Innovative micro hole machining with minimum burr formation by the use of newly developed micro compound tool

The study focuses on the efforts for minimization of burr formation and improvement of hole surface roughness in micro through-hole machining. It deals with the development of micro compound tool which is consisting of a micro flat drill as the drilling part and a micro diamond-electroplated-grinding part for hole finishing. The finishing diameters of each drilling and grinding parts of the fabricated micro compound tool are 90 μm and 100 μm, respectively. The study focuses mainly on the effect of drill point angle and ultrasonic vibration applied during micro hole machining to the hole entrance and exit burrs formation. The used workpiece is made of stainless steel (SUS304) with a thickness of 100 μm. From the experiment, it was found that the tool having drill point angle of 118° resulted in a smaller burr formation although hole machining was conducted for 600 holes. Furthermore, the application of ultrasonic vibration during hole machining could improve the performance of the developed micro compound tool and decreased the burr size, especially the exit burr.     

Determination of persistent organic pollutants by gas chromatography/laser multiphoton ionization/time-of-flight mass spectrometry

An authentic mixture of polychlorinated biphenyls was measured using a short wide-bore capillary column for the group separation of major components present in an actual sample of Kanechlor. The limits of detection were improved by ca. 2 fold in comparison with those obtained using a conventional capillary column, since the retention time was reduced and the amount of analytes introduced into the mass spectrometer per unit time could be increased. On the other hand, surface-water and sediment samples containing polycyclic aromatic hydrocarbons (PAHs) were collected from the river located in the vicinity of a waste water treatment plant. Even acenaphthylene, a minor component of the mixture could be measured for the sediment sample, and the concentrations were determined for several heavy PAHs. As demonstrated, a technique involving laser multiphoton ionization/time-of-flight mass spectrometry was useful as a sensitive and selective analytical tool for the trace analysis of persistent organic pollutants in an environmental sample.     

Geographic variation in a predator-induced defense and its genetic basis

Predator-induced morphological defenses are a well-known form of phenotypic plasticity, but we continue to have a limited understanding of geographic variation in these responses and its genetic basis. Here we examine genetic variation and geographic differentiation in the inducible defenses of tadpoles (Rana pirica) in response to predatory salamander larvae (Hynobius retardatus). To do so, we crossed male and female frogs from a "mainland" Japanese island having predaceous salamanders and a more isolated island not having predaceous salamanders and raised resulting offspring in the presence and absence of H. retardatus. Mainland tadpoles exhibited a higher capacity to express the inducible morphology (a more bulgy body) than those from the predator-free island, and expression of the bulgy morph in mainland-island hybrids produced phenotypes that were intermediate to those produced by pure crosses. In addition, parental sex had no effect on expression of the bulgy morph. Our results support the hypothesis that geographic variation in inducible defenses is linked to the additive effects of autosomal alleles that are shaped by differences in historical exposure to the inducing predator.     

Fluctuations of the red tide flagellates Chattonella spp. (Raphidophyceae) and the algicidal bacterium Cytophaga sp. in the Seto Inland Sea, Japan

A marine algicidal gliding bacterium Cytophaga sp. strain J18/M01 was isolated in 1990 from a station in northern Harima-Nada, the Seto Inland Sea, Japan, using the harmful red tide alga Chattonella antiqua (Hada) Ono as a susceptible organism. The bacterium can prey upon various species of microalgae. Temporal fluctuations of this bacterium and Chattonella spp. [C. antiqua and C. marina (Subrahmanyan) Hara et Chihara] were investigated weekly at the above station in the summer of 1997 and 1998, using immunofluorescence assay employing highly specific polyclonal antibodies for the bacterium. In the summer of 1997, the cell density of Chattonella spp. showed a maximum value (70 cells ml⁻¹) on 8 July, and decreased thereafter. The bacterium Cytophaga sp. J18/M01 was commonly detected around a few hundreds of cells per milliliter or less. The number of Cytophaga sp. J18/M01 increased after the peak of Chattonella spp., and the maximum cell number of the bacterium was 1350 ml⁻¹. This algicidal bacterium also followed the changes of total amounts of microalgal biomass (chlorophyll a+pheophytin) when Chattonella spp. were absent. In the summer of 1998, Chattonella spp. were relatively less abundant (maximum 21 cells ml⁻¹), and the algicidal bacterium Cytophaga sp. J18/M01 showed a close relationship with the change of total microalgal biomass. The present study suggests that the algicidal bacterium Cytophaga sp. J18/M01 preyed upon, not only harmful red tide microalgae, but also other common microalgae such as diatoms, and the bacterium presumably plays an important role in regulating microalgal biomass in natural marine environments. Received: 20 April 2000 / Accepted: 1 December 2000     

Response surface method for modeling the removal of carbon dioxide from a simulated gas using water absorption enhanced with a liquid-film-forming device

This paper presents the results from using a physical absorption process to absorb gaseous CO_2mixed with N_2using water by producing tiny bubbles via a liquid-film-forming device(LFFD)that improves the solubility of CO_2in water.The influence of various parameters—pressure,initial CO_2concentration,gas-to-liquid ratios,and temperature—on the CO_2removal efficiency and its absorption rate in water were investigated and estimated thoroughly by statistical polynomial models obtained by the utilization of the response surface method(RSM)with a central composite design(CCD).Based on the analysis,a high efficiency of CO_2capture can be reached in conditions such as low pressure,high CO_2concentration at the inlet,low gas/liquid ratio,and low temperature.For instance,the highest removal efficiency in the RSM–CCD experimental matrix of nearly 80%occurred for run number 20,which was conducted at 0.30 MPa,CO_2concentration of 35%,gas/liquid ratio of 0.71,and temperature of 15°C.Furthermore,the coefficients of determination,R~2,were 0.996 for the removal rate and 0.982 for the absorption rate,implying that the predicted values computed by the constructed models correlate strongly and fit well with the experimental values.The results obtained provide essential information for implementing this method properly and effectively and contribute a promising approach to the problem of CO_2capture in air pollution treatment.     

Delignification of disposable wooden chopsticks waste for fermentative hydrogen production by an enriched culture from a hot spring

Hydrogen(H2) production from lignocellulosic materials may be enhanced by removing lignin and increasing the porosity of the material prior to enzymatic hydrolysis. Alkaline pretreatment conditions,used to delignify disposable wooden chopsticks(DWC) waste, were investigated. The effects of NaOH concentration, temperature and retention time were examined and it was found that retention time had no effect on lignin removal or carbohydrate released in enzymatic hydrolysate. The highest percentage of lignin removal(41%) was obtained with 2% NaOH at 100℃, correlated with the highest carbohydrate released(67 mg/gpretreated DWC) in the hydrolysate. An enriched culture from a hot spring was used as inoculum for fermentative H2 production, and its optimum initial pH and temperature were determined to be 7.0 and 50℃, respectively. Furthermore, enzymatic hydrolysate from pretreated DWC was successfully demonstrated as a substrate for fermentative H2 production by the enriched culture. The maximum H2 yield and production rate were achieved at 195 mL H2/g total sugarsconsumedand 116 mL H2/(L·day), respectively.     

Inactivation effect of pressurized carbon dioxide on bacteriophage Qβ and ΦX174 as a novel disinfectant for water treatment

The inactivation effects of pressurized CO2 against bacteriophage Qβ and ΦX174 were investigated under the pressure of 0.3–0.9 MPa, initial concentration of 107–109PFU/mL, and temperature of17.8°C–27.2°C. The optimum conditions were found to be 0.7 MPa and an exposure time of 25 min. Under identical treatment conditions, a greater than 3.3-log reduction in bacteriophage Qβ was achieved by CO2, while a nearly 3.0 log reduction was observed for phage ΦX174. The viricidal effects of N2O(an inactivation gas with similar characteristics to CO2), normal acid(HCl), and CO2 treatment with phosphate buffered saline affirmed the chemical nature of CO2 treatment. The pumping cycle, depressurization rate, and release of intracellular substances caused by CO2 were its viricidal mechanisms. The results indicate that CO2 has the potential for use as a disinfectant without forming disinfection by-products.