The impact of the waterborne transmission of Toxoplasma gondii and analysis efforts for water detection: an overview and update

The ubiquitous protozoa Toxoplasma gondii is now the subject of renewed interest, due to the spread of oocysts via water causing waterborne outbreaks of toxoplasmosis in different parts of the world. This overview discusses the different methods for detection of Toxoplasma in drinking and environmental water. It includes a combination of conventional and molecular tools for effective oocyst recovery and detection in water sources as well as factors hindering the detection of this parasite and shedding light on a promising new molecular assay for the diagnosis of Toxoplasma in environmental samples. Hopefully, this attempt will facilitate future approaches for better recovery, concentration, and detection of Toxoplasma oocysts in environmental waters.     

Biodegradation behavior of agricultural pesticides in anaerobic batch reactors

This study explored the biodegradation potential of two agricultural pesticides (2,4-D and isoproturon) as well as their effect on the performance of the anaerobic digestion process. Three 3.5 L batch reactors were used, having the same initial isoproturon concentration (25 mg/L) and different 2,4-D concentrations (i.e. 0, 100, or 300 mg/L, respectively). All systems were fed with equal amounts of primary sludge and digested sludge and operated at the low mesophilic range (32 +/- 2 degrees C). Following an acclimation period of approximately 30 days, complete 2,4-D removal was achieved, whereas isoproturon biodegradation was practically negligible. The presence of 2,4-D did not have a direct effect on acidogenesis since soluble organic carbon [expressed either as volatile fatty acids (VFAs) or as total organic carbon (TOC)] peaked within the first 10 days of operation in all bioreactors. Utilization of VFAs however appeared to follow two distinct patterns: one pattern was represented by acetate and butyrate (i.e. no acid accumulation) while the other was followed by propionate, isobuturate, valerate and isovalerate (i.e. acid accumulation, duration of which was related to the initial 2,4-D concentration). On the whole, all reactors exhibited a successful digestion performance demonstrated by complete VFAs utilization, considerable gas production (containing 45 to 65% methane by volume), substantial volatile suspended solids (VSS) reduction (42 to 50%), as well as pH and alkalinity recovery.     

LEACHATE LEAKAGE FROM LANDFILLS WITH MODERN LINER SYSTEMS1

ABSTRACT: Recent technological advances have led to a new generation of landfill liner systems that are highly effective at intercepting and removing leachate. Many of the modern liner systems are so effective that they allow very little or no leakage. Indeed, the amount of leakage through those liners is so minimal that, although it can be theoretically predicted, it cannot be measured with the available monitoring well technology. In addition to being highly effective, some modern liner systems are constructed with two liner layers separated by a drainage medium that detects and removes any leakage through the top liner. These significant improvements in liner system technology have led to the questioning of the necessity for the currently required high number of monitoring wells. Reduction of the number of the monitoring wells and/or of the frequency of sampling would result in substantial cost savings. The present study reports the results of a research project conducted at eleven municipal landfills with modern liner technology throughout the State of Florida. Through actual field data and computer modeling, it was found that the liner systems standards applied in the State of Florida are very effective at preventing any groundwater contamination. Thus, the present monitoring well regulations are too conservative.     

Waste paper and clinoptilolite as a bulking material with dewatered anaerobically stabilized primary sewage sludge (DASPSS) for compost production

Environmental problems associated with sewage sludge disposal have prompted strict legislative actions over the past few years. At the same time, the upgrading and expansion of wastewater treatment plants have greatly increased the volume of sludge generated. The major limitation of land application of sewage sludge compost is the potential for high heavy metal content in relation to the metal content of the original sludge. Composting of sewage sludge with natural zeolite (clinoptilolite) can enhance its quality and suitability for agricultural use. However, the dewatered anaerobically stabilized primary sewage sludge (DASPSS) contained a low concentration of humic substances (almost 2%), and the addition of the waste paper was necessary in order to produce a good soil conditioner with high concentrations of humics. The final results showed that the compost produced from DASPSS and 40-50% w/w of waste paper was a good soil fertilizer. Finally, in order to estimate the metal leachability of the final compost product, the generalized acid neutralization Capacity (GANC) procedure was used, and it was found that by increasing the leachate pH, the heavy metal concentration decreased. The application of the sequential chemical extraction indicated that metals were bound to the residual fraction characterized as a stabilize fractions.     

A study on the environmental degradation of pesticides azinphos methyl and parathion methyl

The effect of environmental parameters (temperature and relative humidity) on the degradation rate of azinphos methyl and parathion methyl was studied. Proprietary emulsifiable concentrates were diluted and added to each of 90 glass Petri dishes for each pesticide and were left overnight to dry. Petri dishes were placed in 18 air-tight containers (9 for each pesticide) in which were created environments with relative humidity (RH) of 60, 82, and 96%. The containers were stored at 0, 20, and 40 degrees C. From the experimental results best fit curves, kinetic equations, rate constants, and half-lives were calculated. Half-lives of azinphos methyl for the RH studied were, from 124 to 267 days at 0 degrees C, from 89 to 231 days at 20 degrees C, and from 25 to 71 days at 40 degrees C. Corresponding half-lives for parathion methyl were from 48 to 57 days at 0 degrees C, from 9.2 to 10.5 days at 20 degrees C and from 1.3 to 1.5 days at 40 degrees C. The results were correlated with relevant results from the decomposition of the same or similar pesticides on apples both, on the trees and during refrigerated storage. These correlations are suggesting that biological factors strongly affected the decomposition rate of azinphos methyl. On the contrary the decomposition of parathion methyl was mainly affected by environmental rather than biological factors.     

Sonochemical reduction of the antioxidant activity of olive mill wastewater

The use of ultrasonic irradiation to reduce the antioxidant activity of olive oil mill wastewaters (OMWs) originating from two-phase and three-phase decanters was examined. Sonication of diluted OMW samples was conducted at ultrasonic frequencies of 24 and 80 kHz, an applied power varying between 75 and 150 W, and liquid bulk temperatures varying between 25 and 60 degrees C. At the conditions in question, the reduction in antioxidant activity was found to increase with decreasing temperature and increasing power and frequency. Addition of NaCl in the samples also appeared to enhance reduction. Antioxidant activity of OMW samples was assessed using the recently developed Co(II)/ethylenediaminetetraacetic acid (EDTA)-induced luminol chemiluminescence analytical protocol, while the total phenolic load was measured according to the Folin-Ciocalteu method.     

Pushing,pulling and manoeuvring an industrial cart: a psychophysiological study

One of the most frequent manual occupational tasks involves the pushing and pulling of a cart. Although several studies have associated health risks with pushing and pulling, the effects are not clear since occupational tasks have social, cognitive and physical components. The present work investigates a real case of a pushing and pulling occupational task from a manufacturing company. The study initially characterizes the case in accordance with Standard No. ISO 11228-2:2007 as low risk. An experiment with 14 individuals during three modalities of pushing and pulling was performed in order to further investigate the task with the application of electrophysiology. At the end, a simple questionnaire was given. The results show electrophysiological differences among the three modalities of pushing and pulling, with a major difference between action with no load and fully loaded with a full range of motions on the cart to handle.