Oxygen supply for oxyfuel CO2 capture

This paper presents the results of a study to develop Air Products’ air separation unit (ASU) offerings for oxyfuel coal CO₂ capture projects. A scalable “reference plant” concept is described to match particular sizes of power generation equipment, taking into account factors such as safety, reliability, operating flexibility, efficiency, and low capital cost. We describe the selection of a process cycle to exploit the low purity requirements, as well as the options for compression machinery and drivers as the scale of the plant increases and the sizes of referenced equipment limit the possibilities. We also explore integration with other elements of the system, such as preheating condensate or heating and expanding pressurised nitrogen. In addition, we consider how the ASU affects the flexibility of the oxyfuel system and discuss how its power consumption can be reduced during periods of high power demand. Finally, the advantages and disadvantages of different execution strategies for air separation unit projects are discussed, as well as alternative commercial models for the supply of oxygen.     

Silver near municipal wastewater discharges into western Lake Ontario,Canada

Because of the widespread use of silver nanoparticles in commercial products, discharges of municipal wastewater may be a point source of silver in the aquatic environment. We monitored two sites in western Lake Ontario impacted by discharges from wastewater treatment plants serving the City of Toronto. Concentrations of silver were elevated in bottom sediments and suspended sediments collected at the two sites. We also deployed two types of passive samplers in the water column at the two sites, the newly developed Carbon Nanotube Integrative Samplers for monitoring “CNIS-labile” silver and Diffusive Gradient in Thin Film samplers for monitoring “DGT-labile” silver. Results from these passive samplers indicated that the concentrations of silver at the two sites were either below detection limits or were in the ng/L range. In laboratory experiments where the sediments were re-suspended in Milli-Q water, a small proportion of the silver (i.e., <?25%) was labile and partitioned as colloidal or dissolved silver into the liquid phase after agitation. Nanoparticles tentatively identified as silver nanoparticles were detected by single-particle ICP-MS in suspension after agitation of both suspended and bottom sediments. Therefore, there is a need to assess whether silver species, including silver nanoparticles are transported from wastewater treatment plants into sediments in the aquatic environment. This study is unique in focusing on the in situ distribution of silver in natural waters and in sediments that are potentially impacted by urban sources of nanoparticles.     

Assessment using CFD of the wind direction on the air discharges caused by natural ventilation of a poultry house

Air inside poultry houses must be removed on a regular basis to prevent excess of heat, particles and noxious gases that can imperil animals. To cope with this issue, natural ventilation could be an effective method when assisted by accurate predictions. This study investigates air discharges caused by natural ventilation of a poultry house by means of a three-dimensional computational fluid dynamics (CFD) model. It solves the governing equations of momentum, heat and mass transport, radiative transfers and animal-generated heat. Wind directions of 0°, 36° and 56° (0° corresponds to a wind blowing perpendicular to the ridgeline) were investigated; the CFD model predictions achieved a RMSE of 1.2 °C and 0.6 g[H₂O] kg^?1 [dry air] for internal temperature and absolute humidity, respectively, when air blew with an angle of 36°. Air renewal rates (ARR) were 39.5 (±?1.9), 34.9 (±?2.2) and 33.6 (±?1.7) volumes of the building per hour, when air blew at 0°, 36° and 56°, respectively. Such ARR predictions served to know how the gases contained in air would likely spread downstream from the building in order to define regions of potentially high gas concentration that could endanger neighbouring habitable facilities.     

Perceptions of observed and model values of male and female managers

To provide evidence of the relationship between expectations for the values that should be exhibited for effective performance by female and male managers and their actual values, data were used that had been collected as part of a leadership program conducted for managers of business organizations in the United States. From a pool of approximately 700 managers, samples were drawn of 130 male and 130 female managers. As part of leadership program, the managers had completed 26-item SYMLOG value questionnaires, rating themselves and the values they judged to be effective for a manager. Prior to their participation in the program, sets of ratings were made by the coworkers of each manager, rating the actual values of the manager and the coworkers' ideal profile for the manager. The questionnaire covers three dimensions of values: dominant versus submissive, friendly versus unfriendly, and accepting the task-orientation of established authority versus opposing it. Comparisons were made of self and coworkers' ratings on the observed (self/actual) and model (effective/ideal) values of female and male managers with ‘matched’ samples that include only female and male managers with similar ratings of actual values, as judged by their coworkers, by removing the ratings of ‘outliers’. The only significant difference in gender ratings that remains is that female managers rate themselves as more positive. There are more differences between observed and model ratings. Managers and their coworkers believe that model managers should be more dominant and friendly than they are rated to be. However the managers also believe that they should be more task-oriented while their coworkers believe that they should be less task-oriented. The majority of the female managers dropped from the matched sample because no matching male could be found were more dominant and positive and less task-oriented, thus closer to the stereotype role for females. © 1997 John Wiley & Sons, Ltd.     

Relationships between water mass characteristics and estimates of fish population abundance from trawl surveys

The Canadian Department of Fisheries and Oceans conducts annual bottom trawl surveys to monitor changes in the abundance of the major commercially important groundfish populations. Some of these surveys have been in operation for almost 20 yr. The estimates from these surveys often indicate rapid changes in abundance over time beyond that expected from the population dynamics of the fish. Much of this interannual change has been interpreted as variation, the magnitude of which has often made it difficult to measure anything but the most severe effects of fishing, pollution or any other intervention on the population. Recent studies have shown that some of this variation may be attributed to changes in catchability of fish due to the effects of environmental variables on fish distribution. Annual changes in abundance as estimated from such field surveys may be confounded by changes in catchability due to annual changes in environmental conditions. In this study, trawl catches of age 4 Atlantic cod (Gadus morhua) from surveys conducted during March 1979–1988 were compared with concurrent measurements of bottom salinity, temperature and depth. Large catches of age 4 cod are more likely to occur in water characterized as the intermediate cold layer defined by salinities of 32–33.5 and temperatures<5°C. This relationship also appears to be modified by depth. We further show that internnual changes in the estimated abundance from the surveys were, in a number of cases, coincident with changes in the proportion of the bottom water composed of the intermediate cold water layer. The implications that these patterns may have on interpreting trends in the estimates of abundance from trawl surveys are discussed.     

Introduction: General versus specific measures and the special case of core self‐evaluations

This paper introduces a Journal of Organizational Behavior point/counterpoint exchange (this issue) that focuses on the appropriate level of aggregation primarily in the assessment of personality in general and core self‐evaluations (CSE) in particular. Gilad Chen reviews arguments for and against the higher‐order construct of CSE, offering a number of recommendations for strengthening it. Timothy Judge and John Kammeyer‐Mueller offer a defense of CSE, and then extend the discussion to the measurement of other constructs beyond the personality domain. Together these two papers provide important insights about the appropriate level of aggregation of individual measures, and situations in which higher‐order versus lower‐order measures might be preferred. Copyright © 2011 John Wiley & Sons, Ltd.     

Gender differences and demographic influences in perceived concern for driver safety and support for impaired driving countermeasures

IntroductionDriving safety, impaired driving, and legislation to address these concerns remain important issues. It is imperative countermeasures be targeted toward the most appropriate groups. This paper explores the potential relationship between gender and driving attitudes toward safety issues and impaired-driving countermeasures.MethodThe data are from the 2007 Impaired Driving Survey commissioned by Transport Canada and Mothers Against Drunk Driving (MADD) Canada. The survey is a, stratified by region, telephone survey of 1,514 Canadian drivers 18 years of age and older with a valid driver's license who had driven within the past 30 days.ResultsThe findings illustrate a consistent impact of gender on these issues. Other variables were also identified as relevant factors although less consistently. Current findings suggest that strategies for building support for interventions, or for changing risk perception/concern for risky driving behaviors should be tailored by gender to maximize the potential for behavior change.ImpactThis information may assist program and policy developers through the identification of more or less receptive target groups. Future research directions are also presented.     

Fugitive emissions in chemical processes: The assessment and prevention based on inherent and add-on approaches

Fugitive emissions are among the major concerns of industrial process releases. The emissions cause problem to various aspects including the environment, health, and economic. Early evaluation of process hazards is beneficial because process can be made inherently benign at lower cost. This paper discusses two important aspects of fugitive emissions assessment during process design – the quantification and the prevention strategies.For the quantification part, three methods are presented for fugitive emissions estimation during the process design. They are tailored to data available in simple process flow diagram (PFD), detailed PFD, and piping & instrumentation diagram (PID). Such methods are needed as early emissions estimation allows production routes and process designs with lower emissions to be selected. The fugitive emissions estimation and methods to abatement are demonstrated on a benzene process case study. Valves are found to be the major emission source with 50% of fugitive emissions of process area in a base case of petrochemical process, in which no fugitive emission reductions are yet made. Pumps without mechanical seals come second with 30% and flanges with 8% of emissions. Inherently safer design keywords can be applied to prevent fugitive emissions in the process plants. Substitution is the most applicable keyword in fugitive emission reduction of existing plants.The emission rate calculations together with estimation of health risk give a sound background for the decision making on elimination of emissions at source through equipment and piping changes. The case study presented reveals that by substituting emission prone components by inherently low-leaking ones, the plant emissions can be reduced over 90% in practice. This is created mainly by replacing rising stem valves with ball valves, installing double mechanical pump seals or hermetic pumps and making changes in sampling and relief systems. Ideally by also changing flanges to welded connections, which is not viable for various reasons, the emissions could be reduced nearly to zero.