DEVELOPMENT OF WATERSIIED MODELS FOR TWO SIERRA NEVADA BASINS USING A GEOGRAPHIC INFORMATION SYSTEM1

ABSTRACT: Techniques were developed using vector and raster data in a geographic information system (GIS) to define the spatial variability of watershed characteristics in the north-central Sierra Nevada of California and Nevada and to assist in computing model input parameters. The U.S. Geological Survey's Precipitation-Runoff Modeling System, a physically based, distributed-parameter watershed model, simulates runoff for a basin by partitioning a watershed into areas that each have a homogeneous hydrologic response to precipitation or snowmelt. These land units, known as hydrologic-response units (HRU's), are characterized according to physical properties, such as altitude, slope, aspect, land cover, soils, and geology, and climate patterns. Digital data were used to develop a GIS data base and HRIJ classification for the American River and Carson River basins. The following criteria are used in delineating HRU's: (1) Data layers are hydrologically significant and have a resolution appropriate to the watershed's natural spatial variability, (2) the technique for delineating HRU's accommodates different classification criteria and is reproducible, and (3) HRU's are not limited by hydrographic-subbasin boundaries. HRU's so defined are spatially noncontiguous. The result is an objective, efficient methodology for characterizing a watershed and for delineating HRU's. Also, digital data can be analyzed and transformed to assist in defining parameters and in calibrating the model.     

USING A GEOGRAPHIC INFORMATION SYSTEM TO DETERMINE THE RELATION BETWEEN STREAM QUALITY AND GEOLOGY IN THE ROBERTS CREEK WATERSHED,CLAYTON COUNTY,IOWA1

ABSTRACT: A geographic information system (GIS) was used to determine the relation between the stream-water quality and underlying geology in Roberts Creek watershed, Clayton County, Iowa, for base-flow conditions during the spring and summer of 1988–90. Geologic, stream, basin and subbasin boundaries, and water-quality sampling-site coverages were created by digitizing available maps. A contour coverage was created from digital line-graph data. The areal extent of geologic units subcropping in each subbasin was quantified with GIS, and the results then were output and joined with the discharge and water-quality data for statistical analyses. Illustrations showing the geology of the study area and the results of the study were prepared using GIS. By using GIS and a statistical software package, a weak but statistically significant relation was found between the water temperature, pH, and nitrogen concentrations in Roberts Creek and the underlying geology during base-flow conditions.     

HYDROLOGIC MODELING WITH REMOTELY SENSED DATABASES1

ABSTRACT: An integrated remotely sensed database was used as the basis for a hydrologic and sediment transport modeling effort for an agricultural area of western Puerto Rico. Classified spectral images of airborne radiance data provided ground cover information and were used in conjunction with topographic and soils data to guide model construction and provide input to the water balance and sediment yield simulations. Runoff and sediment discharge from hydrologically homogeneous regions were routed through the drainage network and combined at the basin outlet. The model was used to simulate four years of observed sediment discharge from the basin. Relative contributions to the total sediment yield of forested and agricultural areas were determined and compared.     

A Conceptual Framework for Selecting and Analyzing Stressor Data to Study Species Richness at Large Spatial Scales

/ In this paper we develop a conceptual framework for selectingstressor data and analyzing their relationship to geographic patterns ofspecies richness at large spatial scales. Aspects of climate and topography,which are not stressors per se, have been most strongly linked withgeographic patterns of species richness at large spatial scales (e.g.,continental to global scales). The adverse impact of stressors (e.g., habitatloss, pollution) on species has been demonstrated primarily on much smallerspatial scales. To date, there has been a lack of conceptual developmenton how to use stressor data to study geographic patterns of speciesrichness at large spatial scales.The framework we developed includes four components: (1) clarification of theterms stress and stressor and categorization of factors affecting speciesrichness into three groups-anthropogenic stressors, natural stressors, andnatural covariates; (2) synthesis of the existing hypotheses for explaininggeographic patterns of species richness to identify the scales over whichstressors and natural covariates influence species richness and to providesupporting evidence for these relationships through review of previousstudies; (3) identification of three criteria for selection of stressor andcovariate data sets: (a) inclusion of data sets from each of the threecategories identified in item 1, (b) inclusion of data sets representingdifferent aspects of each category, and (c) to the extent possible, analysisof data quality; and (4) identification of two approaches for examiningscale-dependent relationships among stressors, covariates, and patterns ofspecies richness-scaling-up and regression-tree analyses.Based on this framework, we propose 10 data sets as a minimum data base forexamining the effects of stressors and covariates on species richness atlarge spatial scales. These data sets include land cover, roads, wetlands(numbers and loss), exotic species, livestock grazing, surface water pH,pesticide application, climate (and weather), topography, and streams.KEY WORDS: Anthropogenic impacts; Biodiversity; Environmental gradients;Geographic information systems; Hierarchy     

Specific Contributions of Politics,Economics, and Toxicology in Setting Socially Consensual Limit Values

/ Limit values are legal limits for the concentrations of substances in the environment. They must be agreed upon in a consensual procedure between science, economics/technology, and political forces. This is a crucial political precondition for their social acceptance. The arguments put forward to justify their expediency and numerical level are based not only on risk-benefit considerations but also on the aspect of the technical avoidability of direct and indirect exposure. The critical assessment of the direct benefit of specified exposures falls within the responsibility of economics/technology, whereas criteria for their potential adverse effects (direct and indirect) are provided by medicine/biochemistry and/or ecology. Within this concept, the avoidance of nonbeneficial-even if not openly adverse-exposure is the essential aim of environmental hygiene and should be promoted by politics/science. In general, society or segments thereof reject adverse, accept beneficial, and tolerate unavoidable exposure. Conflicts of interest arise when different groups of society simultaneously define a given exposure as being adverse, beneficial, and unavoidable. Therefore, from the viewpoint of society as a whole, an optimal exposure lies as far as reasonably achievable at a level lower than known or plausible adverse effect thresholds (as defined by toxicology or ecology). This optimal level of exposure must be determined using a transparent and, hence, public procedure.KEY WORDS: Legal limit values; Benefit threshold; Social acceptance; Social tolerability; Adverse effect threshold; Avoidable exposure; Tolerance threshold; Environmental hygiene     

Appreciating the biodiversity of remnant bushland: an ‘architectural’ approach

Tutor in the Department of Geography at the University of Western Australia. In response to the fragmentation and loss of indigenous vegetation caused by the expansion of metropolitan Perth, all levels of government in Western Australia have made some commitment to the preservation of biodiversity. A case for seeing and using vegetation structure as a possible surrogate for biodiversity is presented. The concept and a simple methodology which may be applied without any specialist ecological knowledge or expertise is outlined for the urban developer, engineer, planner, decision maker and educator. The notion that the degree of diversity of the vegetation structure of a banksia woodland remnant may indicate and give a substitute or preliminary measure of biodiversity assists the popular understanding of biodiversity. Such a non-technical yet objective appreciation and measure may prove satisfactory for some conservation purposes, until a detailed professional assessment is made of the plant and animal species in a remnant of native vegetation. It is currently being used by state planning staff in Western Australia for the preliminary assessment of native woodland in areas zoned for urban growth at the metropolitan fringe.     

A Sensitivity Analysis of Nitrogen Losses from Dairy Farms

International attention has focused on agricultural production systems as non-point sources of pollution affecting the quality of streams, estuaries and ground water resources. The objective of the current study was to develop a model of nitrogen management on the dairy farm, and to perform sensitivity analyses in order to determine the relative importance of manipulating herd nutrition, manure management and crop selection in reducing nitrogen (N) losses from the farm. The importance of the method of N input to the farm (purchased feed, legume fixation, inorganic fertilizer, imported manure) was investigated, and the potential to reduce N losses from dairy farms was evaluated. Nitrogen balance equations were derived, and related efficiency coefficients were set to reference values representing common management practices. Total farm N efficiency (animal product N per N input), and N losses per product N were determined for different situations by solving the set of simultaneous equations. Improvements in animal diet and management that increase the conversion of feed N to animal product by 50% would increase total farm N efficiency by 48% and reduce N losses per product by 36 to 40%. In contrast, reducing losses from manure collection, storage and application to improve the percentage of manure N that becomes available in soil by 100% would only improve total farm N efficiency by 13% and reduce total N losses by 14%. Selecting crops and management that can use soil nutrients 50% more efficiently would improve total farm efficiency by up to 59% and reduce N losses by up to 41% depending on the predominant nitrogen sources to the farm. Legume production would reduce N losses per product compared with non-legumes. There was more than a five fold difference in N losses per animal product N between the most extreme scenarios suggesting considerable opportunity to reduce N losses from dairy farms.     

DRY STREAM REACHES IN CARBONATE TERRANES: SURFACE INDICATORS OF GROUND-WATER RESERVOIRS1

ABSTRACT: The method of identifying dry stream reaches in carbonate terrane as surface indicators of potential ground-water reservoirs offers a valuable exploration technique that is more rapid and less expensive than traditional exploration methods involving random test drilling. In areas where dry stream reaches occur, subsurface drainage successfully competes with surface drainage, and sheet-like dissolution openings have developed parallel to bedding creating the ground-water reservoir. The occurrence and hydraulic characteristics of such reservoirs are highly variable, as attested to by the wide range of well yields. Union Hollow in south-central Tennessee is the setting for a case study that illustrates the application of the dry stream reach technique. In this technique, dry stream reach identification is based on two types of readily acquired information: (1) remotely sensed black and white infrared aerial photography; and (2) surface reconnaissance of stream channel characteristics. Test drilling in Union Hollow subsequent to identification of the dry reach proved that a localized ground-water reservoir was present.     

FUNDAMENTAL INVESTIGATION OF GRAVITY CURRENTS WITH VARYING DENSITY1

ABSTRACT: A one-dimensional, gradually varying, non-uniform, flow equation is developed to describe the movement of a variable density gravity current through a reservoir. A linearly decreasing underflow density function is used to investigate the effect of in-reservoir density reduction on typical gravity current flow profiles. Only two types of flow profiles are found to exist for varying density underflows: Type I profiles where the underflow asymptotically approaches a horizontal surface, and Type III profiles where the underflow vertically approaches critical depth. Type I profiles pass through a transitional depth as the underflow density approaches that of the upper layer. Results indicate that a reservoir can be segmented into four distinct spatial regions with well defined flow profile characteristics. The location of these regions allows the sketching of interfacial flow profiles along with identifying the location of transitional depth conditions. Transitional depth conditions are utilized as the logical starting point for Type I flow profile numerical computation. (KEY WORDS: density; fluid flow; reservoirs; hydraulics.)     

SHORT-TERM FORECASTING OF SNOWMELT RUNOFF USING ARMAX MODELS1

ABSTRACT: Time series models of the ARMAX class were investigated for use in forecasting daily riverflow resulting from combined snowmelt/rainfall. The Snowmelt Runoff Model (Martinec-Rango Model) is shown to have a form similar to the ARMAX model. The advantage of the ARMAX approach is that analytical model identification and parameter estimation techniques are available. In addition, previous forecast errors can be included to improve forecasts and confidence limits can be estimated for the forecasts. Diagnostic checks are available to determine if the model is performing properly. Finally, Kalman filtering can be used to allow the model parameters to vary continuously to reflect changing basin runoff conditions. The above advantages result in improved flow forecasts with fewer model parameters.