Visible light driven mineralization of spiramycin over photostructured N-doped TiO2 on up conversion phosphors

A novel visible light-active photocatalyst formulation(NdT/OP) was obtained by supporting N-doped TiO_2(NdT) particles on up-conversion luminescent organic phosphors(OP). The photocatalytic activity of such catalysts was evaluated for the mineralization process of spiramycin in aqueous solution. The effect of NdT loading in the range 15–60 wt.% on bulk and surface characteristics of NdT/OP catalysts was investigated by several chemicophysical characterization techniques. The photocatalytic performance of NdT/OP catalysts in the removal of spyramicin from aqueous solution was assessed through photocatalytic tests under visible light irradiation. Total organic carbon(TOC) of aqueous solution,and CO and CO_2 gas concentrations evolved during the photodegradation were analyzed. A dramatic enhancement of photocatalytic activity of the photostructured visible active NdT/OP catalysts,compared to NdT catalyst,was observed. Only CO_2 was detected in gas-phase during visible light irradiation,proving that the photocatalytic process is effective in the mineralization of spiramycin,reaching very high values of TOC removal. The photocatalyst NdT/OP at 30 wt.% of NdT loading showed the highest photocatalytic activity(58%of TOC removed after 180 min irradiation against only 31% removal after 300 min of irradiation of NdT). We attribute this enhanced activity to the high effectiveness in the utilization of visible light through improved light harvesting and exploiting. OP particles act as "photoactive support",able to be excited by the external visible light irradiation,and reissue luminescence of wavelength suitable to promote NdT photomineralization activity.     

Sperm allocation in relation to male traits, female size, and copulation behaviour in freshwater crayfish species

Sperm competition is a well-recognised agent in the evolution of sperm and ejaculate structure, as well as variation in female quality. Models of the evolution of ejaculate expenditure predict that male body condition, female fecundity and the risk and intensity of sperm competition may be the ultimate factors shaping optimal ejaculate size. We investigated sperm allocation in Austropotamobius italicus, a freshwater crayfish exhibiting a coercive mating system and external fertilisation, in relation to male and female traits and copulation behaviour under laboratory conditions. We found that mating males were sensitive to female size and produced larger ejaculates when mating with larger females, which were more fecund in terms of number of eggs produced. We found no evidence for female egg production being sperm-limited, as the number of eggs was not dependent on male sperm expenditure. Copulation duration and number of ejaculations reliably predicted the amount of sperm transferred, and both these behavioural measures positively covaried with female body size. These results indicate that male freshwater crayfish can modulate their sperm expenditure in accordance with cues that indicate female fecundity. In addition, a novel finding that emerged from this study is the decrease in sperm expenditure with male body size, which may either suggest that large, old male crayfish are better able than small males to economise sperm at a given mating to perform multiple matings during a reproductive season, or that they experience senescence of their reproductive performance.     

Biological benthic tools as indicators of coastal marine ecosystems health

Coastal marine ecosystems are increasingly subjected to environmental stress and degradation due to pollution. Several research programmes have addressed this problem and produced relevant data sets for specific areas, often including consistent sets of environmental and biological variables. The value of existing information gathered from these types of data can be largely increased by combining them into a common data set to determine globally applicable relationships. To perform this exercise, the Intergovernmental Oceanographic Commission (IOC) of UNESCO has recently formed the Ad hoc Study Group on Benthic Indicators (http://www.ioc.unesco.org/benthicindicators) with the aim of developing robust indicators of benthic health. In this paper, initial products and ongoing activities of this international initiative are described and discussed. An expansion of initial IOC/UNESCO research on benthic fauna-organic carbon relationships is also presented. As part of this follow-up research, the relationship between total organic carbon concentrations of sediment and abundance, biomass and species diversity of benthic macrofauna was evaluated using data sets from 2 different regions of the world comprising 3 different coastal marine environments. The ability of identifying threshold levels in selected variables that could serve as indicators of related adverse environmental conditions leading to stress in the benthos is envisaged within the frame of a larger joint analysis, carried out by the IOC/UNESCO Study Group on Benthic Indicators, of merged data sets from several coastal regions worldwide.     

One-Year Study of the Elemental Composition and Source Apportionment of PM10 Aerosols in Florence,Italy

Abstract

An extensive investigation was carried out for the characterisation of the air particulate composition in Florence. The aim was to determine the aerosol elemental concentrations, as well as to identify pollution sources. For our investigation, the external Particle-Induced X-Ray Emission–Particle-Induced γ-Ray Emission beam facility of the Istituto Nazionale di Fisica Nucleare, Van de Graaff accelerator at the Physics Department of the Florence University was used. We report the results of the analysis of a long temporal series (approximately 1 yr) of PM₁₀ particulate samples, collected on Millipore filters on a daily basis in three different sites (characterised by different urban settings). Daily concentrations of more than 20 elements were detected. The long sampling period (approximately 1 yr) allowed a comparison with the air quality recommended values and the identification of seasonal variations. Four main sources (traffic, oil-combustion, soil-dust, and wind transported sea-salt) were extracted with the help of Principal Component Analysis (PCA). An absolute PCA showed traffic to be the major source both in the high traffic site and in the urban background site.     

CO2 capture from combined cycles integrated with Molten Carbonate Fuel Cells

In this paper Molten Carbonate Fuel Cells (MCFCs) are considered for their potential application in carbon dioxide separation when integrated into natural gas fired combined cycles. The MCFC performs on the anode side an electrochemical oxidation of natural gas by means of CO₃^2? ions which, as far as carbon capture is concerned, results in a twofold advantage: the cell removes CO₂ fed at the cathode to promote carbonate ion transport across the electrolyte and any dilution of the oxidized products is avoided.The MCFC can be “retrofitted” into a combined cycle, giving the opportunity to remove most of the CO₂ contained in the gas turbine exhaust gases before they enter the heat recovery steam generator (HRSG), and allowing to exploit the heat recovery steam cycle in an efficient “hybrid” fuel cell + steam turbine configuration. The carbon dioxide can be easily recovered from the cell anode exhaust after combustion with pure oxygen (supplied by an air separation unit) of the residual fuel, cooling of the combustion products in the HRSG and water separation. The resulting power cycle has the potential to keep the overall cycle electrical efficiency approximately unchanged with respect to the original combined cycle, while separating 80% of the CO₂ otherwise vented and limiting the size of the fuel cell, which contributes to about 17% of the total power output so that most of the power capacity relies on conventional low cost turbo-machinery. The calculated specific energy for CO₂ avoided is about 4 times lower than average values for conventional post-combustion capture technology. A sensitivity analysis shows that positive results hold also changing significantly a number of MCFC and plant design parameters.     

Book reviews

“Water Planning and the Regions”

Edited by P. J. Purdy, R. S. A.

Discussion Paper No. 9, 1977, £1.50.

Tenant participation in council housing management; Housing Development.

Directorate Occasional Paper 2/77, DoE London, 1977.

Getting tenants involved: a handbook on systems of tenant participation in housing management; DoE London, 1977.

La politica dei servizi tra razionalizzazione e rinnovamento

Alberto L'Abate (1978)

Marsilio Editori, Padova, pp. 316

Handbook for Environmental Planning: the social consequences of environmental change.

J. McEnvoy & T. Dietz (1977)

New York, J. Wiley, pp. 323. Price £15.50

Planning and Urbanism in China

Progress in Planning Vol. 8, Part 2, Fo. 1 N. Jeffrey and M. Caldwell, pp. 97–182, 1977

Pergamen, £4.00

The European Community's Regional Fund

Ross B. Talbot

Progress in Planning, Vol. 8, Part 3, pp. 183–281

Pergamon Press, 1977

Providing the Posh Words

W. Hampton, DoE

1978. £1.50. 60pp.

Four Titles on Conservation

A Critical Bibliography of Building Conservation. John F. Smith. Mansell, London 1978. 207 pages including index. Hard back, £12.90.

Conservation and Planning. Alan Doby. Hutchinson — The Built Environment. 1978. 173 pages. Some illustrations. Paper back, £3.25.

A Study in Conservation. Winston Barnett and Cyril Winskell. Oriel Press, 1977. 45 pages, in English, French and German. Illustrated. Paper back, £3.75.

Interpreting the Conserved Environment. Working Paper No. 29. Brian Goodey. Oxford Polytechnic Department of Town and Country Planning, 1977. 65 pages. Paper back, not priced.

“Belgium”, R. Riley, £3.25, 205 pp.

“The Netherlands”, D. Pinder, £3.25, 194 pp.

“The USSR”, J. C. Dewdney, £3.25, 262 pp.

Development Strategy of Bangladesh

Nurul Islam

Oxford, Pergamon Press, 1978, 109 pp.     

Evaluation of the best compromise between the urban air quality monitoring resolution by diffusive sampling and resource requirements

The need to collect data representative of overall urban pollution is all-important in order to monitor the population exposure. High spatial resolution monitoring using diffusive samplers allows studying of the urban pollutant distribution, thus enabling deeper investigation of their generation and diffusion mechanisms. Nevertheless, such a monitoring campaign has a certain cost. In this study we point out how to find the best compromise between the number of necessary measurements and the affordable costs for monitoring campaigns. We also describe an innovative method for the proper design of a fixed urban monitoring network by means of preliminary high spatial resolution campaigns using diffusive samplers. Four European capital cities (Dublin, Madrid, Paris and Rome) were monitored six times, each time for seven days. Benzene, toluene, ethylbenzene, xylenes (BTEX) and NO(2) concentrations were measured at 146 sites in Dublin, 293 in Madrid, 339 in Paris and 290 in Rome. Multiscale grids have been drawn which ranged in mesh size from 500 m to 2 km. The statistical processing of data produced a twofold result: the creation of isoconcentration maps with geostatistical procedures, and an algorithm aimed at locating the minimum number of sampling sites where the fixed monitoring stations should be placed. Average urban levels estimated on the basis of these selected sites differ by less than 8% from those calculated on the whole populations of the sampled points. The aim of this work is to investigate how far the resolution of a monitoring campaign of urban pollution by diffusive sampling can be reduced, thus making the monitoring less expensive in terms of human and financial resources, while preserving the same quality of the results that could be achieved with a higher resolution. We found that there is no significant loss of information when the resolution of the monitoring grid for BTEX is lowered to a mesh size of 1.85 km, that is a sampling site each 3.4 km(2), and that the minimum number of sampling sites to be used is N = 0.29 A, where A is the urban surface to be monitored (in km(2)). As the spatial distribution of NO(2) is less sensitive to the distance from the emission source than that of BTEX, this relationship could be retained as a valid lower limit for the mesh grid size also for NO(2) monitoring.     

Poliovirus and Other Enteroviruses from Environmental Surveillance in Italy, 2009–2015

Within the initiatives for poliomyelitis eradication by WHO, Italy activated an environmental surveillance (ES) in 2005. ES complements clinical Acute Flaccid Paralysis (AFP) surveillance for possible polio cases, detects poliovirus circulation in environmental sewage, and is used to monitor transmission in communities. In addition to polioviruses, the analyses comprised: (i) the monitoring of the presence of non-polio enteroviruses in sewage samples and (ii) the temporal and geographical distribution of the detected viruses. From 2009 to 2015, 2880 sewage samples were collected from eight cities participating in the surveillance. Overall, 1479 samples resulted positive for enteroviruses. No wild-type polioviruses were found, although four Sabin-like polioviruses were detected. The low degree of mutation found in the genomes of these four isolates suggests that these viruses have had a limited circulation in the population. All non-polio enteroviruses belonged to species B and the most frequent serotype was CV-B5, followed by CV-B4, E-11, E-6, E-7, CV-B3, and CV-B2. Variations in the frequency of different serotypes were also observed in different seasons and/or Italian areas. Environmental surveillance in Italy, as part of the ‘WHO global polio eradication program’, is a powerful tool to augment the polio surveillance and to investigate the silent circulation or the re-emergence of enteroviruses in the population.