers and cladocerans are ideal prey for fish larvae whereas copepods, due to their purported low growth rate and predatory tendency, are not. We recently isolated the parthenogenetic Elaphoidella grandidieri (Gueme et Richard, 1893) a benthic freshwater harpacticoid, from a fish farm in the State of Morelos, central Mexico and tested its potential as a live prey organism for larval vertebrates. Population growth and life table demography experiments were conducted, in 100 ml recipients with 50 ml of test medium on a diet of Scenedesmus acutus at a density of 1.0 X 10(6) cell ml(-1); the former on live algae alone while the latter on live algae as well as detritus. We also conducted experiments to document the prey preference for this copepod by the larval Ameca splendens (Pisces: Goodeidae) and Ambystoma mexicanum (Amphibia: Ambystomatidae), fed the rotifer Plationus patulus, the ostracod Heterocypris incongruens, and the cladocerans Moina macrocopa and Daphnia pulex. Elaphoidella grandidieri is relatively easy to maintain under laboratory conditions, reaching densities (copepodites and adults) of more than 10,000 l(-1). The generation time ranged between 30-45 days, depending on the diet. The net reproductive rate was as high as 60 nauplii female(-1) day (1). Population growth rates ranged between 0.03 and 0.11 d(-1), live algae being the superior diet compared to detritus. Both predators showed no preference for E. grandidieri, but in the absence of alternate prey they consumed 80% of the harpacticoids offered. The data have been discussed in relation to the potential of E. grandidierias live food for aquaculture.     

Study of boron behaviour in two Spanish coal combustion power plants

A full-scale field study was carried out at two Spanish coal-fired power plants equipped with electrostatic precipitator (ESP) and wet flue gas desulfurisation (FGD) systems to investigate the distribution of boron in coals, solid by-products, wastewater streams and flue gases. The results were obtained from the simultaneous sampling of solid, liquid and gaseous streams and their subsequent analysis in two different laboratories for purposes of comparison. Although the final aim of this study was to evaluate the partitioning of boron in a (co-)combustion power plant, special attention was paid to the analytical procedure for boron determination. A sample preparation procedure was optimised for coal and combustion by-products to overcome some specific shortcomings of the currently used acid digestion methods. In addition boron mass balances and removal efficiencies in ESP and FGD devices were calculated. Mass balance closures between 83 and 149% were obtained. During coal combustion, 95% of the incoming boron was collected in the fly ashes. The use of petroleum coke as co-combustible produced a decrease in the removal efficiency of the ESP (87%). Nevertheless, more than 90% of the remaining gaseous boron was eliminated via the FGD in the wastewater discharged from the scrubber, thereby causing environmental problems.     

Debates on Sustainable Development: Towards a Holistic View of Reality

The paper analyzes the concept of sustainable development in the light of the different interpretations existing on the issue since its appearance and establishment as an ideal to lead humanity’s line of progress. Within these interpretations, a characteristic generation of diverse debates can be appreciated, arising from different perspectives, academic as well as ideological, aiming at describing, clarifying and determining their conceptual reach. Based on these facts a model of categorization for these debates has developed, a model in which interpretations generated on the concept of sustainable development were catalogued into four realms: conceptual, contextual, academic and geopolitical. The configuration of these four areas of debate, as well as the recognition of the diversity of interpretations existing on sustainable development, is a reflection of the intrinsic complexity of the phenomena, which affect the natural and social world, both at the local and global level. The analysis of this complexity is based on the subjectivity, which is inherent to the interpretation of these phenomena, with permanent reference to the cultural context from which the diverse discourses were structured. This global perspective on the state-of-the-art controversy concerning the idea of sustainable development as an articulatory axis reveals the necessity of building epistemological models, which can give a new direction to scientific research. From these new models, based on the analysis of the holistic character of reality, the subjective and the objective must be integrated in the generation of knowledge, which contributes usefully to the unceasing reconstruction of our world-(view). Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

Evolution of lead concentration in the particulate matter of Santiago,Chile, since 1978

Santiago is a city of over 4.5 million inhabitants and about 415000 motor vehicles using leaded gasoline. Twenty-four-hour samples were taken of total and fractionated particulate matter using a low-volume system and two Andersen cascade impactors, between 1978 and 1989 at different sites of the city of Santiago. Lead concentrations were determined by atomic absorption spectrophotometry. The results show that Pb concentrations vary greatly depending on the site selected. Higher values are always detected near the city center. An annual variation with the highest value during the autumn-winter period (May–July) is clearly observed. Lead concentrations versus size are clearly biased to particles smaller than 2 µm. A correlation is observed between Pb concentrations and the suspended particulate matter under 3 µm at different sites of the city. The curves of Pb concentration versus size of the aerosols emitted by the gas exhaust of motor vehicles using leaded gasoline are similar to those of the atmospheric aerosols.     

Microfibrous mesh coated with titanium dioxide: a self-sterilizing,self-cleaning filter

The utility of metal microfibrous mesh coated with titanium dioxide as a self-sterilizing, self-cleaning filter for air is explored. The low-cost mesh is produced via a roll-to-roll process similar to paper manufacturing. The titanium dioxide is applied by spraying an aqueous suspension of the photocatalyst on the surface of the mesh using an airbrush. Photocatalytic activity comparable to a powder layer is achieved at one quarter of the mass loading. The coating enhanced the separation of Escherichia coli (E. coli) from aqueous suspension, but also led to an increase in pressure drop in an air stream flowing through the mesh. The self-cleaning property of the coated mesh is established by recovery of pressure drop performance lost due to biofilm buildup. This is accomplished via a photocatalytic regeneration process involving exposing the mesh to ultraviolet light in air. Oxidation is confirmed by monitoring CO2 evolution during the regeneration. Scanning electron photomicrographs also provide visual evidence of successful regeneration via photocatalysis.     

Exploring the Relationship Between Hydrologic Parameters and Nutrient Loads Using Digital Elevation Model and GIS – A Case Study from Sugarcreek Headwaters, Ohio, U.S.A.

Ohio is typical among the Midwestern and Eastern United States with high levels of water pollutants, the main sources being from agriculture. In this study, we used a digital elevation model in conjunction with hydrological indices to determine the role of landscape complexity affecting the spatial and temporal variation in pollutant levels, in one of the most impaired headwater streams in Ohio. More than eighty five percent of the study area is dominated by agriculture. Spatial distribution of slope (S), altitude and wetness index along with other watershed parameters such as flow direction, flow accumulation, stream networks, flow stream orders and erosion index were used within a Geographic Information Systems framework to quantify variation in nitrate and phosphate loads to headwater streams. Stream monitoring data for nutrient loads were used to correlate the observed spatial and temporal patterns with hydrological parameters using multiple linear regressions. Results from the wetness index calculated from a digital elevation model suggested a range of 0.10–16.39, with more than 35% having values less than 4.0. A Revised Universal Soil Loss Equation (RUSLE) predicted soil loss in the range of 0.01–4.0 t/ha/yr. Nitrate nitrogen levels in the study area paralleled precipitation patterns over time, with higher nitrate levels corresponding to high precipitation. Atmospheric deposition through precipitation could explain approximately 35% of total nitrate levels observed in streams. Among the different topographic variables and hydrological indices, results from the step-wise multiple regression suggested the following best predictors, (1) elevation range and upstream flow length for nitrate, (2) flow direction and upstream flow length for ammonia-nitrogen and slope, and (3) elevation range for phosphate levels. Differences in the landscape models observed for nitrate, phosphate and ammonia-nitrogen in the surface waters were attributed partly to differences in the chemical activity and source strengths of the different forms of these nutrients through agricultural management practices. The results identify geomorphologic and landscape characteristics that influence pollutant levels in the study area.     

Changes in the chemical and physicochemical properties of the solid fraction of cattle slurry during composting using different aeration strategies

Replacement of peat as a growing medium by a renewable material, such as an organic waste, is an issue of concern since harvesting of peat has a considerable environmental impact and, actually, it is a non-renewable resource. Cattle manure is a readily available organic waste, which means that once it goes through the composting process, it can be used as an alternative to peat, specifically, the solid fraction obtained from mechanical liquid-solid separation of cattle slurry (SF). Studies have shown it to be suitable for such uses. The purpose of this study was to detect possible changes in the physicochemical and chemical properties of SF when it is composted using different aeration strategies, with an emphasis on the changes that would make it feasible for use as a substrate. With this aim in mind, an experiment was designed with three aeration strategies that would be used during composting. The first consisted of applying air through a static method (forced ventilation). The second involved improving aeration by adding a bulking agent and a dynamic turning method. In the third strategy, aeration was carried out by turning (control). The results show that the different aeration strategies had a clear effect on the evolution of pH, electrical conductivity (EC), nitrate-N, ammonia-N and bicarbonate content. Nitrification was favored under good aeration conditions using the static composting method, probably due to the greater availability of ammonia-N that was transformed into nitrate-N. In general, the low buffering capacity allowed for a reduction of the pH during the curing stage of composting (in conjunction with low temperatures during this period), a characteristic that favors the use of this compost as a growing medium. We also conclude that measuring bicarbonate levels during composting could be used as an indicator of the possible acidification of the material and as a way of evaluating the level of material aeration.     

Treatment of municipal landfill leachate by catalytic wet air oxidation: Assessment of the role of operating parameters by factorial design

The wet air oxidation (WAO) of municipal landfill leachate catalyzed by cupric ions and promoted by hydrogen peroxide was investigated. The effect of operating conditions such as WAO treatment time (15-30 min), temperature (160-200 °C), Cu²⁺ concentration (250-750 mg L⁻¹) and H₂O₂ concentration (0-1500 mg L⁻¹) on chemical oxygen demand (COD) removal was investigated by factorial design considering a two-stage, sequential process comprising the heating-up of the reactor and the actual WAO. The leachate, at an initial COD of 4920 mg L⁻¹, was acidified to pH 3 leading to 31% COD decrease presumably due to the coagulation/precipitation of colloidal and other organic matter. During the 45 min long heating-up period of the WAO reactor under an inert atmosphere, COD removal values up to 35% (based on the initial COD value) were recorded as a result of the catalytic decomposition of H₂O₂ to reactive hydroxyl radicals. WAO at 2.5 MPa oxygen partial pressure advanced treatment further; for example, 22 min of oxidation at 200 °C, 250 mg L⁻¹ Cu²⁺ and 0-1500 mg L⁻¹ H₂O₂ resulted in an overall (i.e. including acidification and heating-up) COD reduction of 78%. Amongst the operating variables in question, temperature had the strongest influence on both the heating-up and WAO stages, while H₂O₂ concentration strongly affected the former and reaction time the latter. Nonetheless, the effects of temperature and H₂O₂ concentration were found to depend on the concentration levels of catalyst as suggested by the significance of their 3rd order interaction term.