Accumulation, speciation and cellular localization of copper in Sesbania drummondii

Growth, accumulation and intracellular speciation and distribution of copper (Cu) in Sesbania drummondii was studied using scanning-electron microscopy (SEM), X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS). The growth of seedlings was assessed in terms of biomass accumulation. The growth of the seedling was enhanced by 73.5% at a low Cu concentration (50 mg l⁻¹) compared to the control treatment. Additionally, seedling growth was inhibited by 18% at 300 mg l⁻¹ Cu with respect to the control. Copper concentration in roots and shoots was increased with increasing Cu concentration in the growth solution. The accumulation of Cu was found to be higher in roots than in the shoots. At a concentration of 300 mg l⁻¹ Cu, the roots accumulated 27,440 mg Cu kg⁻¹ dry weight (dw) while shoots accumulated 1282 mg Cu kg⁻¹ dw. Seedlings were assessed for photosynthetic activity by measuring chlorophyll a fluorescence parameters: F_v/F_m and F_v/F₀ values. Photosynthetic integrity was not affected by any of the Cu treatments. The X-ray absorption spectroscopic (XAS) studies showed that Cu was predominantly present as Cu(II) in Sesbania tissue. In addition, from the XAS studies it was shown that the Cu exists in a mixture of different coordination states consisting of Cu bound to sugars and small organic acids with some possible precipitated copper oxide. From the EXAFS studies, the coordination of Cu was determined to have four equatorial oxygen(nitrogen) ligands at 1.96 Å and two axial oxygen ligands at 2.31 Å. Scanning-electron microscopy studies revealed the distribution of Cu within the seedlings tissues, predominantly accumulated in the cortical and vascular (xylem) regions of root tissues. In the stem, most of the Cu was found within the xylem tissue. However, the deposition of Cu within the leaf tissues was in the parenchyma. The present study demonstrates the mechanisms employed by S. drummondii for Cu uptake and its biotransformation.     

The effect of triethylene tetramine upon the selective removal of nickel (II), iron (II), manganese (II) and tin (II) in rats

The distribution of Nickel-63, Iron-59, Manganese-54 and Tin-113 in plasma was studied in rats which received single intravenous (i.v.) injection of aqueous solutions of their salts alone, and in rats which also received single intramuscular (im) injection of triethylene tetramine (TETA). TETA was extremely effective in reducing the plasma concentration of Nickel-63 followed by that of Iron-59, Manganese-54 and Tin-113.     

Application of ameliorated wood pulp to recover Cd(II), Pb(II), and Ni(II) from e-waste

In this study, dl-malic acid and hydrogen peroxide were used as leaching agents to remove metals from e-waste (printed-circuit boards) and itaconic acid-grafted poly(vinyl alcohol)-encapsulated wood pulp (IA-g-PVA-en-WP) to uptake metals from leachate with high proficiency [11.63 mg g^?1; 93.03 % for Cd(II), 11.90 mg g^?1; 95.18 % for Pb(II), and 12.14 mg g^?1; 97.08 % for Ni(II)]. Metals were recovered from the loaded biosorbent by desorption studies. The standard analytical techniques, such as elemental analysis, Fourier-transform-infrared spectroscopy, scanning electron microscopy, atomic force microscopy, and thermogravimetric analysis, were used to characterize the recovering agent (biosorbent). At equilibrium, the metal uptake data were fitted to Langmuir and D–R isotherms (R ² > 0.99) significantly, revealing, the homogeneous distribution of active sites on biosorbent’s backbone. The possible mechanism appeared to be ion exchanges of metal ions with H⁺ together with binding over functionalities (COO^?). Dimensionless equilibrium parameter (R _L) showed the favourability of metal uptake at lower concentration, while mean adsorption energy (E) certified the physical binding of metal on functionalities which was further confirmed by sticking probability and activation energy parameters. Reusability studies were also conducted to state the performance of biosorbent.     

Studies on the protein binding mechanism of p-aninodiphenylamine: A hair dye constituent

p-Aminodiphenylamine (p-ADPA) has got a binding capacity with tissue proteins. Aspartic and glutamic acids are presumably the responsible units in the protein chain involved in this binding with p-ADPA. p-ADPA is changed into a quinone structure after atmospheric oxidation in Krebs-Ringer-Bicarbonate buffer, pH 7.4 in the presence of trace metal ions. This oxidised form of p-ADPA binds with aspartic acid at pH 7.4 and temperature 40° in 2 hrs. The derivative thus formed absorbs at 450 nm instead of 430 nm.     

Free radical biology in neurological manifestations: mechanisms to therapeutics interventions

Environmental Science and Pollution Research - Recent advancements and growing attention about free radicals (ROS) and redox signaling enable the scientific fraternity to consider their involvement...     

Single and multiple daily dose toxicokinetics of fluoride after oral administration of sodium fluoride along with aluminum sulfate in goats

Our previous study suggested that toxicokinetic parameters of fluoride were significantly changed on the 30th day as compared with 1st day, after repeated oral administration of sodium fluoride alone for 30 days in goats. The purpose of this study was to investigate whether aluminum sulfate has ameliorative effect on the toxicokinetics of fluoride. For this, sodium fluoride (20 mg kg^?1 b. wt.) along with aluminum sulfate (150 mg kg^?1 b. wt.) was administered in goats for 30 days to investigate its effect on toxicokinetics of fluoride on days 1 and 30. The fluoride levels against time were adequately described by one compartment open model. The peak plasma level of fluoride was observed at 2 h. The toxicokinetics data revealed a nonsignificant decrease in β (elimination rate constant) and C _max (the maximum plasma concentration) and increase in t _1/2 K _a (absorption half-lives), t _1/2 β (elimination half-lives), area under the plasma (AUC) concentration versus time curve and mean residence time (MRT) was observed for the last dose from their respective first dose values. On the basis of changes in the toxicokinetic parameters, it was concluded that repeated oral administration has cumulative effect on plasma fluoride level and concurrent oral administration of aluminum sulfate has ameliorative action on the toxicokinetics of fluoride in goats.     

Efficient arsenic depollution in water using modified maize powder

This article reports the synthesis of an efficient, low-cost material from maize powder to depollute arsenic-contaminated water. Arsenic is toxic for humans and other organisms even at low concentrations. The most well-known and severe case of arsenic poisoning through drinking water has been found in India and Bangladesh. Numerous inorganic materials have been tested for the removal of arsenic from water bodies over the last two decades. However, all such materials have several disadvantages such as unpredictable arsenic ion removal, high cost and the generation of toxic sludge that is often more difficult to manage. Alternatively, organic material from agricultural waste may be modified to enrich functional groups responsible for As sorption and, in turn, used to depollute contaminated waters. Here, Zea mays cob powder has been modified to remove arsenic species from water. Two modified materials were produced: an aminated maize powder and a thiolated maize powder. Amination was done using epichlorohydrin and dimethylamine. Thiolation was done using thioglycolic acids. Amination increased As (III) sorption from 70 to 75.8 % and As (V) sorption from 85 to 94.42 %, compared with unmodified maize powder. Thiolation increased As (III) sorption from 70 to 81.7 % and As (V) sorption from 85 to 90 %. Amination increased usability cycles from 3 to 5. Thiolation increased usability cycles from 3 to 6. The novel modified maize biosorbent has enough potential for the development of a low-cost technological pre-treatment step, prior to high-tech chemical treatments.     

Study of ultrasonic assisted cryogenically cooled EDM process using sintered (Cu–TiC) tooltip

In most EDM operations, the maximum contribution in the total operation cost is the tool cost. Electrode wear is a major problem in EDM process. Therefore, in this paper, the process performance of sintered copper (Cu)–titanium carbide (TiC) electrode tip in ultrasonic assisted cryogenically cooled electrical discharge machining (UACEDM) has been studied. The performance parameters studied in this paper are electrode wear ratio (EWR), material removal rate (MRR), surface roughness (SR), out of roundness and surface integrity. The process parameters considered in this study are discharge current, pulse on time, duty cycle and gap voltage. Cermet was fabricated, having copper content of 75% and titanium carbide content of 25%, by mixing, pressing, and sintering. The performance of the newly formed cermet electrode tip is compared with conventional copper electrode tip for UACEDM process and analyzed. It has been observed that EWR and out of roundness decreases when cermet electrode tip is used as compared to conventional tooltip. It has also been observed that MRR and SR increase when cermet tooltip is used. The surface cracks density and crack width on workpiece machined by cermet tooltip have been found to be lesser as compared to the specimen machined by conventional tooltip.     

Differential effects of UV-B radiation fluence rates on growth,photosynthesis, and phosphate metabolism in two cyanobacteria under copper toxicity

This work was undertaken to ascertain the impact of different fluence rates of ultraviolet-B (UV-B) radiation on two cyanobacterial biofertilizers, Phormidium foveolarum and Nostoc muscorum, growing under copper toxicity. Copper (2 and 5?µmol?L^?1) and high UV-B fluence rate (UV-B_H; 1.0?µmol?m^?2?s^?1) decreased the growth, pigment content, photosynthetic oxygen yield, phosphate uptake, and acid phosphatase activity in both the strains analyzed after 24 and 72?h of experiments, and combined exposure further enhanced the toxic effects. Respiration and alkaline phosphatase activities were stimulated appreciably. The damaging effect was shown on the order on pigments: phycocyanin?>?chlorophyll a?>?carotenoids, and on photosystems: whole chain photosynthetic reaction?>?photosystem II?>?photosystem I. Partial recovery in the photosystem II activity in the presence of artificial electron donors; diphenyl carbazide (DPC), hydroxylamine (NH₂OH), and manganese chloride (MnCl₂) pointed out the interruption of electron flow on the oxidation side of photosystem II. Unlike UV-B_H, low UV-B fluence rate (UV-B_L; 0.1?µmol?m^?2?s^?1), rather than causing damaging effect partially, alleviated the toxic effects of Cu. This study suggests that the cyanobacterium P. foveolarum is less sensitive against UV-B_H and excess Cu (2 and 5?µmol?L^?1), thus P. foveolarum may be used as a biofertilizer for sustainable agriculture.     

Hydroxychloroquine in COVID-19: therapeutic promises,current status,and environmental implications

Environmental Science and Pollution Research - The outbreak of novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has affected the entire world with its infectious spread and...