Disease suppression on greenhouse tomatoes using plant waste compost

This study investigated the disease suppression abilities of a compost amendment that was added to the conventional growing medium, yellow cedar sawdust, used in most British Columbia vegetable greenhouses. The compost amendment was produced in a controlled, in-vessel process primarily from greenhouse crop waste materials. The pathogen and cultivar under study were Fusarium oxysporum f. sp. radicis-lycopersici (FORL) on Dombito (FORL-susceptible) beefsteak greenhouse tomatoes. Significant reduction of Fusarium crown and root rot was also realized in tomato seedlings by applying compost amendment from several different batches, as a seed cover or plug substitute. In a greenhouse trial, disease suppression using a mixture of 2:1 sawdust to amendment by volume was shown to be most effective. As a result, the tomato yield over a nine-month growing season was improved by 74% where the medium was deliberately infested with FORL.     

Comparison of PM2.5 carbon measurement methods in Hong Kong, China

Samples from Hong Kong, China, were analyzed for organic carbon (OC), elemental carbon (EC), and total carbon (TC) by three thermal protocols (low-temperature IMPROVE and high-temperature STN and NIOSH) and two optical monitoring methods: reflectance and transmittance. Good agreement (+/-10%) for TC among the three protocols was observed for sample loadings of 1-55 microg m(-3). The two protocols using a reflectance pyrolysis correction showed best agreement for EC, with <20% differences found for approximately 80% of the samples. Hong Kong has a large diesel fleet, and for some heavily loaded samples the light transmittance was too low for quantitative detection, resulting in large uncertainties in the OC/EC split based on transmittance. Hong Kong experienced OC levels similar to those at US sites, but has much higher EC concentrations. OC/EC ratios range from 2 to 5 at two US sites and from 0.2 to 1.2 at three Hong Kong sites.     

Study of oil-water partitioning of a chemical dispersant using an acute bioassay with marine crustaceans

The toxicity of seawater dispersions of a chemical dispersant to two marine crustaceans was investigated in the presence and absence of various quantities of a non-toxic mineral oil. From the results and a physical-chemical partitioning analysis, a limiting value of the oil-water partition coefficient of the toxic compounds is deduced suggesting that essentially all of the toxic compounds in the dispersant will partition into solution in water following dispersant application to an oil spill. This conclusion simplifies interpretation and prediction of the toxic effects of a dispersed oil spill.The combined bioassay-partitioning procedure may have applications to the study of the toxicity of other complex mixtures such as industrial effluents.     

Exploiting plant metabolism for the phytoremediation of persistent herbicides

Weed control by herbicides has helped us to create the green revolution and to provide food for at least the majority of human beings living today. However, some herbicides remain in the environment and pose an ecological problem. The present review describes the properties and fate of four representative herbicides known to be presistent in ecosystems. Metabolic networks are depicted and it is concluded that removal of these compounds by the ecologically friendly technique of phytoremediation is possible. The largest problem is seen in the uptake of the compounds into suitable plants and the time needed for such an approach.     

Chapter three: methodology of exposure modeling

In this chapter, the concept of exposure assessment and its evolution is introduced, and evaluated by critically appraising the pertinent literature as it applies to exposures to Particulate Matter (PM). Exposure measurement or estimation methodologies and models are reviewed. Three exposure/measurement methodologies are assessed. Estimation methods focus on source evaluation and attribution, sources include those outdoors and indoors as well as in occupational and in-transit environments. Fate and transport models and their inputs are addressed to estimate concentrations outdoors and indoors; source attribution techniques help focus on the contributing sources. Activity pattern techniques are also reviewed and their use in exposure models to estimate inhalation exposure to PM is presented. Deterministic, regression and other stochastic models of exposure to PM are reviewed and evaluated. Strengths, limitations, assumptions and affirmations of the use of exposure assessment as an integral component of risk assessment and risk management are discussed in the conclusions and discussions section of this work.     

Rückst?nde und Kontaminanten in Lebensmitteln 29. und 30. Oktober 2002, Atrium Hotel, Mainz

Tagungsakündigungen

Rückst?nde und Kontaminanten in Lebensmitteln 29. und 30. Oktober 2002, Atrium Hotel, Mainz     

UDS-test with freon 11 (R-11)

Trichlorofluoromethane, in concentrations of 80, 400, 2 000, 10 000 and 50 000 ppm, was administered to rats of both sexes (Sprague Dawley) by inhalation exposure. 2 000 ppm in air (= 11 200 mg/m³) amount to twice the MAK value of 1 000 ppm. At exposure times of 4 hours this corresponds to the MAK value defined for an 8 hour workday. Unscheduled DNA synthesis (UDS) was measured in single-cell suspensions of hepatocytes, pulmonary epithelial cells and lymphocytes of the spleen, respectively. In the pulmonary cells concentrations of 2 000, 10 000 and 50 000 ppm of freon 11 lead to a significantly increased mean silver grain count compared to a negative control group. In spleen and liver cells increasing concentrations of R 11 tend to increase the incorporation of thymidine into the DNA of the cells. These changes of the extent of unscheduled DNA synthesis can, however, not be statistically verified.     

The SeKT joint research project: definition of reference conditions, control sediments and toxicity thresholds for limnic sediment contact tests

- In current biotest approaches, intact organisms or in vitro systems are exposed to sediments using different exposure scenarios. The most important issue in sediment toxicity testing protocols is the question which test phase (solid or liquid) should be used. Whole-sediment exposure protocols represent the most realistic scenario to simulate in situ exposure conditions in the laboratory. However, until now there is no agreement in how to acquire and to evaluate the data of the various available sediment contact assays. The SeKT joint research project was initiated with the aim to compare recently developed sediment contact assays by addressing reference conditions, control sediments and toxicity thresholds for limnic sediment contact tests.     

Modelling of sequential groundwater treatment with zero valent iron and granular activated carbon

Multiple contaminant mixtures in groundwater may not efficiently be treated by a single technology if contaminants possess rather different properties with respect to sorptivity, solubility, and degradation potential. An obvious choice is to use sequenced units of the generally accepted treatment materials zero valent iron (ZVI) and granular activated carbon (GAC). However, as the results of this modelling study suggest, the required dimensions of both reactor units may strongly differ from those expected on the grounds of a contaminant-specific design. This is revealed by performing an analysis for a broad spectrum of design alternatives through numerical experiments for selected patterns of contaminant mixtures consisting of monochlorobenzene, tetrachloroethylene, trichloroethylene (TCE), cis-1,2-dichloroethylene (cis-DCE), and vinyl chloride (VC). It is shown that efficient treatment can be achieved only if competitive sorption effects in the GAC unit as well as the formation of intermediate products in the ZVI unit are carefully taken into account. Cost-optimal designs turned out to vary extremely depending on the prevailing conditions concerning contaminant concentrations, branching ratios, and unit costs of both reactor materials. Where VC is the critical contaminant, due to high initial concentration or extensive production as an intermediate, two options are cost-effective: an oversized ZVI unit with an oversized GAC unit or a pure GAC reactor.