Accumulation and phytoavailability of benzo[a]pyrene in an acid sandy soil

Effects of benzo[a]pyrene (B[a]P) on ryegrass (Lolium perenne L.) growth, plant accumulation and dissipiation of B[a]P in a red sandy soil (Hapli-Udic Argosol) were studied in a pot experiment. The plants were grown for 61 days in soil spiked with B[a]P at 0, 12.5, 25 and 50 mg kg⁻¹. Control pots without plants were also set up. Soil extractable B[a]P, plant shoot and root biomass, and concentrations of B[a]P in plant shoots and roots were determined. Ryegrass biomass was increased by addition of B[a]P and root B[a]P concentrations were significantly correlated with B[a]P application rate, but no such correlation was found for shoot B[a]P concentrations. This indicates that B[a]P enhanced the growth of the ryegrass. The extractable B[a]P concentration in the planted soil was significantly lower than that in the unplanted control soil at the rate of 50 mg B[a]P kg⁻¹. This indicates that ryegrass may help to dissipate B[a]P in soil at concentrations over 50 mg kg⁻¹ soil although the mechanism for this is not understood.     

Young driver risk in relation to parents' retrospective driving record

PROBLEM: Parents are an important potential influence on the driving safety of their children. This study examined the relationship of parental driving record on male and female offspring's at-fault collision risk. METHOD: Drivers aged 16-21 on the date of full licensure were selected from driver records and a matching process was used to identify putative parents in two-parent households. Poisson regression models were developed to predict at-fault collisions of male and female youth in the three years following full licensure from parents' at-fault collisions, speeding offenses, and other moving offenses in the four years prior to children's licensure. One set of models examined the relative risk associated with increasing numbers of maternal and paternal at-fault collisions and offenses. Other models examined the joint versus separate maternal and parental contributions. RESULTS: Controlling for region of residence, both mothers' and fathers' at-fault collisions were associated with an increased risk in both male and female youth at-fault collisions. Mothers' and fathers' speeding offenses were also associated with increased relative risk of at-fault collisions for both sons and daughters, while fathers' other moving offenses increased collision risk for sons but not daughters. DISCUSSION: Further research is required to identify how parental driving risk is transmitted to children. IMPACT ON INDUSTRY: (a) Parents of young children should be informed of their role in influencing their children's future driving risk; (b) The results identify risk factors that could be of interest to licensing authorities and the insurance industry.     

Changes in earth’s dipole

The dipole moment of Earth’s magnetic field has decreased by nearly over the past 150 years and by about 30% over the past 2,000 years according to archeomagnetic measurements. Here, we explore the causes and the implications of this rapid change. Maps of the geomagnetic field on the core–mantle boundary derived from ground-based and satellite measurements reveal that most of the present episode of dipole moment decrease originates in the southern hemisphere. Weakening and equatorward advection of normal polarity magnetic field by the core flow, combined with proliferation and growth of regions where the magnetic polarity is reversed, are reducing the dipole moment on the core–mantle boundary. Growth of these reversed flux regions has occurred over the past century or longer and is associated with the expansion of the South Atlantic Anomaly, a low-intensity region in the geomagnetic field that presents a radiation hazard at satellite altitudes. We address the speculation that the present episode of dipole moment decrease is a precursor to the next geomagnetic polarity reversal. The paleomagnetic record contains a broad spectrum of dipole moment fluctuations with polarity reversals typically occurring during dipole moment lows. However, the dipole moment is stronger today than its long time average, indicating that polarity reversal is not likely unless the current episode of moment decrease continues for a thousand years or more.     

Decomposition of silicate minerals by Bacillus mucilaginosus in liquid culture

The extraction of K⁺ and SiO₂ from silicate minerals by Bacillus mucilaginosus in liquid culture was studied in incubation experiments. B. mucilaginosus was found to dissolve soil minerals and mica and simultaneously release K⁺ and SiO₂ from the crystal lattices. In contrast, the bacterium did not dissolve feldspar. B. mucilaginosus also produced organic acids and polysaccharides during growth. The polysaccharides strongly adsorbed the organic acids and attached to the surface of the mineral, resulting in an area of high concentration of organic acids near the mineral. The polysaccharides also adsorbed SiO₂ and this affected the equilibrium between the mineral and fluid phases and led to the reaction toward SiO₂ and K⁺ solubilization. These two processes led to the decomposition of silicate minerals by the bacterium.     

Toxicity of uranium and copper individually, and in combination, to a tropical freshwater macrophyte (Lemna aequinoctialis)

Copper (Cu) and uranium (U) are of potential ecotoxicological concern to tropical freshwater biota in northern Australia, as a result of mining activities. Few data are available on the toxicity of U, and no data are available on the toxic interaction of Cu and U, to freshwater biota. This study determined the toxicity of Cu and U individually, and in combination, to a tropical freshwater macrophyte, Lemna aequinoctialis (duckweed), in a synthetic soft water (27 degrees C; pH, 6.5; hardness, 40 mg CaCO3 l-1, alkalinity, 16 mg CaCO3 l-1), typical of many fresh surface waters in coastal northern Australia. The growth rate of L. aequinoctialis decreased with increasing Cu or U concentrations, with the concentration of Cu inhibiting growth by 50% (EC50) being 16+/-1.0 microg l-1, with a minimum detectable effect concentration (MDEC) of 3.2 microg l-1. The concentration of U inhibiting growth by 50% (EC50) was 758+/-35 microg l-1 with a MDEC of 112 microg l-1. The EC50 value for the exposure of L. aequinoctialis to equitoxic mixtures of Cu and U was significantly (P0.05) higher than one toxic unit (1.35; 95% confidence interval, 1.18-1.52), indicating that the combined effects of Cu and U are less than additive (antagonistic). Therefore, inhibition of the growth rate of L. aequinoctialis was reduced when Cu and U were present in equitoxic mixtures, relative to individual metal exposures. Since non-additive (e.g. antagonistic) interactions of metal mixtures cannot be predicted using current mixture models, these results have important potential implications for the protection of freshwater ecosystems through the derivation of national water quality guidelines.     

Copper complexation by tannic acid in aqueous solution

The speciation of titrated copper in a dissolved tannic acid (TA) solution with an initial concentration of 4 mmol organic carbon (OC)/l was investigated in a nine-step titration experiment (Cu/OC molar ratio = 0.0030–0.0567). We differentiated between soluble and insoluble Cu species by 0.45 μm filtration. Measurements with a copper ion selective electrode (ISE) and diffusive gradients in thin films (DGT) were conducted to quantify unbound Cu(II) cations (‘free’ Cu) and labile soluble Cu complexes. For the DGT measurements, we used an APA hydrogel and a Chelex 100 chelating resin (Na form). Insoluble organic Cu complexes (>0.45 μm) was the dominant Cu species for Cu/OC = 0.0030–0.0567 with a maximum fraction of 0.96 of total Cu. At Cu/OC > 0.0100, Cu-catalysed degradation of aggregate structures resulted in a strong increase of free Cu and (labile) soluble Cu complexes with a maximum fraction of 0.28 and 0.32 of total Cu, respectively. Labile (i.e. DGT-detectable) soluble Cu complexes had a relatively high averaged diffusion coefficient (D) in the APA hydrogel (3.50 × 10⁻⁶– 5.58 × 10⁻⁶ cm² s⁻¹).     

Levels and trends of brominated flame retardants in the European environment

In this paper, we review those data which have recently become available for brominated flame retardants (particularly the brominated diphenyl ethers (BDEs) and hexabromocyclododecane (HBCD)) in samples from the European environment. Environmental compartments studied comprise the atmosphere, sediments and soils, sewage sludges, and a variety of biological samples and food chains. This is currently a very active research area, and we cite over 70 studies reported in the literature during 2003-04. Findings include that the input of BDEs (especially BDE209) to the Baltic Sea by atmospheric deposition now exceeds that of PCBs by a factor of almost 40 times. Sewage sludge samples from both industrial and background locations show concentrations of BDEs, HBCD and tetrabromobisphenol-A (TBBP-A) that are of a similar order, indicating that the major source is from diffuse leaching from products into wastewater streams from users, households and industries generally. Point-sources from industries using BFRs (e.g. the textile industry) also generate local hot-spots. Sediment core studies identified the presence of two of the three PBDE formulations. The penta-mix formulation was clearly present from the beginning of the 1970s, but the deca-mix only appeared in the late 1970s. BDE183, BDE209 and HBCD were detected in peregrine falcons from Sweden and other birds feeding on terrestrial food chains. BDEs are found widely distributed in fish, including those from high mountain lakes in Europe, as a consequence of long-range atmospheric transport and deposition. A temporal trend study in archived freeze-dried mussels from the Seine estuary, France, indicated an exponential increase in BDE concentrations during the period 1982-1993, which levelled off in 1999 and 2001 and then began to decline after 2002. HBCD was detected in liver and blubber samples from harbour seals and harbour porpoises from the Wadden and North Seas, though very few animals yielded positive values for TBBP-A. There are difficulties in comparing data on summation operatorBDE from studies in which different suites of BDE congeners have been determined, and we suggest a common suite which will allow the study of all three commercial PBDE formulations.     

A review and numerical assessment of the random walk particle tracking method

We review the basic mathematical concepts of random walk particle tracking (RWPT) and its advantages and limitations. Three different numerical approaches to overcome the local mass conservation problem of the random walk methodology are examined: (i) the interpolation method, (ii) the reflection principle, and (iii) the generalized stochastic differential equations (GSDE). Analytical solutions of the spatial moments for a two-layer system are compared to model predictions using the different techniques and results demonstrate that the interpolation method reproduces correctly average velocity, but fails to reproduce macrodispersion at higher hydraulic conductivity contrasts between the two layers. On the contrary, the reflection principle and the GSDE approach underestimate average velocity, but reproduce macrodispersion better for high contrasts. The different behavior is based on an artificial shift of mass for increasing heterogeneities for the GSDE approach and the reflection principle, whereas the interpolation method suffers from the smoothing of the dispersion tensor. The behavior of these approaches was furthermore analyzed in two-dimensional heterogeneous hydraulic conductivity fields, which are characterized by different random function models. Solute transport was simulated correctly by all three approaches for the reference fields having Gaussian structures or non-Gaussian structures with an isotropic spatial correlation, even for a variance of the natural log of hydraulic conductivity of sigma(lnK)(2)=4. However, for the non-Gaussian model with a strong anisotropic spatial correlation and a variance of sigma(lnK)(2)=2 and higher, the interpolation method was the only technique modelling solute transport correctly. Furthermore, we discuss the general applicability of random walk particle tracking in comparison to the standard transport models and conclude that in advection-dominated problems using a high spatial discretization or requiring the performance of many model runs, RWPT represents a good alternative for modelling contaminant transport.     

Combined application of conservative transport modelling and compound-specific carbon isotope analyses to assess in situ attenuation of benzene, toluene, and o-xylene

In recent years, compound specific isotope analyses (CSIA) have developed into one of the most powerful tools for the quantification of in situ biodegradation of organic contaminants. In this approach, the calculation of the extent of biodegradation of organic contaminants in aquifers is usually based on the Rayleigh equation, and thus neglects physical transport processes such as dispersion that contribute to contaminant dilution in aquifers. Here we combine compound specific isotope analyses with a conservative transport model to study the attenuation of aromatic hydrocarbons at a former gasworks site. The conservative transport model was first used to simulate concentration reductions caused by dilution at wells downgradient of a BTEX source. In a second step, the diluted concentrations, together with the available stable carbon isotope ratios and carbon fractionation factors for benzene, toluene and o-xylene were applied in the Rayleigh equation to quantify the degree of biodegradation at each of those wells. At the investigated site, where other attenuation processes such as sorption and volatilisation were proven to be negligible, the combined approach is recommended for benzene, which represents a compound for which the effect of biodegradation is comparable to or less than the effect of dilution. As demonstrated for toluene and o-xylene, the application of the Rayleigh equation alone is sufficient if dilution can be proved to be insignificant in comparison to biodegradation. The analysis also suggests that the source width and the position of the observation wells relative to the plume center line are significantly related to the degree of dilution.     

Effects of heavy-metal-contaminated soil on growth, phenology and biomass turnover of Hieracium piloselloides

The effects of low levels of heavy metals on plant growth, biomass turnover and reproduction were investigated for Hieracium pilosella. Plants were grown for 12 weeks on substrates with different concentrations of heavy metals obtained by diluting contaminated soils with silica sand. To minimize effects of other soil factors, the substrates were limed, fertilized, and well watered. The more metal-contaminated soil the substrate contained, the lower the leaf production rate and the plant mass were, and the more the phenological development was delayed. Flowering phenology was very sensitive to metals. Leaf life span was reduced at the highest and the lowest metal levels, the latter being a result of advanced seed ripening. Even if the effect of low metal levels on plant growth may be small, the delayed and reduced reproduction may have large effects at population, community and ecosystem level, and contribute to rapid evolution of metal tolerance.