Two distinct forms of the chitin-degrading enzyme N-acetyl-β-d-glucosaminidase in the Antarctic krill: specialists in digestion and moult

In the Antarctic krill Euphausia superba two forms of the chitinolytic enzyme N-acetyl-β-d-glucosaminidase (NAGase, EC 3.2.1.52) have been described, previously identified as NAGase B and NAGase C. Here, we demonstrate the organ-specific distribution and physiological relevance of both forms using a polyclonal antibody preparation which allows them to be distinguished immunologically. While NAGase B was localized in the integument and displayed a pattern of activity related to the moult cycle, the activity of NAGase C was independent of the moult cycle and was predominantly found in the gastrointestinal tract. Accordingly, NAGase B played a significant role in chitin degradation during the krill's moult, whereas NAGase C participated in the digestion of chitin-containing dietary components. Chromatographic elution profiles of isolated organs confirmed the immunological results by displaying characteristic organ-specific patterns in NAGase activity. The molecular characteristics of the moulting form, NAGase B, may further indicate a vesicular transport of moulting enzymes from the epidermis into the ecdysial space. Based on our results we develop a hypothesis explaining the concurrent processes of simultaneous chitin degradation and chitin synthesis occurring during moult. Received: 30 December 1998 / Accepted: 23 April 1999     

Changes in microbiological metabolism under chemical stress

Chemical stress may alter microbiological metabolism and this, in turn, may affect the natural and engineered systems where these organisms function. The impact of chemical stress on microbiological metabolism was investigated using model chemicals 2,4-dinitrophenol (DNP), pentachlorophenol (PCP), and N-ethylmaleimide (NEM). Biological activity of Pseudomonas aeruginosa was measured in batch systems, with and without stressors at sub-lethal concentrations. Stressor DNP, between 49 and 140 mg l(-1), and PCP, at 15 and 38 mg l(-1), caused decreases in biomass growth yields, but did not inhibit substrate utilization rates. These effects increased with stressor concentrations, showing as much as a 10% yield reduction at the highest DNP concentration. This suggests that a portion of carbon and energy resources are diverted from growth and used in stress management and protection. Stressor DNP, between 300 and 700 mg l(-1), and PCP at 85 mg l(-1) caused decreases in growth yields and substrate utilization rates. This suggests an inhibition of both anabolism and catabolism. Stressor NEM was the most potent, inhibiting biological activity at concentrations as low as 2.7 mg l(-1). These findings will ultimately be useful in better monitoring and management of biological treatment operations and contaminated natural systems.     

Applying the three R’s: Reduce,reuse, and recycle in the chemical industry

Pollution prevention (P2) assessment was conducted by applying the three R’s, reduce, reuse, and recycle, in a chemical industry for the purpose of reducing the amount of wastewater generated, reusing paint wastewater in the manufacture of cement bricks, recycling cooling water, and improving water usage efficiency. The results of this study showed that the annual wastewater flow generated from the paint manufacturing can be reduced from 1,100 m³ to 488.4 m³ (44.4% reduction) when a high-pressure hose is used. Two mixtures were prepared. The first mixture (A) contains cement, coarse aggregate, fine aggregate, Addicrete BVF, and clean water. The second mixture (B) contains the same components used in the first mixture, except that paint wastewater was used instead of the clean water. The prepared samples were tested for water absorption, toxicity, reactivity, compressive strength, ignitability, and corrosion. The tests results indicated that using paint wastewater in the manufacture of the cement bricks improved the mechanical properties of the bricks. The toxicity test results showed that the metals concentration in the bricks did not exceed the U.S. EPA limits. This company achieved the goal of zero liquid discharge (ZLD), especially after recycling 2,800 m³ of cooling water. The total annual saving could reach $42,570 with a payback period of 41 days.

Implications: This research focused on improving the water usage efficiency, reducing the quantity of wastewater generated, and potentially reusing wastewater in the manufacture of cement bricks. Reusing paint wastewater in the manufacture of the bricks prevents the hazardous pollutants in the wastewater (calcium carbonate, styrene acrylic resins, colored pigments, and titanium dioxide) from entering and polluting the surface water and the environment. We think that this paper will help to find the most efficient and cost-effective way to manage paint wastewater and conserve fresh water resources. We also believe that this paper provides a rich agenda for future research in water conservation and industrial wastewater reuse subjects.     

Reuse paint wastewater in the manufacture of cement bricks and tiles

Journal of Material Cycles and Waste Management - Waste management is one of the most important and serious issues facing many developing countries. The main purpose of this research involves...     

Perspectives on quantifying and influencing household metabolism

Household metabolism is a concept that is concerned with the analysis of stocks and flows of energy, matter, and information at the household scale. This paper starts by providing a brief overview of the concept of household metabolism. Rather than attempting an in-depth review and analysis of this field, the article subsequently maps the contributions and perspectives of a broad variety of research traditions that have an interface with the concept of household metabolism. Next, this paper highlights a number of controversial issues connected to household metabolism, and studies at the interface of household metabolism. Finally, this paper argues that the concept of household metabolism can provide valuable help in diagnosing misalignments between enacted system dynamics and expressed societal goals, and can help to design research that facilitates their alignment.     

Limitations for brine acidification due to SO2 co-injection in geologic carbon sequestration

Co-injection of sulfur dioxide during geologic carbon sequestration can cause enhanced brine acidification. The magnitude and timescale of this acidification will depend, in part, on the reactions that control acid production and on the extent and rate of SO₂ dissolution from the injected CO₂ phase. Here, brine pH changes were predicted for three possible SO₂ reactions: hydrolysis, oxidation, or disproportionation. Also, three different model scenarios were considered, including models that account for diffusion-limited release of SO₂ from the CO₂ phase. In order to predict the most extreme acidification potential, mineral buffering reactions were not modeled. Predictions were compared to the case of CO₂ alone which would cause a brine pH of 4.6 under typical pressure, temperature, and alkalinity conditions in an injection formation. In the unrealistic model scenario of SO₂ phase equilibrium between the CO₂ and brine phases, co-injection of 1% SO₂ is predicted to lead to a pH close to 1 with SO₂ oxidation or disproportionation, and close to 2 with SO₂ hydrolysis. For a scenario in which SO₂ dissolution is diffusion-limited and SO₂ is uniformly distributed in a slowly advecting brine phase, SO₂ oxidation would lead to pH values near 2.5 but not until almost 400 years after injection. In this scenario, SO₂ hydrolysis would lead to pH values only slightly less than those due to CO₂ alone. When SO₂ transport is limited by diffusion in both phases, enhanced brine acidification occurs in a zone extending only 5 m proximal to the CO₂ plume, and the effect is even less if the only possible reaction is SO₂ hydrolysis. In conclusion, the extent to which co-injected SO₂ can impact brine acidity is limited by diffusion-limited dissolution from the CO₂ phase, and may also be limited by the availability of oxidants to produce sulfuric acid.     

Sterilization affects soil organic matter chemistry and bioaccumulation of spiked p,p′-DDE and anthracene by earthworms

Laboratory experiments were conducted to assess the effects of soil sterilization on the bioavailability of spiked p,p′-DDE and anthracene to the earthworms Eisenia fetida and Lumbricus terrestris. Physical and chemical changes to soil organic matter (SOM) induced by sterilization were also studied. Uptake of both compounds added after soil was autoclaved or gamma irradiated increased for E. fetida. Sterilization had no effect on bioaccumulation of p,p′-DDE by L. terrestris, and anthracene uptake increased only in gamma-irradiated soils. Analyses by FT-IR and DSC indicate sterilization alters SOM chemistry and may reduce pollutant sorption. Chemical changes to SOM were tentatively linked to changes in bioaccumulation, although the effects were compound and species specific. Artifacts produced by sterilization could lead to inaccurate risk assessments of contaminated sites if assumptions derived from studies carried out in sterilized soil are used. Ultimately, knowledge of SOM chemistry could aid predictions of bioaccumulation of organic pollutants.     

Differences in p,p'-DDE bioaccumulation from compost and soil by the plants Cucurbita pepo and Cucurbita maxima and the earthworms Eisenia fetida and Lumbricus terrestris

Two plant species, Cucurbita pepo and Cucurbita maxima, and two earthworm species, Eisenia fetida and Lumbricus terrestris, were exposed to soil and compost with equivalent p,p'-DDE contamination. Pollutant bioconcentration was equal in plant roots in both media, but translocation was higher in C. pepo. Bioaccumulation by E. fetida was approximately 6- and 3-fold higher than that by L. terrestris in the soil and compost, respectively. For all species, p,p'-DDE uptake was significantly greater from soil than from compost; 7- to 8-fold higher for plant roots and 3- to 7-fold higher for worms. Abiotic desorption from soil was approximately twice that from the compost. When all the data are normalized for organic-carbon content of the media, the contaminant is more tightly bound by soil than compost. Although the risk associated with p,p'-DDE is higher in soil than compost, important mechanistic differences exist in contaminant binding to organic carbon in the two media.     

Modelling of occupational respirable crystalline silica exposure for quantitative exposure assessment in community-based case-control studies

We describe an empirical model for exposure to respirable crystalline silica (RCS) to create a quantitative job-exposure matrix (JEM) for community-based studies. Personal measurements of exposure to RCS from Europe and Canada were obtained for exposure modelling. A mixed-effects model was elaborated, with region/country and job titles as random effect terms. The fixed effect terms included year of measurement, measurement strategy (representative or worst-case), sampling duration (minutes) and a priori exposure intensity rating for each job from an independently developed JEM (none, low, high). 23,640 personal RCS exposure measurements, covering a time period from 1976 to 2009, were available for modelling. The model indicated an overall downward time trend in RCS exposure levels of -6% per year. Exposure levels were higher in the UK and Canada, and lower in Northern Europe and Germany. Worst-case sampling was associated with higher reported exposure levels and an increase in sampling duration was associated with lower reported exposure levels. Highest predicted RCS exposure levels in the reference year (1998) were for chimney bricklayers (geometric mean 0.11 mg m(-3)), monument carvers and other stone cutters and carvers (0.10 mg m(-3)). The resulting model enables us to predict time-, job-, and region/country-specific exposure levels of RCS. These predictions will be used in the SYNERGY study, an ongoing pooled multinational community-based case-control study on lung cancer.