Vertical profile of PCDD/Fs, dioxin-like PCBs, other PCBs, PAHs, chlorobenzenes, DDX, HCHs, organotin compounds and chlorinated ethers in dated sediment/soil cores from flood-plains of the river Elbe, Germany

Concentrations of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and other organic micropollutants were determined in dated sediment/soil cores collected from the flood-plain of the river Elbe near Pevestorf (PT), approximately 125 km upstream of Hamburg, and Heuckenlock (HL) in southeast of Hamburg. Concentrations of PCDD/Fs peaked sharply at PT in the 1950s and at HL at the end of the 1940s. Cluster analyses provide evidence that the region of Bitterfeld-Wolfen (about 350-400 km upstream of Hamburg) could be the source of the PCDD/F contamination existing in the cores PT and HL since the 1940s. Obviously it is caused by sediments of the river Elbe of a similar composition. Whereas the PCDD/Fs, HCHs (hexacyclohexane isomers), DDX (DDT, DDD, DDE), and tetrachlorinated ethers in PT and HL presumably originated predominantly from the Bitterfeld-Wolfen region, organotin compounds in HL and dichlorinated haloethers in HL during the 1940s and 1950s can probably largely be attributed to emissions from the Hamburg region. Although they are separated by a large distance, in both sediment cores PT and HL concentrations and composition patterns of most organic micropollutants analyzed widely match. Inductively it can be concluded that similar contaminations will be found in many of the river bank soils between the Bitterfeld-Wolfen region and Hamburg. Excavation of top soils may uncover highly contaminated materials. Since the dated sediment cores show the variation in contaminants in the Elbe sediments over a defined time period, it is possible to make an approximate assessment of the actual degree of contamination to be expected in areas where in previous decades contaminated dredged sediments from the Elbe and from the Port of Hamburg have been deposited on land and used for building plots or for agricultural purposes.     

Review of state of the art methods for measuring water in landfills

In recent years several types of sensors and measurement techniques have been developed for measuring the moisture content, water saturation, or the volumetric water content of landfilled wastes. In this work, we review several of the most promising techniques. The basic principles behind each technique are discussed and field applications of the techniques are presented, including cost estimates. For several sensors, previously unpublished data are given. Neutron probes, electrical resistivity (impedance) sensors, time domain reflectometry (TDR) sensors, and the partitioning gas tracer technique (PGTT) were field tested with results compared to gravimetric measurements or estimates of the volumetric water content or moisture content. Neutron probes were not able to accurately measure the volumetric water content, but could track changes in moisture conditions. Electrical resistivity and TDR sensors tended to provide biased estimates, with instrument-determined moisture contents larger than independent estimates. While the PGTT resulted in relatively accurate measurements, electrical resistivity and TDR sensors provide more rapid results and are better suited for tracking infiltration fronts. Fiber optic sensors and electrical resistivity tomography hold promise for measuring water distributions in situ, particularly during infiltration events, but have not been tested with independent measurements to quantify their accuracy. Additional work is recommended to advance the development of some of these instruments and to acquire an improved understanding of liquid movement in landfills by application of the most promising techniques in the field.     

Evaluation of methods for sorting CCA-treated wood

Construction and demolition (C&D) wood frequently contains treated wood including wood treated with chromated copper arsenate (CCA). Many recycling options for such wood require that the product be essentially free of preservative chemicals. The objectives of this study were to document the characteristics of the wood waste stream and to evaluate the effectiveness of sorting methods for identifying treated wood. Sorting methods evaluated included visual sorting and visual sorting augmented with the use of PAN indicator stain and/or hand-held X-ray fluorescence (XRF) units. Experiments were conducted on two types of construction and demolition (C&D) wood: source separated loads containing only C&D wood and wood hand-picked from commingled loads of general C&D waste. Results showed that 77% of the treated wood was CCA-treated. For uncontaminated piles (<1% treated wood) of source separated C&D wood, visual sorting was found to effectively remove the small amounts of treated wood present. For piles of source separated wood that were contaminated (approximately 50% treated wood), visual sorts were not accurate and benefited from augmented sorting using PAN indicator stain. The handheld XRF devices were found to be effective for sorting commingled C&D wood, as PAN indicator stain was not as effective due to the excessive amount of surface dirt associated with commingled wood waste. Visual sorting of source separated wood was estimated to cost between US$21 to US$96 per metric ton. These costs depended upon the amount of treated wood and whether or not augmentation with PAN indicator was necessary. Visual sorting augmented with hand-held XRF units was estimated at US$113 per metric ton. The bulk of these costs were associated with labor. Future efforts should focus on reducing labor costs by mounting automated XRF units on conveyor systems.     

Use of inert C&D materials for seawall foundation: quality control measures

The technical viability of using inert construction and demolition (C&D) materials for the construction of seawall and breakwater foundations has been established by laboratory testing of the materials, numerical analysis of foundation stability, and a pilot field-scale engineering performance evaluation. However, quality control measures are still required so that only suitable materials are used for seawall and breakwater foundation construction. The development of different quality control measures for different site conditions is presented in this paper. The rationale, practicality, and implementation of these quality control measures are also discussed.     

Evaluation of commercial landscaping mulch for possible contamination from CCA

Wood treated with chromated copper arsenate (CCA) is found in construction and demolition (C&D) debris, and a common use for wood recycled from C&D debris is the production of mulch. Given the high metals concentrations in CCA-treated wood, a small fraction of CCA-treated wood can increase the metal concentrations in the mulch above regulatory thresholds. The objective of this study was to determine the extent of contamination of CCA-treated wood in consumer landscaping mulch and to determine whether visual methods or rapid X-ray fluorescence (XRF) technology can be used to identify suspect mulch. Samples were collected throughout the State of Florida (USA) and evaluated both visually and chemically. Visual analysis focused on documenting wood-chip size distribution, whether the samples were artificially colored, and whether they contained plywood chips which is an indication that the sample was, in part, made from recycled C&D wood. Chemical analysis included measurements of total recoverable metals, leachable metals as per the standardized synthetic precipitation leaching procedure (SPLP), and XRF analysis. Visual identification methods, such as colorant addition or presence of plywood, were found effective to preliminarily screen suspect mulch. XRF analysis was found to be effective for identifying mulch containing higher than 75 mg/kg arsenic. For mulch samples that were not colored and did not contain evidence of C&D wood, none exceeded leachable metal concentrations of 50 microg/L and only 3% exceeded 10 mg/kg for recoverable metals. The majority of the colored mulch made from recycled C&D wood contained from 1% to 5% CCA-treated wood (15% maximum fraction) resulting in leachable metals in excess of 50 microg/L and total recoverable metals in excess of 10 mg/kg. The maximum arsenic concentration measured in the mulch samples evaluated was 230 mg/kg, which was above the Florida residential direct exposure regulatory guideline of 2.1 mg/kg.     

A review of Henry's law coefficients for chlorine-containing C1 and C2 hydrocarbons

Experimentally determined Henry's law coefficients of 18 chlorinated C(1) and C(2) hydrocarbons reported in the literature as a function of temperature and at the single temperatures 20 and 25 degrees C were compiled and converted to common units of concentration and pressure: K(H) (moldm(-3)atm(-1)). The individual values are plotted in the ln(K(H)) versus reciprocal absolute temperature coordinate frame, data not in harmony with others were deleted, and the resulting data sets treated by linear regression analysis to derive averaged parameters in the general equation ln(K(H))=A+B/T. The quality of the evaluation was further checked by comparison of values calculated from the resulting parameter values with averages obtained from the direct measurements at 20 degrees C. Good agreement was observed for 15 compounds, larger discrepancies arise only for chloroethane, 1,2-dichloroethane and hexachloroethane. In all three cases the data base is poor and needs to be improved. The results are used to derive heats of solution for the C(1) and C(2) chlorinated hydrocarbons in water, Gibbs energies of solution and standard Henry's law coefficients at 298.15K. Henry's law coefficients calculated from the ratio of solubility of the compound in water and the saturation vapor pressure of the pure compound reported by Sangster [Sangster, J.M., 2003. Henry's law constants for compounds stable in water. In: Fogg, P.G.T., Sangster, J.M. (Eds.), Chemicals in the Atmosphere - Solubility, Sources and Reactivity. Wiley, Chichester, West Sussex, England, pp. 255-397] provide good agreement with the experimental data in eight out of eleven cases treated.     

How Plants Cope with Foreign Compounds. Translocation of xenobiotic glutathione conjugates in roots of barley (Hordeum vulgare) (9 pp)

Background, Aim and Scope Numerous herbicides and xenobiotic organic pollutants are detoxified in plants to glutathione conjugates. Following this enzyme catalyzed reaction, xenobiotic GS-conjugates are thought to be compartmentalized in the vacuole of plant cells. In the present study, evidence is presented for long range transport of these conjugates in plants, rather than storage in the vacuole. To our knowledge this is the first report about the unidirectional long range transport of xenobiotic conjugates in plants and the exudation of a glutathione conjugate from the root tips. This could mean that plants possess an excretion system for unwanted compounds which give them similar advantages as animals. Materials and Methods: Barley plants (Hordeum vulgare L. cv. Cherie) were grown in Petri dishes soaked with tap water in the greenhouse. - Fluorescence Microscopy. Monobromo- and Monochlorobimane, two model xenobiotics that are conjugated rapidly in plant cells with glutathione, hereby forming fluorescent metabolites, were used as markers for our experiments. Their transport in the root could be followed sensitively with very good temporal and spatial resolution. Roots of barley seedlings were cut under water and the end at which xenobiotics were applied was fixed in an aperture with a thin latex foil and transferred into a drop of water on a cover slide. The cover slide was fixed in a measuring chamber on the stage of an inverse fluorescence microscope (Zeiss Axiovert 100). - Spectrometric enzyme assay. Glutathione S-transferase (GST) activity was determined in the protein extracts following established methods. Aliquots of the enzyme extract were incubated with 1-chloro-2,4-dinitrobenzene (CDNB), or monochlorobimane. Controls lacking enzyme or GSH were measured. - Pitman chamber experiments. Ten days old barley plants or detached roots were inserted into special incubation chambers, either complete with tips or decapitated, as well as 10 days old barley plants without root tips. Compartment A was filled with a transport medium and GSH conjugate or L-cysteine conjugate. Compartments B and C contained sugar free media. Samples were taken from the root tip containing compartment C and the amount of conjugate transported was determined spectro-photometrically. Results: The transport in roots is unidirectional towards the root tips and leads to exsudation of the conjugates at rates between 20 and 200 nmol min-1. The microscopic studies have been complemented by transport studies in small root chambers and spectroscopic quantification of dinitrobenzene-conjugates. The latter experiments confirm the microscopic studies. Furthermore it was shown that glutathione conjugates are transported at higher rates than cysteine conjugates, despite of their higher molecular weights. This observation points to the existence of glutathione specific carriers and a specific role of glutathione in the root. Discussion: It can be assumed that long distance transport of glutathione conjugates within the plant proceeds like GSH or amino acid transport in both, phloem and xylem. The high velocity of this translocation of the GS-X is indicative of an active transport. For free glutathione, a rapid transport-system is essential because an accumulation of GSH in the root tip inhibits further uptake of sulfur. Taking into account that all described MRP transporters and also the GSH plasmalemma ATPases have side activities for glutathione derivatives and conjugates, co-transport of these xenobiotic metabolites seems credible. - On the other hand, when GS-B was applied to the root tips from the outside, no significant uptake was observed. Thus it can be concluded that only those conjugates can be transported in the xylem which are formed inside the root apex. Having left the root once, there seems to be no return into the root vessels, probably because of a lack of inward directed transporters. Conclusions: Plants seem to possess the capability to store glutathione conjugates in the vacuole, but under certain conditions, these metabolites might also undergo long range transport, predominantly into the plant root. The transport seems dependent on specific carriers and is unidirectional, this means that xenobiotic conjugates from the rhizosphere are not taken up again. The exudation of xenobiotic metabolites offers an opportunity to avoid the accumulation of such compounds in the plant. Recommendations and Perspectives: The role of glutathione and glutathione related metabolites in the rhizosphere has not been studied in any detail, and only scattered data are available on interactions between the plant root and rhizosphere bacteria that encounter such conjugates. The final fate of these compounds in the root zone has also not been addressed so far. It will be interesting to study effects of the exuded metabolites on the biology of rhizosphere bacteria and fungi.     

Toxic effects of low concentrations of Cu on nodulation of cowpea (Vigna unguiculata)

Although Cu is phytotoxic at Cu(2+) activities as low as 1-2 microM, the effect of Cu(2+) on the nodulation of legumes has received little attention. The effect of Cu(2+) on nodulation of cowpea (Vigna unguiculata (L.) Walp. cv. Caloona) was examined in a dilute solution culture system utilising a cation exchange resin to buffer solution Cu(2+). The nodulation process was more sensitive to increasing Cu(2+) activities than both shoot and root growth; whilst a Cu(2+) activity of 1.0 microM corresponded to a 10% reduction in the relative yield of the shoots and roots, a Cu(2+) activity of 0.2 microM corresponded to a 10% reduction in nodulation. This reduction in nodulation with increasing Cu(2+) activity was associated with an inhibition of root hair formation in treatments containing > or =0.77 microM Cu(2+), rather than to a reduction in the size of the Rhizobium population.     

Maternal investment in rhesus macaques (Macaca mulatta): reproductive costs and consequences of raising sons

Maternal investment in offspring is expected to vary according to offspring sex when the reproductive success of the progeny is a function of differential levels of parental expenditure. We conducted a longitudinal investigation of rhesus macaques to determine whether variation in male progeny production, measured with both DNA fingerprinting and short tandem repeat marker typing, could be traced back to patterns of maternal investment. Males weigh significantly more than females at birth, despite an absence of sex differences in gestation length. Size dimorphism increases during infancy, with maternal rank associated with son’s, but not daughter’s, weight at the end of the period of maternal investment. Son’s, but not daughter’s, weight at 1 year of age is significantly correlated with adult weight, and male, but not female, weight accounts for a portion of the variance in reproductive success. Variance in annual offspring output was three- to fourfold higher in males than in females. We suggest that energetic costs of rearing sons could be buffered by fetal delivery of testosterone to the mother, which is aromatized to estrogen and fosters fat accumulation during gestation. We conclude that maternal investment is only slightly greater in sons than in daughters, with mothers endowing sons with extra resources because son, but not daughter, mass has ramifications for offspring sirehood. However, male reproductive tactics supersede maternal investment patterns as fundamental regulators of male fitness. Received: 23 July 1999 / Received in revised form: 23 February 2000 / Accepted: 13 March 2000