我国养猪业废弃物中四环素类、磺胺类抗生素及相关抗性基因污染研究进展

我国是世界养猪第一大国,生猪饲养量和猪肉产量均位居世界第一。养猪业每年所产生的粪便、废水中含有大量畜用抗生素及其代谢产物,使养猪业废弃物成为环境中重要的抗生素污染源之一,随之产生的抗性基因污染及传播问题也不容忽视。本文结合近年来国内外的研究数据,对我国养猪业废弃物中四环素类、磺胺类抗生素及其相关抗性基因的检测方法、污染状况及影响抗性基因传播的因素进行了分析,并基于控制我国养猪行业抗生素及抗性基因污染的目的,提出了今后的研究重点。     

非毒性剂量重金属锑通过改变细胞脂代谢促进前列腺癌进展

本文旨在检测健康人群与前列腺癌患者血清中重金属锑的含量,并对重金属锑在前列腺癌发生发展中的作用和相关机制进行初步探索。本实验使用电感耦合等离子体质谱仪(ICP-MS)对健康人群和前列腺癌患者血清中重金属锑的含量进行了检测;此外,分别通过MTT和Alamar-Blue方法对于重金属锑对人前列腺癌PC-3细胞的毒性效应进行了评价,并进一步探讨了非毒性剂量的重金属锑对前列腺癌细胞增殖能力(细胞计数及克隆形成实验)及脂类代谢过程(细胞内甘油三酯)的影响。研究结果显示:重金属锑在前列腺癌组患者血清中含量明显高于健康人群组且差异具有统计学意义;毒性实验结果表明高剂量的重金属锑能够显著抑制细胞活力且呈浓度依赖型方式,而非毒性剂量重金属锑能够显著促进前列腺癌细胞增殖,并导致细胞内甘油三酯的含量增加(P0.05)。综上所述,重金属锑在前列腺癌患者血清中具有相对较高水平,其机制可能是通过影响细胞脂类代谢从而促进前列腺癌的进展,这将对未来前列腺癌的预防和治疗提供一定的理论依据。     

含油率对餐厨垃圾干式厌氧发酵的影响

餐厨垃圾含油率高,且随着地域的变化有显著差别,含油率的高低对餐厨垃圾厌氧消化产气有一定影响.在中温(35℃)和高温(55℃)条件下,研究了不同含油率(0、2%、4%、6%、8%、10%)对餐厨垃圾干式厌氧发酵过程中日产气量、累计产气量、总固体(TS)、挥发性固体(VS)及甲烷产量的影响.结果表明:在中温和高温条件下,当含油率为6%时,200 g餐厨垃圾的累计产气量达最大值,分别为1391.6 m L和2165.9 m L.此时,TS和VS的去除率也最高,中温时去除率分别为29.4%(TS)和33.9%(VS),高温时去除率分别为33.2%(TS)和38.0%(VS).在餐厨垃圾干式厌氧发酵过程中,甲烷的产量占可燃气的体积分数逐渐升高.在中温厌氧发酵条件下,含油率为10%的餐厨垃圾发酵进行到26 d时,甲烷的体积分数最高,为80.5%.在高温干式厌氧发酵条件下,含油率为10%的餐厨垃圾发酵进行到23 d时,甲烷的体积分数最高,为84.2%.     

Mg improves biomass production from soybean wastewater using purple non-sulfur bacteria

Soybean wastewater was used to generate biomass resource by use of purple non-sulfur bacteria (PNSB). This study investigated the enhancement of PNSB cell accumulation in wastewater by Mg^2 + under the light-anaerobic condition. Results showed that with the optimal Mg^2 + dosage of 10 mg/L, biomass production was improved by 70% to 3630 mg/L, and biomass yield also was improved by 60%. Chemical Oxygen Demand (COD) removal reached above 86% and hydraulic retention time was shortened from 96 to 72 hr. The mechanism analysis indicated that Mg^2 + could promote the content of bacteriochlorophyll in photosynthesis because Mg^2 + is the bacteriochlorophyll active center, and thus improved adenosine triphosphate (ATP) production. An increase of ATP production enhanced the conversion of organic matter in wastewater into PNSB cell materials (biomass yield) and COD removal, leading to more biomass production. With 10 mg/L Mg^2 +, bacteriochlorophyll content and ATP production were improved by 60% and 33% respectively.     

Influence of zeta potential on the flocculation of cyanobacteria cells using chitosan modified soil

Using chitosan modified soil to flocculate and sediment algal cells has been considered as a promising strategy to combat cyanobacteria blooms in natural waters. However, the flocculation efficiency often varies with algal cells with different zeta potential (ZP) attributed to different growth phases or water conditions. This article investigated the relationship between ZP of Microcystis aeruginosa and its influence to the flocculation efficiency using chitosan modified soil. Results suggested that the optimal removal efficiency was obtained when the ZP was between − 20.7 and − 6.7 mV with a removal efficiency of more than 80% in 30 min and large floc size of > 350 μm. When the algal cells were more negatively charged than − 20.7 mV, the effect of chitosan modified soil was depressed (< 60%) due to the insufficient charge density of chitosan to neutralize and destabilize the algal suspension. When the algal cells were less negative than − 6.7 mV or even positively charged, a small floc size (< 120 μm) was formed, which may be difficult to sink under natural water conditions. Therefore, manipulation of ZP provided a viable tool to improve the flocculation efficiency of chitosan modified soil and an important guidance for practical engineering of cyanobacteria bloom control.     

Mechanism and kinetics of aluminum dissolution during copper sorption by acidity paddy soil in South China

Soil aggregates were prepared from a bulk soil collected from paddy soil in the Taihu Lake region and aluminum (Al) dissolution, solution pH changes during copper (Cu^2 +) sorption were investigated with static sorption and magnetic stirring. Kinetics of Cu^2 + sorption and Al dissolution were also studied by magnetic stirring method. No Al dissolution was observed until Cu^2 + sorption was greater than a certain value, which was 632, 450, 601 and 674 mg/kg for sand, clay, silt, and coarse silt fractions, respectively. Aluminum dissolution increased with increasing Cu^2 + sorption and decreasing solution pH. An amount of dissolved Al showed a significant positive correlation with non-specific sorption of Cu^2 + (R² > 0.97), and it was still good under different pH values (R² > 0.95). Copper sorption significantly decreased solution pH. The magnitude of solution pH decline increased as Cu^2 + sorption and Al dissolution increased. The sand and clay fraction had a less Al dissolution and pH drop due to the higher ferric oxide, Al oxide and organic matter contents. After sorption reaction for half an hour, the Cu^2 + sorption progress reached more than 90% while the Al dissolution progress was only 40%, and lagged behind the Cu^2 + sorption. It indicated that aluminum dissolution is associated with non-specific sorption.     

Impacts of produced water origin on bacterial community structures of activated sludge

The purpose of this study was to reveal how activated sludge communities respond to influent quality and indigenous communities by treating two produced waters from different origins in a batch reactor in succession. The community shift and compositions were investigated using Polymerase Chain Reaction–denaturing gradient gel electrophoresis(PCR–DGGE) and further16 S ribosomal DNA(r DNA) clone library analysis. The abundance of targeted genes for polycyclic aromatic hydrocarbon(PAH) degradation, nah Ac/phn Ac and C12O/C23 O, was tracked to define the metabolic ability of the in situ microbial community by Most Probable Number(MPN) PCR. The biosystem performed almost the same for treatment of both produced waters in terms of removals of chemical oxygen demand(COD) and PAHs. Sludge communities were closely associated with the respective influent bacterial communities(similarity 60%), while one sludge clone library was dominated by the Betaproteobacteria(38%) and Bacteriodetes(30%)and the other was dominated by Gammaproteobacteria(52%). This suggested that different influent and water quality have an effect on sludge community compositions. In addition, the existence of catabolic genes in sludge was consistent with the potential for degradation of PAHs in the treatment of both produced waters.     

焦作市工业行业的生态效率

以工业城市焦作市为例,选择工业能源消费和污染物(包括废水、固体废物、SO2、烟尘等)排放作为环境负荷,定量分析工业分行业的生态效率及分行业特定环境负荷对总环境负荷的贡献率.结果表明,能源效率最高的行业是黑色金属矿采选业(FMM),为43.19万元·tce-1,贡献率为0.003%;废水排放相关环境效率最高的是交通运输设...     

基于低浓度瓦斯利用的换热器设计及数值分析*

为提高低浓度瓦斯利用效率,对螺旋式、列管式、翅片式3种换热方式进行参数化研究,探讨不同形状换热方式对预热效果的影响,并通过改变流速和温度研究螺旋管换热效果。结果表明:螺旋管换热效果相对最佳,并在vh=0.9 m/s,vc=2.0 m/s时换热温度相对最高。同时,随换热温度升高,出口温度逐渐升高,随速率增加,出口温度先升高后降低。通过研究换热器形状对换热效果的影响,优化换热方式设计,为低浓度瓦斯高效利用提供理论依据。     

Control strategies for disinfection byproducts by ion exchange resin,nanofiltration and their sequential combination

● Effects of AER adsorption and NF on DBP precursors, DBPs, and TOX were examined. ● A treatment approach of resin adsorption followed by nanofiltration was developed. ● Both DOC and Br⁻ could be effectively removed by the sequential approach. ● DBPs, TOX, and cytotoxicity were significantly reduced by the sequential approach. Disinfection byproducts (DBPs) are emerging pollutants in drinking water with high health risks. Precursor reduction before disinfection is an effective strategy to control the formation of DBPs. In this study, three types of anion exchange resins (AERs) and two types of nanofiltration (NF) membranes were tested for their control effects on DBP precursors, DBPs, and total organic halogen (TOX). The results showed that, for AER adsorption, the removal efficiencies of DBP precursors, DBPs, and TOX increased with the increase of resin dose, and the strong basic macroporous anion exchange resin (M500MB) had the highest removal efficiencies. For NF, the highest removal efficiencies were achieved at an operating pressure of 4 bar, and the membrane (NF90) with a smaller molecular weight cut-off, had a better control efficiency. However, AER adsorption was inefficient in removing dissolved organic carbon (DOC); NF was inefficient in removing Br⁻ resulting in insufficient control of Br-DBPs. Accordingly, a sequential approach of AER (M500MB) adsorption followed by NF (NF90) was developed to enhance the control efficiency of DBPs. Compared with single AER adsorption and single NF, the sequential approach further increased the removal efficiencies of DOC by 19.4%–101.9%, coupled with the high Br⁻ removal efficiency of 92%, and thus improved the reduction of cyclic DBPs and TOX by 3.5%–4.9%, and 2.4%–8.4%, respectively; the sequential approach also reduced the cytotoxicity of the water sample by 66.4%.