Characterization of the ignition by repetitive streamer discharges using laser diagnostics

Repetitive streamer discharges caused by transients, e.g. due to high frequency overvoltages, can ignite combustible mixtures, which has to be taken into account concerning the safety assessment of electrical apparatus for usage in hazardous areas. Hydrogen/air mixtures were ignited inside a closed vessel using a rod/plane electrode configuration. Alternating voltage with a frequency between 600 and 750 kHz and amplitudes of up to 20 kV was used to produce streamer discharges. The ignition process and the subsequent flame front propagation were examined with respect to mixture composition and several electrical parameters using time-resolved measurements of planar laser-induced fluorescence (PLIF) of OH radicals. A multiple pulse laser and detection system was used to assemble four images during one experiment. These measurements have given detailed information about the point of ignition and flame velocities. The experimental results will be used to validate numerical simulations of ignition by streamer discharges, which will yield deep insights into this specific ignition process.     

The overgeneralized validity of validity generalization

This Incubator contends that the concept of validity generalization has been overgeneralized in its capacity to predict work performance for three reasons: sampling bias in the occupations selected for analysis, the prediction of acceptable performance to the exclusion of superior performance, and the conflation of statistical prediction and psychological meaning. Copyright © 2013 John Wiley & Sons, Ltd.     

Explosibility of micron- and nano-size titanium powders

Explosibility of micron- and nano-titanium was determined and compared according to explosion severity and likelihood using standard dust explosion equipment. ASTM methods were followed using a Siwek 20-L explosion chamber, MIKE 3 apparatus and BAM oven. The explosibility parameters investigated for both size ranges of titanium include explosion severity (maximum explosion pressure (P_max) and size-normalized maximum rate of pressure rise (K_St)) and explosion likelihood (minimum explosible concentration (MEC), minimum ignition energy (MIE) and minimum ignition temperature (MIT)). Titanium particle sizes were ?100 mesh (<150 μm), ?325 mesh (<45 μm), ≤20 μm, 150 nm, 60–80 nm, and 40–60 nm. The results show a significant increase in explosion severity as the particle size decreases from ?100 mesh with an apparent plateau being reached at ?325 mesh and ≤20 μm. Micron-size explosion severity could not be compared with that for nano-titanium due to pre-ignition of the nano-powder in the 20-L chamber. The likelihood of an explosion increases significantly as the particle size decreases into the nano range. Nano-titanium is very sensitive and can self-ignite under the appropriate conditions. The explosive properties of the nano-titanium can be suppressed by adding nano-titanium dioxide to the dust mixture. Safety precautions and procedures for the nano-titanium are also discussed.     

Quantifying the effect of strong ignition sources on particle preconditioning and distribution in the 20-L chamber

Computational fluid dynamics is used to investigate the preconditioning aspect of overdriving in dust explosion testing. The results show that preconditioning alters both the particle temperature and distribution prior to flame propagation in the 20-L chamber. A parametric study gives the fluid pressure and temperature, and particle temperature and concentration at an assumed flame kernel development time (10 ms) for varying ignitor size and particle diameter. For the 10 kJ ignitor with 50% efficiency, polyethylene particles under 50 μm reach 400 K and may melt prior to flame propagation. Gases from the ignitor detonation displace the dust from the center of the chamber and may increase local particle concentration up to two times the nominal value being tested. These effects have important implications for explosive testing of dusts in the 20-L chamber and comparing to larger 1-m³ testing, where these effects may be negligible.     

Dynamic safety analysis of process systems by mapping bow-tie into Bayesian network

Among the various techniques used for safety analysis of process systems, bow-tie (BT) analysis is becoming a popular technique as it represents an accident scenario from causes to effects. However, the BT application in the dynamic safety analysis is limited due to the static nature of its components, i.e. fault tree and event tree. It is therefore difficult in BT to take accident precursors into account to update the probability of events and the consequent risk. Also, BT is unable to represent conditional dependency. Event dependency is common among primary events and safety barriers. The current paper illustrates how Bayesian network (BN) helps to overcome these limitations. It has also been shown that BN can be used in dynamic safety analysis of a wide range of accident scenarios due to its flexible structure. This paper also introduces the application of probability adapting in dynamic safety analysis rather than probability updating. A case study from the U.S. Chemical Safety Board has been used to illustrate the application of both BT and BN techniques, with a comparison of the results from each technique.     

Modelling the mitigation of a hydrogen deflagration in a nuclear waste silo ullage with water fog

During the decommissioning of certain legacy nuclear waste storage plants it is possible that significant releases of hydrogen gas could occur. Such an event could result in the formation of a flammable mixture within the silo ullage and, hence, the potential risk of ignition and deflagration occurring, threatening the structural integrity of the silo. Very fine water mist fogs have been suggested as a possible method of mitigating the overpressure rise, should a hydrogen–air deflagration occur. In the work presented here, the FLACS CFD code has been used to predict the potential explosion overpressure reduction that might be achieved using water fog mitigation for a range of scenarios where a hydrogen–air mixture, of a pre-specified concentration (containing 800 L of hydrogen), uniformly fills a volume located in a model silo ullage space, and is ignited giving rise to a vented deflagration. The simulation results suggest that water fog could significantly reduce the peak explosion overpressure, in a silo ullage, for lower concentration hydrogen–air mixtures up to 20%, but would require very high fog densities to be achieved to mitigate 30% hydrogen–air mixtures.     

Support of sustainable management of nitrogen contamination due to septic systems using numerical modeling methods

Nitrogen contamination is a serious concern to sustainable environmental management, and one important source of nitrogen contaminant is due to wastewater treatment using onsite sewage treatment and disposal systems (OSTDS, a.k.a., septic systems). This paper presents a study in which numerical modeling is used to support sustainable decision-making and management of nitrogen contamination by utilizing a recently developed GIS-based software, VZMOD, a Vadose Zone MODel for simulating nitrogen transformation and transport in vadose zone between drainfield of septic systems and water table. VZMOD is based on a physical model of unsaturated flow and nitrogen transformation and transport, and the model is solved numerically using the finite element methods. This is the major difference between VZMOD and other GIS-based software of nitrogen modeling. Using GIS techniques, VZMOD considers spatial variability of a number of hydrogeologic parameters such as hydraulic conductivity and porosity. A unique feature of VZMOD is that VZMOD addresses spatial variability of water table by using VZMOD together with ArcNLET, an ArcGIS-based software developed to simulate groundwater flow and nitrate load from septic systems to surface water bodies. VZMOD is designed to execute in different modes to be compatible with different levels of data availability in various management projects of nitrogen contamination. This paper presents an application of VZMOD at a neighborhood with hundreds of septic systems and heterogeneous hydraulic conductivity, porosity, and water table depth. The modeling results indicate that using septic systems at the considered neighborhood is unsustainable and more management means are necessary.     

Environmental ascription in Worcester County,MA: toxic pollution and education outcomes

This paper argues that important issues of sustainable development have been addressed through single-issue landscape plans, and that these plans have carried little weight within the land use decision-making process. A more consolidated approach, based on multi-function landscape plans, is proposed. After reviewing the range of plans which, in the UK, cover woodland, farmscapes, visual amenity, coasts, catchments and biodiversity, the case is made for an integrative plan capable of addressing natural resource issues at the landscape scale. The preliminary character of an integrative plan is outlined. Whilst landscape plans have a relatively weak basis for implementation, it is concluded that a sufficient range of powers is available to ensure some progress.     

Home energy efficiency grants and advice: findings from the English Midlands

Research was conducted in Nottinghamshire, England to investigate public attitudes regarding home energy efficiency issues. Quantitative data were collected in the form of a postal survey, achieving over three hundred responses. Additionally, predominantly qualitative data were collected in semi-structured interviews in 15 homes. The issues investigated included the grant-funded energy efficiency measures installed by the public, the organisations providing grants, the means by which the recipients were referred to the organisations, and the public's preferences regarding energy efficiency advice. Findings were made about the local authority's success in encouraging the take-up of energy efficiency grants, about the public's preferences for the means by which advice should be provided, about trust relating to energy efficiency grants provided by gas and electricity suppliers, and about people's knowledge of the most effective energy efficiency measures. Additional findings were drawn about specific energy efficiency issues, including old heating systems and compact fluorescent light bulbs.     

The emergence of the transition movement in Canada: success and impact through the eyes of initiative leaders

ABSTRACT

Originating in the UK in 2006, the Transition movement is oriented to local grassroots citizen-led efforts that prepare for and support a societal energy transition to a low-carbon future in response to climate change, peak oil, ecological degradation, and economic instability. Overlapping significantly with relocalization, degrowth/slow growth, local food, and related movements, and based on permaculture principles and a distributed network model, it embraces the opportunity to turn crisis into an opportunity to build more resilient, convivial, and vibrant local communities, declaring that “if it’s not fun, it’s not sustainable”. The Transition approach has spread rapidly around the world, including initiatives in over 100 communities and cities in Canada. This paper reports on the methods and results of a Canadian community-based research study aimed at understanding how and where the movement has taken root across the country, what Transition practice looks like, challenges and opportunities encountered, and lessons learned that could be applied within the movement and by others interested in the role of citizen-led initiatives for sustainability transition. Utilising a practice theory lens, drawing on an extensive web-scan of the movement’s online presence, a survey and interviews with initiative (co)founders, an e-survey of Transition members/participants, regional “structured story-dialogue” workshops, and key informant interviews, and informed by input from a Movement Advisory Group, we describe the research process and explore what success and impact mean to those most active in the movement.