Identification and Genotyping of Human Sapoviruses Collected from Sewage Water in Naples and Palermo, Italy, in 2011

Human sapoviruses were identified in 15 (12.4 %) of 121 inlet sewage samples collected from wastewater treatment plants in Naples and Palermo, Italy, in 2011. All strains, except one GI.1, were genotyped as GI.2 by sequencing a capsid gene fragment. This is the first detection of sapovirus in wastewaters in Italy.     

Insights into the Porretta Terme (northern Apennines,Italy) hydrothermal system revealed by geochemical data on presently discharging thermal waters and paleofluids

Environmental Geochemistry and Health - This study focuses on the geochemical features of the presently discharging thermal and cold springs and on paleofluids from the upstream portion of the Reno...     

Vehicle-Induced Lead and Cadmium Contamination of Roadside Soil and Plants in Italy

Lead and cadmium concentrations in spontaneous vegetation and in soil sampled at various distances (0–208 m) from several motorways throughout Italy were measured. Lead and cadmium concentrations appear to be correlated to distance from the motorway and to traffic levels. A comparison with data from a remote and unpolluted site shows that foliar lead concentrations can be up to 40 times higher, and foliar cadmium concentrations up to 3 times higher. Plants behave differently in their accumulation of lead and cadmium; conifers present the highest levels. Also the various receptors and compartments of the roadside ecosystem differ in their accumulation of lead and cadmium; soil and bark have consistently higher concentrations, while the leaves and twigs of trees have consistently lower levels. the data recorded by ad hoc introduced bio-accumulating plants (Lolium multiflorum L.) are consistent with those of the spontaneous vegetation. the concentrations of both lead and cadmium in Lolium vary from June to November, following in part the fluctuation in traffic density.     

Facile characterization of polymer fractions from waste electrical and electronic equipment (WEEE) for mechanical recycling

In view of the environmental problem involved in the management of WEEE, and then in the recycling of post-consumer plastic of WEEE there is a pressing need for rapid measurement technologies for simple identification of the various commercial plastic materials and of the several contaminants, to improve the recycling of such wastes.This research is focused on the characterization and recycling of two types of plastics, namely plastic from personal computer (grey plastic) and plastic from television (black plastic). Various analytical techniques were used to monitor the compositions of WEEE. Initially, the chemical structure of each plastic material was identified by Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC). Polymeric contaminants of these plastics, in particular brominated flame retardants (BFRs) were detected in grey plastics only using different techniques. These techniques are useful for a rapid, correct and economics identification of a large volumes of WEEE plastics.     

Heavy metals removal and hydraulic performance in zero-valent iron/pumice permeable reactive barriers

Long-term behaviour is a major issue related to the use of zero-valent iron (ZVI) in permeable reactive barriers for groundwater remediation; in fact, in several published cases the hydraulic conductivity and removal efficiency were progressively reduced during operation, potentially compromising the functionality of the barrier. To solve this problem, the use of granular mixtures of ZVI and natural pumice has recently been proposed. This paper reports the results of column tests using aqueous nickel and copper solutions of various concentrations. Three configurations of reactive material (ZVI only, granular mixture of ZVI and pumice, and pumice and ZVI in series) are discussed. The results clearly demonstrate that iron-pumice granular mixtures perform well both in terms of contaminant removal and in maintaining the long-term hydraulic conductivity. Comparison with previous reports concerning copper removal by ZVI/sand mixtures reveals higher performance in the case of ZVI/pumice.     

Effluents from MBT plants: Plasma techniques for the treatment of VOCs

Mechanical–biological treatments (MBTs) of urban waste are growing in popularity in many European countries. Recent studies pointed out that their contribution in terms of volatile organic compounds (VOCs) and other air pollutants is not negligible. Compared to classical removal technologies, non-thermal plasmas (NTP) showed better performances and low energy consumption when applied to treat lowly concentrated streams. Therefore, to study the feasibility of the application of NTP to MBTs, a Dielectric Barrier Discharge reactor was applied to treat a mixture of air and methyl ethyl ketone (MEK), to simulate emissions from MBTs. The removal efficiency of MEK was linearly dependent upon time, power and specific input energy. Only 2–4% of MEK was converted to carbon dioxide (CO₂), the remaining carbon being involved in the formation of byproducts (methyl nitrate and 2,3-butanedione, especially). For future development of pilot-scale reactors, acting on residence time, power, convective flow and catalysts will help finding a compromise between energy consumption, desired abatement and selectivity to CO₂.     

Use of ambiguous detections to improve estimates from species distribution models

As large carnivores recover throughout Europe, their distribution needs to be studied to determine their conservation status and assess the potential for human-carnivore conflicts. However, efficient monitoring of many large carnivore species is challenging due to their rarity, elusive behavior, and large home ranges. Their monitoring can include opportunistic sightings from citizens in addition to designed surveys. Two types of detection errors may occur in such monitoring schemes: false negatives and false positives. False-negative detections can be accounted for in species distribution models (SDMs) that deal with imperfect detection. False-positive detections, due to species misidentification, have rarely been accounted for in SDMs. Generally, researchers use ad hoc data-filtering methods to discard ambiguous observations prior to analysis. These practices may discard valuable ecological information on the distribution of a species. We investigated the costs and benefits of including data types that may include false positives rather than discarding them for SDMs of large carnivores. We used a dynamic occupancy model that simultaneously accounts for false negatives and positives to jointly analyze data that included both unambiguous detections and ambiguous detections. We used simulations to compare the performances of our model with a model fitted on unambiguous data only. We tested the 2 models in 4 scenarios in which parameters that control false-positive detections and true detections varied. We applied our model to data from the monitoring of the Eurasian lynx (Lynx lynx) in the European Alps. The addition of ambiguous detections increased the precision of parameter estimates. For the Eurasian lynx, incorporating ambiguous detections produced more precise estimates of the ecological parameters and revealed additional occupied sites in areas where the species is likely expanding. Overall, we found that ambiguous data should be considered when studying the distribution of large carnivores through the use of dynamic occupancy models that account for misidentification.     

Using Fallout Lead-210 Measurements to Estimate Soil Erosion in Three Small Catchments in Southern Italy

Soil erosion and associated off-site environmental impacts have attracted increasing attention in recent decades, and there is a growing need for reliable information on rates of soil loss. The potential for using ¹³⁷Cs fallout to quantify rates and patterns of soil redistribution over medium-term timescales (ca. 45 years) has been successfully demonstrated in a wide range of environments around the world. The similar behaviour of fallout ²¹⁰Pb in soils offers potential for its use as an alternative to ¹³⁷Cs, in areas where ¹³⁷Cs inventories are low or are complicated by additional fallout from the Chernobyl accident. There have, however, to date been few attempts to validate the use of fallout ²¹⁰Pb measurements for assessing erosion rates. This paper reports an attempt to explore the use of fallout ²¹⁰Pb to estimate rates of water-induced soil erosion on uncultivated land. It focuses on three small forest/rangeland catchments located in Calabria, southern Italy, for which measurements of sediment output are available. Comparison of the estimates of net soil loss from the catchments derived from ²¹⁰Pb measurements with the measured sediment output, confirmed the validity of the ²¹⁰Pb approach. The soil redistribution rates estimated using ²¹⁰Pb measurements were also consistent with equivalent estimates obtained for the same study catchments using ¹³⁷Cs measurements.