Levels of organohalogenated persistent pollutants in human milk from Kahramanmaraş region, Turkey

The levels of 1,1,1-trichloro-bis-2,2'-(4-chlorophenyl) ethane (p,p'-DDT) and its metabolites, hexachlorobenzene (HCB), hexachlorocyclohexane isomers (HCHs), chlordanes (trans- and cis-chlordane, oxychlordane and trans-nonachlor), 11 polychlorinated biphenyl (PCB) congeners, and 7 polybrominated diphenyl ether (PBDE) congeners were measured in 37 individual human milk samples from Kahramanmara? region, Turkey. Organochlorine pesticides were the major contaminants in the milk samples. p,p'-DDE and p,p'-DDT were detected in all samples, while beta-HCH had a detection frequency of 97%. The sum of the DDTs in human milk samples varied between 0.52 and 315.8 ng/g wet weight (ww) with a mean ratio between p,p'-DDE and p,p'-DDT equal to 31.1. p,p'-DDD could be measured only in six samples. beta-HCH was the most prevalent HCH isomer with a mean value of 2.08 ng/g ww. The mean concentration of gamma-HCH was 0.38 ng/g ww, while alpha-HCH was not detected in any sample. HCB is found in 95% of the milk samples with a mean concentration of 0.30 ng/g ww. The mean value for the sum of chlordanes was 0.39 ng/g ww, with oxychlordane and trans-nonachlor being the principal contributors. PCBs could be measured only in 8 out of 37 samples and their concentration ranged between <0.15 and 1.92 ng/g ww for the sum of PCBs. PCB profiles were dominated by congeners 153, 180 and 138. PBDEs were detected only in 3 out of 37 samples, with the highest value being 0.014 ng/g ww (0.40 ng/g lipid weight) and BDE 47 was the dominant congener. Although the number of samples is relatively low and they are not representative for the whole Turkish population, the results of the present study are important to provide additional data on the concentrations of persistent organochlorinated pollutants in Turkey and show as first the PBDE levels in Turkish population.     

The Clean Development Mechanism and Sustainable Development in China''''s Electricity Sector

1 INTRODUCTIONEnergy and environmental issues in China have receivedsignificant attention in both the peer-reviewed literatureand in international energy and environmental policymaking in the last number of years. China's coal dominatedenergy consumption results in significant regional pollutionproblems, most notably acid rain that affects nearly 1/3rdof China's landmass and air pollution that plagues manyof its major cities. China now ranks as the top emitterof sulphur dioxide (SO2) pol…     

A novel sigma coordinate system to simulate abrupt changes of underwater terrain in a hydrodynamic model: application to Lake Mead,USA

The sigma (SIG) coordinate system in ocean circulation simulation models results inevitably in horizontal pressure gradient error. This problem also emerges in models of deep lakes or reservoirs with the same characteristics of underwater terrain mutation. SIG coordinates reflect vertical relative stratification but cannot be used to calculate horizontal pressure gradient force in places with drastic topographic changes; this results in vertical water temperature and circulation errors. In deep lakes or reservoirs, differences in water density caused by the temperature difference between upper and lower water bodies is the primary cause of thermal stratification phenomena. Lake Mead was used as a case study on steep topography based on Environmental Fluid Dynamics Code (EFDC) model in this study. SIG coordinates result in close agreement between the calibrated temperature time series at the top and middle water layers, but disparity in the bottom water layer. The error emerges in the horizontal pressure gradient error due to the SIG coordinate transformation. Neither increasing the vertical resolution nor adjusting the horizontal viscosity coefficient resolve this error. We test the sigma-zed (SGZ) coordinate which combines Z coordinate and SIG coordinate as a replacement for the SIG coordinate to find that they effectively reduce the model’s runtime and simulation efficiency. The vertical temperature distribution in SGZ coordinate mode is more accurate than the distribution in SIG coordinate mode. The Navier-Stokes horizontal gradient and advection diffusion equation results under SIG coordinates are very sensitive to the pressure gradient. The replacement also enhances resolution near the thermocline, facilitates reclosing of the water bottom and the equal sigma surface, lends significant advantages in terms of vertical temperature in the simulation for local deep water with steep terrain, and shortens runtime for 0.14 h. SGZ mixed coordinates are recommended in the simulation of deep lakes or reservoirs wherein the underwater topography is large (with abundant continuous deep trenches or reefs).

     

Epidemiological assessment of antibiotic residues in dairy farm milk and farm waste and water in northern India

Environmental Science and Pollution Research - Antibiotics are frequently used in the dairy sector for prophylactic uses along with therapeutic purposes. Throughout the globe, antibiotic resistance...     

Characterization of metal adsorption kinetic properties in batch and fixed-bed reactors

Copper adsorption kinetic properties in batch and fixed-bed reactors were studied in this paper. The isothermal adsorption experiments showed that the copper adsorption capacity of a granular activated carbon (Filtrasorb 200) increased when ionic strength was higher. The presence of EDTA diminished the adsorption. An intraparticle diffusion model and a fixed-bed model were successfully used to describe the batch kinetic and fixed-bed operation behaviors. The kinetics became faster when the solution pH was not controlled, implying that the surface precipitation caused some metal uptake. The external mass transfer coefficient, the diffusivity and the dispersion coefficient were obtained from the modeling. It was found that both external mass transfer and dispersion coefficients increased when the flow rate was higher. Finally effects of kinetic parameters on simulation of fixed-bed operation were conducted.     

Feasibility of coupling a thermal/optical carbon analyzer to a quadrupole mass spectrometer for enhanced PM2.5 speciation

A thermal/optical carbon analyzer (TOA), normally used for quantification of organic carbon (OC) and elemental carbon (EC) in PM_2.5 (fine particulate matter) speciation networks, was adapted to direct thermally evolved gases to an electron impact quadrupole mass spectrometer (QMS), creating a TOA-QMS. This approach produces spectra similar to those obtained by the Aerodyne aerosol mass spectrometer (AMS), but the ratios of the mass to charge (m/z) signals differ and must be remeasured using laboratory-generated standards. Linear relationships are found between TOA-QMS signals and ammonium (NH₄⁺), nitrate (NO₃^?), and sulfate (SO₄^2-) standards. For ambient samples, however, positive deviations are found for SO₄^2-, compensated by negative deviations for NO₃^?, at higher concentrations. This indicates the utility of mixed-compound standards for calibration or separate calibration curves for low and high ion concentrations. The sum of the QMS signals across all m/z after removal of the NH₄⁺, NO₃^?, and SO₄^2- signals was highly correlated with the carbon content of oxalic acid (C?H?O?) standards. For ambient samples, the OC derived from the TOA-QMS method was the same as the OC derived from the standard IMPROVE_A TOA method. This method has the potential to reduce complexity and costs for speciation networks, especially for highly polluted urban areas such as those in Asia and Africa.

Implications: Ammonium, nitrate, and sulfate can be quantified by the same thermal evolution analysis applied to organic and elemental carbon. This holds the potential to replace multiple parallel filter samples and separate laboratory analyses with a single filter and a single analysis to account for a large portion of the PM_2.5 mass concentration.     

Limitations of recreational camera traps for wildlife management and conservation research: A practitioner’s perspective

The availability of affordable ‘recreational’ camera traps has dramatically increased over the last decade. We present survey results which show that many conservation practitioners use cheaper ‘recreational’ units for research rather than more expensive ‘professional’ equipment. We present our perspective of using two popular models of ‘recreational’ camera trap for ecological field-based studies. The models used (for >2 years) presented us with a range of practical problems at all stages of their use including deployment, operation, and data management, which collectively crippled data collection and limited opportunities for quantification of key issues arising. Our experiences demonstrate that prospective users need to have a sufficient understanding of the limitations camera trap technology poses, dimensions we communicate here. While the merits of different camera traps will be study specific, the performance of more expensive ‘professional’ models may prove more cost-effective in the long-term when using camera traps for research.     

Handling data uncertainties in event tree analysis

Event tree analysis (ETA) is an established risk analysis technique to assess likelihood (in a probabilistic context) of an accident. The objective data available to estimate the likelihood is often missing (or sparse), and even if available, is subject to incompleteness (partial ignorance) and imprecision (vagueness). Without addressing incompleteness and imprecision in the available data, ETA and subsequent risk analysis give a false impression of precision and correctness that undermines the overall credibility of the process. This paper explores two approaches to address data uncertainties, namely, fuzzy sets and evidence theory, and compares the results with Monte Carlo simulations. A fuzzy-based approach is used for handling imprecision and subjectivity, whereas evidence theory is used for handling inconsistent, incomplete and conflicting data. Application of these approaches in ETA is demonstrated using the example of an LPG release near a processing facility.